CDCE813-Q1

ACTIVO

Sintetizador de reloj programable de 1 PLL y limpiador de fluctuación con salidas de 2,5 V y 3,3 V.

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat CDCE813-Q1 Programmable 1-PLL Clock Synthesizer and Jitter Cleaner With 2.5V and 3.3V Outputs datasheet (Rev. D) (Inglés) PDF | HTML

CDCE813-Q1

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Number of input channels

1

Number of outputs

3

RMS jitter (fs)

50000

Features

Integrated EEPROM

Output frequency (min) (MHz)

0.07

Output frequency (max) (MHz)

230

Output type

LVCMOS

Input type

LVCMOS (REF_CLK)

Operating temperature range (°C)

-40 to 105

Number of input channels

1

Number of outputs

3

RMS jitter (fs)

50000

Features

Integrated EEPROM

Output frequency (min) (MHz)

0.07

Output frequency (max) (MHz)

230

Output type

LVCMOS

Input type

LVCMOS (REF_CLK)

Operating temperature range (°C)

-40 to 105

TSSOP (PW)

14

32 mm² (5 mm × 6.4 mm)

Qualified for automotive applications
AEC-Q100 qualified with the following results:
- Device temperature grade 2: –40°C to 105°C ambient operating temperature range
- Device HBM ESD classification level H2
- Device CDM ESD classification level C6
In-system programmability and EEPROM
- Serial programmable volatile register
- Nonvolatile EEPROM to store customer settings
Flexible input clocking concept
- External crystal: 8MHz to 32MHz
- Single-ended LVCMOS up to 160MHz
Free selectable output frequency up to 230 MHz
Low-noise PLL core
- PLL loop filter components integrated
- Low period jitter (typical 50ps)
1.8V device power supply (core voltage)
Separate output supply pins: 3.3V and 2.5V
Flexible clock driver
- Three user-definable control inputs [S0, S1, S2], for example, SSC selection, frequency switching, output enable, or power down
- Generates highly accurate clocks for video, audio, USB, IEEE1394, RFID, Bluetooth, WLAN, Ethernet, and GPS
- Generates common clock frequencies used with TI- DaVinci™, OMAP™, DSPs
- Programmable SSC modulation
- Enables 0PPM clock generation
Packaged in TSSOP
Development and programming kit for easy PLL design and programming (TI ClockPro™ programming software)

Qualified for automotive applications
AEC-Q100 qualified with the following results:
- Device temperature grade 2: –40°C to 105°C ambient operating temperature range
- Device HBM ESD classification level H2
- Device CDM ESD classification level C6
In-system programmability and EEPROM
- Serial programmable volatile register
- Nonvolatile EEPROM to store customer settings
Flexible input clocking concept
- External crystal: 8MHz to 32MHz
- Single-ended LVCMOS up to 160MHz
Free selectable output frequency up to 230 MHz
Low-noise PLL core
- PLL loop filter components integrated
- Low period jitter (typical 50ps)
1.8V device power supply (core voltage)
Separate output supply pins: 3.3V and 2.5V
Flexible clock driver
- Three user-definable control inputs [S0, S1, S2], for example, SSC selection, frequency switching, output enable, or power down
- Generates highly accurate clocks for video, audio, USB, IEEE1394, RFID, Bluetooth, WLAN, Ethernet, and GPS
- Generates common clock frequencies used with TI- DaVinci™, OMAP™, DSPs
- Programmable SSC modulation
- Enables 0PPM clock generation
Packaged in TSSOP
Development and programming kit for easy PLL design and programming (TI ClockPro™ programming software)

The CDCE813-Q1 device is a modular Phase-locked-loop-based (PLL), low-cost, high-performance, programmable clock synthesizers. They generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL.

The CDCE813-Q1 has separate output supply pins, VDDOUT, providing 2.5V to 3.3V.

The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal.

The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance.

The device supports nonvolatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the I2C bus, a 2-wire serial interface.

The CDCE813-Q1 operates in a 1.8V core environment as well as eliminating the need for additional, independent XTAL oscillators which reduces component count and board size. The device operates in a temperature range of –40°C to 105°C.

The CDCE813-Q1 device is a modular Phase-locked-loop-based (PLL), low-cost, high-performance, programmable clock synthesizers. They generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL.

The CDCE813-Q1 has separate output supply pins, VDDOUT, providing 2.5V to 3.3V.

The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal.

The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance.

The device supports nonvolatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the I2C bus, a 2-wire serial interface.

The CDCE813-Q1 operates in a 1.8V core environment as well as eliminating the need for additional, independent XTAL oscillators which reduces component count and board size. The device operates in a temperature range of –40°C to 105°C.

filter

Buscar otro/a Limpiadores de fluctuación de reloj

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

Documentación principal	Tipo	Título	Opciones de formato	Descargar la versión más reciente en inglés	Fecha
*	Hoja de datos	CDCE813-Q1 Programmable 1-PLL Clock Synthesizer and Jitter Cleaner With 2.5V and 3.3V Outputs datasheet (Rev. D)	PDF \| HTML		8/02/2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

CDCE813 IBIS Model

SNAM227.ZIP (27 KB) - Modelo IBIS

Productos y hardware compatibles

Descargar

Herramienta de diseño

CLOCK-TREE-ARCHITECT — Software de programación de diseño de árbol de reloj

La herramienta de síntesis de tipo árbol de reloj “arquitecto de tipo árbol de reloj” agiliza el proceso de diseño al generar soluciones de árbol de reloj en función de los requisitos del sistema. La herramienta extrae datos de una amplia base de datos de productos de relojes para generar una (...)

Productos y hardware compatibles

Diseñar ahora

Encapsulado	Pines	Símbolos CAD, huellas y modelos 3D
TSSOP (PW)	14	Ultra Librarian

Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

CDCE813-Q1

Sintetizador de reloj programable de 1 PLL y limpiador de fluctuación con salidas de 2,5 V y 3,3 V.

CDCE813-Q1

Detalles del producto

Documentación técnica

Diseño y desarrollo

CDCE813 IBIS Model

CLOCK-TREE-ARCHITECT — Software de programación de diseño de árbol de reloj

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Serie de videos

Videos