Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC
Inicio
Administración de potencia
Reguladores conmutados CC/CC
Convertidores de CC/CC

LM22677-Q1

ACTIVO

Regulador de tensión reductor de 5 A SIMPLE SWITCHER con sincronización o frecuencia de conmutación

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LM63460-Q1 ACTIVO Convertidor reductor síncrono de 3 V a 36 V, 6 A y bajo EMI de calidad automotriz en un encapsulado Smaller device footprint, enhanced HotRod™ QFN package, spread spectrum and selectable FPWM or PFM modes.

LM22677-Q1

ACTIVO
Haga su pedido ahora

Detalles del producto

Rating Automotive Topology Buck Iout (max) (A) 5 Vin (max) (V) 42 Vin (min) (V) 4.5 Vout (max) (V) 37 Vout (min) (V) 1.285 Features Enable, Frequency synchronization, Over Current Protection, Soft Start Fixed Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0034 Duty cycle (max) (%) 90
Rating Automotive Topology Buck Iout (max) (A) 5 Vin (max) (V) 42 Vin (min) (V) 4.5 Vout (max) (V) 37 Vout (min) (V) 1.285 Features Enable, Frequency synchronization, Over Current Protection, Soft Start Fixed Control mode Voltage mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0034 Duty cycle (max) (%) 90
TO-263 (NDR) 7 142.3416 mm² (10.16 mm × 14.01 mm)
  • Wide Input Voltage Range: 4.5 V to 42 V
  • Internally Compensated Voltage Mode Control
  • Stable With Low ESR Ceramic Capacitors
  • 100-mΩ N-Channel MOSFET
  • Output Voltage Options:
    • -ADJ (Outputs as Low as 1.285 V)
    • -5.0 (Output Fixed to 5 V)
  • ±1.5% Feedback Reference Accuracy
  • 500-kHz Default Switching Frequency
  • Adjustable Switching Frequency and
    Synchronization
  • –40°C to +125°C Operating Junction Temperature
    Range
  • Precision Enable Input
  • Integrated Boot-Strap Diode
  • Integrated Soft-Start
  • Fully WEBENCH® Enabled
  • LM22677-Q1 is an Automotive-Grade Product
    that is AEC-Q100 Grade 1 Qualified (–40°C to
    +125°C Operating Junction Temperature)
  • NDR (Exposed Pad)
  • Wide Input Voltage Range: 4.5 V to 42 V
  • Internally Compensated Voltage Mode Control
  • Stable With Low ESR Ceramic Capacitors
  • 100-mΩ N-Channel MOSFET
  • Output Voltage Options:
    • -ADJ (Outputs as Low as 1.285 V)
    • -5.0 (Output Fixed to 5 V)
  • ±1.5% Feedback Reference Accuracy
  • 500-kHz Default Switching Frequency
  • Adjustable Switching Frequency and
    Synchronization
  • –40°C to +125°C Operating Junction Temperature
    Range
  • Precision Enable Input
  • Integrated Boot-Strap Diode
  • Integrated Soft-Start
  • Fully WEBENCH® Enabled
  • LM22677-Q1 is an Automotive-Grade Product
    that is AEC-Q100 Grade 1 Qualified (–40°C to
    +125°C Operating Junction Temperature)
  • NDR (Exposed Pad)

The LM22677 switching regulator provides all of the functions necessary to implement an efficient high-voltage step-down (buck) regulator using a minimum of external components. This easy-to-use regulator incorporates a 42-V N-channel MOSFET switch that can provide up to 5 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5-V output and adjustable output voltage options are available. The default switching frequency is set at 500 kHz, thus allowing for small external components and good transient response. In addition, the frequency can be adjusted over a range of 200 kHz to 1 MHz with a single external resistor. The internal oscillator can be synchronized to a system clock or to the oscillator of another regulator. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typical). The LM22677 also has built-in thermal shutdown, and current limiting to protect against accidental overloads.

The LM22677 device is a member of Texas Instruments’ SIMPLE SWITCHER family. The SIMPLE SWITCHER® concept provides for an easy-to-use complete design using a minimum number of external components and the TI WEBENCH design tool. TI's WEBENCH tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.

The LM22677 switching regulator provides all of the functions necessary to implement an efficient high-voltage step-down (buck) regulator using a minimum of external components. This easy-to-use regulator incorporates a 42-V N-channel MOSFET switch that can provide up to 5 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5-V output and adjustable output voltage options are available. The default switching frequency is set at 500 kHz, thus allowing for small external components and good transient response. In addition, the frequency can be adjusted over a range of 200 kHz to 1 MHz with a single external resistor. The internal oscillator can be synchronized to a system clock or to the oscillator of another regulator. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typical). The LM22677 also has built-in thermal shutdown, and current limiting to protect against accidental overloads.

The LM22677 device is a member of Texas Instruments’ SIMPLE SWITCHER family. The SIMPLE SWITCHER® concept provides for an easy-to-use complete design using a minimum number of external components and the TI WEBENCH design tool. TI's WEBENCH tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.
filter Buscar otro/a Convertidores de CC/CC
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LMR33630-Q1 ACTIVO Convertidor de voltaje reductor síncrono de 3,8 V a 36 V, 3 A Smaller footprint and improved EMI performance.
LM61460-Q1 ACTIVO Convertidor reductor síncrono de 3 V a 36 V, 6 A y bajo ruido para automoción Smaller solution size, higher efficiency at light load, lower EMI with HotRod™ QFN packaging and spread spectrum.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 17
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos LM22677/-Q1 42-V, 5-A SIMPLE SWITCHER, Step-Down Voltage Regulator With Features datasheet (Rev. O) PDF | HTML 11/08/2015
Nota sobre la aplicación Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 25/03/2024
Nota sobre la aplicación Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 12/09/2014
Nota sobre la aplicación AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A) 6/05/2013
Nota sobre la aplicación AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 24/04/2013
Nota sobre la aplicación AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 23/04/2013
Nota sobre la aplicación AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 23/04/2013
Nota sobre la aplicación AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 23/04/2013
Nota sobre la aplicación AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 23/04/2013
Nota sobre la aplicación AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 23/04/2013
Nota sobre la aplicación AN-1197 Selecting Inductors for Buck Converters (Rev. B) 23/04/2013
Nota sobre la aplicación AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 23/04/2013
Nota sobre la aplicación AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 23/04/2013
Guía de diseño SIMPLE SWITCHER® Design Guide 11/04/2011
Nota sobre la aplicación Input and Output Capacitor Selection 19/09/2005
Más documentación SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 12/07/2005
Nota sobre la aplicación AN-643 EMI/RFI Board Design (Rev. B) 3/05/2004

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM22677EVAL — Regulador SIMPLE SWITCHER de 5 A con EVM de ajuste de frecuencia o sincronización y habilitación de

The LM22677 evaluation board is designed to demonstrate the capabilities of the LM22677 switching regulator. The LM22677 evaluation board schematic shown in Figure 1 is configured to provide an output voltage of 3.3V up to 5A load current with an input voltage range of 4.5V to 42V. Due to the low (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

LM22677-Q1-ADJ PSpice Transient Model

SNVM335.ZIP (129 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

LM22677-Q1-ADJ Unencrypted PSpice Transient Model

SNVM824.ZIP (4 KB) - Modelo PSpice
Productos y hardware compatibles
Herramienta de cálculo

LM2267X-22680DESIGN-CALC — Calculadora de componentes de conmutador simple con inicio rápido LM2267x, LM22680

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TO-263 (NDR) 7 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos