LM5066

ACTIVO

Controlador de intercambio en caliente de 10 V a 80 V con monitorización de corriente, tensión y pot

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat LM5066 10 to 80 V, Hotswap Controller With I/V/P Monitoring and PMBus Interface datasheet (Rev. I) (Inglés) PDF | HTML

LM5066

ACTIVO

Haga su pedido ahora

Detalles del producto

Vabsmax_cont (V)

100

Vin (max) (V)

80

Vin (min) (V)

10

Current limit (min) (A)

0.01

Features

Adjustable OVLO, Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, PMBus, Power good signal, Short circuit protection, Thermal shutdown, adjustable UVLO

Overcurrent response

Circuit breaker, Current limiting

Fault response

Auto-retry, Latch-off

Overvoltage response

Cut-off

Rating

Catalog

Soft start

Adjustable

Quiescent current (Iq) (typ) (A)

0.0072

Quiescent current (Iq) (max) (A)

0.0095

Device type

eFuses and hot swap controllers

Operating temperature range (°C)

-40 to 125

Vabsmax_cont (V)

100

Vin (max) (V)

80

Vin (min) (V)

10

Current limit (min) (A)

0.01

Features

Adjustable OVLO, Adjustable current limit, Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, PMBus, Power good signal, Short circuit protection, Thermal shutdown, adjustable UVLO

Overcurrent response

Circuit breaker, Current limiting

Fault response

Auto-retry, Latch-off

Overvoltage response

Cut-off

Rating

Catalog

Soft start

Adjustable

Quiescent current (Iq) (typ) (A)

0.0072

Quiescent current (Iq) (max) (A)

0.0095

Device type

eFuses and hot swap controllers

Operating temperature range (°C)

-40 to 125

HTSSOP (PWP)

28

62.08 mm² (9.7 mm × 6.4 mm)

10- to 80-V Operation
100-V Continuous Absolute Max
26 mV (±12%) or 50 mV (±6%) ILIM Threshold
Programmable FET SOA Protection
Programable UV, OV, t_FAULT Thresholds
External FET Temperature Sensing
Failed FET Detection
I²C / SMBus Interface
PMBus™ Compliant Command Structure
Precision V IN, VOUT, IIN, PIN, VAUX Monitoring
- V (±2.7%); I (±3%); P (±4.5%)
Programable I/V/P Averaging Interval
12-bit ADC with 1-kHz Sampling Rate
–40°C < TJ < 125°C Operation
Pin-to-Pin Compatible with LM5066I

10- to 80-V Operation
100-V Continuous Absolute Max
26 mV (±12%) or 50 mV (±6%) ILIM Threshold
Programmable FET SOA Protection
Programable UV, OV, t_FAULT Thresholds
External FET Temperature Sensing
Failed FET Detection
I²C / SMBus Interface
PMBus™ Compliant Command Structure
Precision V IN, VOUT, IIN, PIN, VAUX Monitoring
- V (±2.7%); I (±3%); P (±4.5%)
Programable I/V/P Averaging Interval
12-bit ADC with 1-kHz Sampling Rate
–40°C < TJ < 125°C Operation
Pin-to-Pin Compatible with LM5066I

LM5066 provides robust protection and precision monitoring for 10- to 80-V systems. Programmable UV, OV, I_LIMIT, and fast-short circuit protection allow for customized protection for any application. Programmable FET SOA protection sets the maximum power the FET is allowed to dissipate under any condition. The programmable fault timer (t_FAULT) is set to avoid nuisance trips, ensure start-up, and limit the duration of over load events.

In addition to circuit protection, the LM5066 supplies real-time power, voltage, current, temperature, and fault data to the system management host through the I²C / SMBus interface. PMBus compliant command structure makes it easy to program the device. Precision telemetry enables intelligent power management functions such as efficiency optimization and early fault detection. LM5066 also supports advanced features such as I/V/P averaging and peak power measurment to improve system diagnostics.

LM5066I is pin-to-pin compatible with the LM5066 and offers improved telemetry accuracy and supports the Read_Ein command to monitor energy.

LM5066 provides robust protection and precision monitoring for 10- to 80-V systems. Programmable UV, OV, I_LIMIT, and fast-short circuit protection allow for customized protection for any application. Programmable FET SOA protection sets the maximum power the FET is allowed to dissipate under any condition. The programmable fault timer (t_FAULT) is set to avoid nuisance trips, ensure start-up, and limit the duration of over load events.

In addition to circuit protection, the LM5066 supplies real-time power, voltage, current, temperature, and fault data to the system management host through the I²C / SMBus interface. PMBus compliant command structure makes it easy to program the device. Precision telemetry enables intelligent power management functions such as efficiency optimization and early fault detection. LM5066 also supports advanced features such as I/V/P averaging and peak power measurment to improve system diagnostics.

LM5066I is pin-to-pin compatible with the LM5066 and offers improved telemetry accuracy and supports the Read_Ein command to monitor energy.

filter

Buscar otro/a Controladores de intercambio en caliente

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

LM25066

ACTIVO

Controlador de intercambio en caliente de 2.9 V a 17 V con PMBus This product is the 12-V version of this device.

LM5066I

ACTIVO

Controlador de intercambio en caliente de 10 V a 80 V con precisión de monitorización de corriente, This product is a node ,anager compliant, and has higher measurement accuracy.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 8

Documentación principal	Tipo	Título	Opciones de formato
*	Hoja de datos	LM5066 10 to 80 V, Hotswap Controller With I/V/P Monitoring and PMBus Interface datasheet (Rev. I)	PDF \| HTML	26/01/2016
	Nota sobre la aplicación	Implementation of PSYS Monitor Using TPS25984, TPS25985, or TPS25990 eFuses	PDF \| HTML	15/11/2023
	Libro electrónico	11 Ways to Protect Your Power Path		3/07/2019
	Nota sobre la aplicación	Basics of Power Switches (Rev. A)	PDF \| HTML	26/04/2019
	Guía de selección	Power Management Guide 2018 (Rev. R)		25/06/2018
	Artículo técnico	Simplify digital hot swap design using the PI-Commander GUI	PDF \| HTML	6/06/2016
	Nota sobre la aplicación	Handling System Transients in Hot Swap Applications		8/05/2015
	Nota sobre la aplicación	Robust Hot Swap Design (Rev. A)		8/04/2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM5066EVK — Kit de evaluación LM5066

The LM5066EVK evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM5066 hot-swap controller with PMBUS compliant SMBUS/I2C interface to accurately measure, protect and control the electrical operating conditions of systems connected to a backplane power bus. The EVM (...)

Guía del usuario: PDF

Productos y hardware compatibles

En inventario

Límite:

Inicie sesión para hacer un pedido

lock

Iniciar sesión para ver el inventario

??asset.out-of-stock-ti_es_MX??

No disponible

GUI para el módulo de evaluación (EVM)