CDCEL824

Name: CDCEL824
Brand: TI
SKU: CDCEL824
Price: 0.77 USD

ACTIVO

Sintetizador de reloj programable de 2 PLL con capacidad de espectro extendido

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat CDCEL824 Programmable 2-PLL Clock Synthesizer datasheet (Rev. A) (Inglés) PDF | HTML

CDCEL824

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Function

Clock generator

Number of outputs

4

Output frequency (max) (MHz)

201

Core supply voltage (V)

1.8

Output supply voltage (V)

1.8

Input type

LVCMOS, XTAL

Output type

LVCMOS

Operating temperature range (°C)

-40 to 85

Features

Integrated EEPROM, Spread-spectrum clocking (SSC)

Rating

Catalog

Function

Clock generator

Number of outputs

4

Output frequency (max) (MHz)

201

Core supply voltage (V)

1.8

Output supply voltage (V)

1.8

Input type

LVCMOS, XTAL

Output type

LVCMOS

Operating temperature range (°C)

-40 to 85

Features

Integrated EEPROM, Spread-spectrum clocking (SSC)

Rating

Catalog

TSSOP (PW)

16

32 mm² 5 x 6.4

Flexible Clock Driver
- Three User-Definable Control Inputs
  [S0/S1/S2]: for example, Frequency Switching,
  Output Enable, or Power Down
- Enables 0-PPM Clock Generation
In-System Programmability and EEPROM
- Serial Programmable Volatile Register
- Nonvolatile EEPROM to Store Customer
  Settings
Flexible Input Clocking Concept
- External Crystal: 20 MHz to 30 MHz
- Single-Ended LVCMOS up to 130 MHz
Selectable Output Frequency up to 201 MHz
Low-Noise PLL Core
- PLL Loop Filter Components Integrated
- Low Period Jitter (Typical 80 ps)
1.8-V Device Power Supply
Temperature Range –40°C to 85°C
Packaged in TSSOP

Flexible Clock Driver
- Three User-Definable Control Inputs
  [S0/S1/S2]: for example, Frequency Switching,
  Output Enable, or Power Down
- Enables 0-PPM Clock Generation
In-System Programmability and EEPROM
- Serial Programmable Volatile Register
- Nonvolatile EEPROM to Store Customer
  Settings
Flexible Input Clocking Concept
- External Crystal: 20 MHz to 30 MHz
- Single-Ended LVCMOS up to 130 MHz
Selectable Output Frequency up to 201 MHz
Low-Noise PLL Core
- PLL Loop Filter Components Integrated
- Low Period Jitter (Typical 80 ps)
1.8-V Device Power Supply
Temperature Range –40°C to 85°C
Packaged in TSSOP

The CDCEL824 is a modular PLL-based low-cost, high-performance, programmable clock synthesizer, multiplier, and divider. It generates up to four output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 201 MHz, using up to two independent configurable PLLs.

The CDCEL824 has a separate output supply pins, V_DDOUT, which are 1.8 V.

The input accepts an external crystal or LVCMOS clock signal. In case of a crystal input, an on-chip load capacitor is adequate for most applications. The value of the load capacitor is programmable from 0 pF to 20 pF.

The deep M/N divider ratio allows the generation of zero-ppm audio/video, networking (WLAN, Bluetooth, Ethernet, GPS) or interface (USB, IEEE1394, memory stick) clocks from a 27-MHz reference input frequency, for example.

Based on the PLL frequency and the divider settings, the internal loop filter components are automatically adjusted to achieve high stability and optimized jitter transfer characteristic of each PLL.

The device supports nonvolatile EEPROM programming for easy customization of the device in the application. It is preset to a factory default configuration and can be reprogrammed to a different application configuration before it goes onto the PCB or reprogrammed by in-system programming. All device settings are programmable through the SDA/SCL bus, a 2-wire serial interface.

Three free programmable control inputs, S0, S1, and S2, can be used to select different frequencies, or other control features like outputs disable to low, outputs in high-impedance state, power down, PLL bypass, and so forth.

The CDCx824 operates in a 1.8-V environment in a temperature range of –40°C to 85°C.