Inicio Administración de potencia Controladores LED Controladores para LED de retroiluminación

LM36274

ACTIVO

Controlador de retroiluminación integrada con polarización de LCD

Detalles del producto

Number of channels 4 Vin (min) (V) 2.7 Vin (max) (V) 5 Vout (min) (V) 27 Vout (max) (V) 30 Type Inductive Switching frequency (max) (kHz) 1050 Duty cycle (max) (%) 92 LED current per channel (mA) 30 Peak efficiency (%) 92 Topology Boost, Current Sink Features Adjustable Switch Frequency, CABC, I2C control, OVP, Thermal shutdown Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 4 Vin (min) (V) 2.7 Vin (max) (V) 5 Vout (min) (V) 27 Vout (max) (V) 30 Type Inductive Switching frequency (max) (kHz) 1050 Duty cycle (max) (%) 92 LED current per channel (mA) 30 Peak efficiency (%) 92 Topology Boost, Current Sink Features Adjustable Switch Frequency, CABC, I2C control, OVP, Thermal shutdown Operating temperature range (°C) -40 to 85 Rating Catalog
DSBGA (YFF) 24 4.67999999999999928 mm² (— mm × — mm)
  • Drives up to Four Parallel White LED Strings
    (29-V Maximum VOUT)
  • 11-Bit Exponential and Linear Dimming Control
  • PWM and I2C Brightness Control
  • Backlight Operation With 4.7-µH to 15-µH Inductor
  • Backlight and LCD Bias Efficiency up to 92%
  • Programmable LCD Bias Voltages (±4 V to ±6.5 V With 50-mV resolution) With Up to 80-mA per Output
  • 0.2% Matched LED Current From 60 µA to 30 mA
  • 1% Accurate LED Current From 60 µA to 30 mA
  • 2.7-V to 5-V Input Voltage Range
  • Drives up to Four Parallel White LED Strings
    (29-V Maximum VOUT)
  • 11-Bit Exponential and Linear Dimming Control
  • PWM and I2C Brightness Control
  • Backlight Operation With 4.7-µH to 15-µH Inductor
  • Backlight and LCD Bias Efficiency up to 92%
  • Programmable LCD Bias Voltages (±4 V to ±6.5 V With 50-mV resolution) With Up to 80-mA per Output
  • 0.2% Matched LED Current From 60 µA to 30 mA
  • 1% Accurate LED Current From 60 µA to 30 mA
  • 2.7-V to 5-V Input Voltage Range

The LM36274 is an integrated four-channel WLED driver and LCD bias supply. The ultra-compact size, high efficiency, high level of integration, and programmability allow the LM36274 to address a variety of applications without the need for hardware changes while minimizing the overall solution area.

The backlight boost provides the power to bias four parallel LED strings with up to 29-V total output voltage. The 11-bit LED current is programmable via the I2C bus and/or controlled via a logic level PWM input from 60 µA to 30 mA. Each LED string can be independently enabled or disabled to provide zone dimming capabilities. The backlight boost can be operated efficiently with an inductance range from 4.7 µH to 15 µH, allowing for efficiency and solution size optimization.

The LCD bias boost provides the power to both a positive LDO and an inverting charge pump. Both positive and negative bias supplies have programmable output voltages of ±4 V to ±6.5 V with 50-mV steps and up to ±80 mA of current capability. An auto-sequencing feature provides a programmed delay from positive to negative bias activation, with additional programmable voltage slew rate control. Two wake-up modes allow both bias outputs to be controlled with a single external signal and stay active while consuming very low quiescent current.

The LM36274 is an integrated four-channel WLED driver and LCD bias supply. The ultra-compact size, high efficiency, high level of integration, and programmability allow the LM36274 to address a variety of applications without the need for hardware changes while minimizing the overall solution area.

The backlight boost provides the power to bias four parallel LED strings with up to 29-V total output voltage. The 11-bit LED current is programmable via the I2C bus and/or controlled via a logic level PWM input from 60 µA to 30 mA. Each LED string can be independently enabled or disabled to provide zone dimming capabilities. The backlight boost can be operated efficiently with an inductance range from 4.7 µH to 15 µH, allowing for efficiency and solution size optimization.

The LCD bias boost provides the power to both a positive LDO and an inverting charge pump. Both positive and negative bias supplies have programmable output voltages of ±4 V to ±6.5 V with 50-mV steps and up to ±80 mA of current capability. An auto-sequencing feature provides a programmed delay from positive to negative bias activation, with additional programmable voltage slew rate control. Two wake-up modes allow both bias outputs to be controlled with a single external signal and stay active while consuming very low quiescent current.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LM36273 ACTIVO Retroiluminación LCD de tres canales y potencia de polarización LM3627x are hardware and software compatible

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 8
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos Four-Channel LCD Backlight Driver With Integrated Bias Power datasheet (Rev. D) PDF | HTML 2/03/2018
Informe Common LED Functions and LED Driver Design Considerations 21/09/2020
Nota sobre la aplicación How to Use LM3627x to Design DPU in Smartphones 7/05/2020
Nota sobre la aplicación LM3627x Layout Guidelines 12/10/2017
Nota sobre la aplicación Analog PWM Dimming in White-LED Drivers 21/12/2016
Nota sobre la aplicación Inductor Selection in Boost Converters for LCD Backlight Applications 24/10/2016
Nota sobre la aplicación Auto-Frequency Mode Setting for Improved Boost Efficiency in White LED Backlight 14/10/2016
Nota sobre la aplicación Schottky Diode Selection in Asynchronous Boost Converters 6/09/2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM36274EVM — Módulo de evaluación de inversor con bomba de carga regulado (LM36274)

El LM36274EVM ayuda en la evaluación del controlador LED integrado LM36274 y la fuente de alimentación de polarización LCD. El boost de retroiluminación proporciona la potencia necesaria para polarizar cuatro cadenas de LED paralelas con una tensión de salida total de hasta 29 V y hasta 30 (...)
Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
GUI para el módulo de evaluación (EVM)

SNVC194 — LM36274EVM GUI 1.0.0

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YFF) 24 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos