Inicio Controladores para motores Drivers para motores de CC sin escobillas (BLDC) Controladores BLDC
Inicio
Controladores para motores
Drivers para motores de CC sin escobillas (BLDC)
Controladores BLDC

DRV8329

ACTIVO

Controlador de puerta trifásico de 60 V con amplificador de detección de corriente único

Haga su pedido ahora
Hoja de datos

DRV8329

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Architecture Gate driver Control interface 3xPWM, 6xPWM Vs (min) (V) 4.5 Vs ABS (max) (V) 65 Features 1x low side current sense, Bootstrap Architecture for Gate Driver, HW based configuration, Supports 100% PWM Duty Cycle with Trickle Charge pump Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Gate driver Control interface 3xPWM, 6xPWM Vs (min) (V) 4.5 Vs ABS (max) (V) 65 Features 1x low side current sense, Bootstrap Architecture for Gate Driver, HW based configuration, Supports 100% PWM Duty Cycle with Trickle Charge pump Operating temperature range (°C) -40 to 125
WQFN (REE) 36 20 mm² 4 x 5
  • 65-V Three Phase Half-Bridge Gate Driver
    • Drives 3 High-Side and 3 Low-Side N-Channel MOSFETs (NMOS)
    • 4.5 to 60-V Operating Voltage Range
    • Supports 100% PWM Duty Cycle with Trickle Charge pump
  • Bootstrap based Gate Driver Architecture
    • 1000-mA Maximum Peak Source Current
    • 2000-mA Maximum Peak Sink Current
  • Integrated Current Sense Amplifier with low input offset (optimized for 1 shunt)
    • Adjustable Gain (5, 10, 20, 40 V/V)
  • Hardware interface provides simple configuration
  • Ultra-low power sleep mode <1 uA at 25 ̊C
  • 4-ns (typ) propagation delay matching between phases
  • Independent driver shutdown path (DRVOFF)
  • 65-V tolerant wake pin (nSLEEP)
  • Supports negative transients upto -10V on SHx
  • 6x and 3x PWM Modes
  • Supports 3.3-V, and 5-V Logic Inputs
  • Accurate LDO (AVDD), 3.3 V ±3%, 80 mA
  • Compact QFN Packages and Footprints
  • Adjustable VDS overcurrent threshold through VDSLVL pin
  • Adjustable deadtime through DT pin
  • Efficient System Design With Power Blocks
  • Integrated Protection Features
    • PVDD Undervoltage Lockout (PVDDUV)
    • GVDD Undervoltage (GVDDUV)
    • Bootstrap Undervoltage (BST_UV)
    • Overcurrent Protection (VDS_OCP, SEN_OCP)
    • Thermal Shutdown (OTSD)
    • Fault Condition Indicator (nFAULT)
  • 65-V Three Phase Half-Bridge Gate Driver
    • Drives 3 High-Side and 3 Low-Side N-Channel MOSFETs (NMOS)
    • 4.5 to 60-V Operating Voltage Range
    • Supports 100% PWM Duty Cycle with Trickle Charge pump
  • Bootstrap based Gate Driver Architecture
    • 1000-mA Maximum Peak Source Current
    • 2000-mA Maximum Peak Sink Current
  • Integrated Current Sense Amplifier with low input offset (optimized for 1 shunt)
    • Adjustable Gain (5, 10, 20, 40 V/V)
  • Hardware interface provides simple configuration
  • Ultra-low power sleep mode <1 uA at 25 ̊C
  • 4-ns (typ) propagation delay matching between phases
  • Independent driver shutdown path (DRVOFF)
  • 65-V tolerant wake pin (nSLEEP)
  • Supports negative transients upto -10V on SHx
  • 6x and 3x PWM Modes
  • Supports 3.3-V, and 5-V Logic Inputs
  • Accurate LDO (AVDD), 3.3 V ±3%, 80 mA
  • Compact QFN Packages and Footprints
  • Adjustable VDS overcurrent threshold through VDSLVL pin
  • Adjustable deadtime through DT pin
  • Efficient System Design With Power Blocks
  • Integrated Protection Features
    • PVDD Undervoltage Lockout (PVDDUV)
    • GVDD Undervoltage (GVDDUV)
    • Bootstrap Undervoltage (BST_UV)
    • Overcurrent Protection (VDS_OCP, SEN_OCP)
    • Thermal Shutdown (OTSD)
    • Fault Condition Indicator (nFAULT)

The DRV8329 family of devices is an integrated gate driver for three-phase applications. The devices provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates the correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support 100% duty cycle. The Gate Drive architecture supports peak gate drive currents up to 1-A source and 2-A sink. The DRV8329 can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

The 6x and 3x PWM modes allow for simple interfacing to controller circuits. The device has integrated accurate 3.3-V LDO that can be used to power external controller and can be used as reference for CSA. The configuration settings for the device are configurable through hardware (H/W) pins.

The DRV8329 devices integrate low-side current sense amplifier that allow current sensing for sum of current from all three phases of the drive stage.

A low-power sleep mode is provided to achieve low quiescent current by shutting down most of the internal circuitry. Internal protection functions are provided for undervoltage lockout, GVDD fault, MOSFET overcurrent, MOSFET short circuit, and overtemperature. Fault conditions are indicated on nFAULT pin.

The DRV8329 family of devices is an integrated gate driver for three-phase applications. The devices provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates the correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support 100% duty cycle. The Gate Drive architecture supports peak gate drive currents up to 1-A source and 2-A sink. The DRV8329 can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

The 6x and 3x PWM modes allow for simple interfacing to controller circuits. The device has integrated accurate 3.3-V LDO that can be used to power external controller and can be used as reference for CSA. The configuration settings for the device are configurable through hardware (H/W) pins.

The DRV8329 devices integrate low-side current sense amplifier that allow current sensing for sum of current from all three phases of the drive stage.

A low-power sleep mode is provided to achieve low quiescent current by shutting down most of the internal circuitry. Internal protection functions are provided for undervoltage lockout, GVDD fault, MOSFET overcurrent, MOSFET short circuit, and overtemperature. Fault conditions are indicated on nFAULT pin.
filter Buscar otro/a Controladores BLDC
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
DRV8300 ACTIVO Controlador de puerta trifásico de 100 V máx. con diodos bootstrap PVDD supply higher 5-100 V
DRV8320 ACTIVO Controlador de puerta inteligente trifásico de 65 V máx. PVDD supply 6-60 V
DRV8323 ACTIVO Controlador de puerta trifásico inteligente de 65 V máx. con amplificadores de derivación de corr PVDD supply 6-60 V with current sense amplifiers
DRV8328 ACTIVO Controlador de puerta trifásico de 60 V y 1000/2000 mA DRV8328 has no current sense amplifier for customer who is looking for external current sense implementations

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 4
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet DRV8329 4.5 to 60 V Three-phase BLDC Gate Driver datasheet (Rev. B) PDF | HTML 16 dic 2024
Technical article Selecting the right level of integration to meet motor design requirements PDF | HTML 04 ene 2024
Application note Power Delivery in Cordless Power Tools Using DRV8329 PDF | HTML 15 sep 2022
Certificate DRV8329AEVM EU RoHS Declaration of Conformity (DoC) 22 mar 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

DRV8329AEVM — Módulo de evaluación DRV8329A de controlador de compuerta BLDC trifásico

El DRV8329AEVM es una etapa de accionamiento de CC sin escobillas de 30 A trifásica basada en el controlador de puerta DRV8329A para motores de corriente continua sin escobillas (BLDC). El DRV8329 incorpora tres diodos para el funcionamiento del arranque sin la necesidad de diodos externos. El (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Primeros pasos

MSP-MOTOR-CONTROL — MSP firmware solutions for motor control

MSP Motor Control is a collection of software, tools and examples to spin motors in 30 minutes or less with MSPM0 Arm® Cortex® M0+ MCUs and popular motor driver solutions.

MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and three-phase motors with sensored (...)

Productos y hardware compatibles

Productos y hardware compatibles
Empiece Opciones de descarga
Herramienta de cálculo

BLDC-MAX-QG-MOSFET-CALCULATOR — Calculate the maximum QG MOSFET for your motor driver

Calculate the maximum QG MOSFET that can be driven based on the PWM switching frequency, algorithm type, and additional external capacitance.
Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Herramienta de cálculo

SLVRBM5 — BLDC Gate Resistor Calculator

Productos y hardware compatibles

Productos y hardware compatibles
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (REE) 36 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos