Inicio Administración de potencia Circuitos integrados multicanal (PMIC)
Inicio
Administración de potencia
Circuitos integrados multicanal (PMIC)

LP3918

NO RECOMENDADO PARA NUEVOS DISEÑOS

Unidad de gestión de la carga de la batería y del regulador

Haga su pedido ahora
Hoja de datos
LP3918 no se recomienda para nuevos diseños
Este producto sigue estando disponible para los clientes existentes. Los nuevos diseños deben considerar un producto alternativo.
open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
LP3921 ACTIVO Unidad de gestión y regulación del cargador de la batería con amplificador de audio Boomer integrado PMIC for CDMA phone handsets and other personal electronic applications with fully integrated charger and fully differential audio power amplifier.

LP3918

NO RECOMENDADO PARA NUEVOS DISEÑOS
Hoja de datos Haga su pedido ahora

Detalles del producto

Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 1.5 Vout (max) (V) 3.3 Iout (max) (A) 0.3 Features Comm control Rating Catalog Operating temperature range (°C) -40 to 125
Vin (min) (V) 3 Vin (max) (V) 5.5 Vout (min) (V) 1.5 Vout (max) (V) 3.3 Iout (max) (A) 0.3 Features Comm control Rating Catalog Operating temperature range (°C) -40 to 125
DSBGA (YZR) 25 7.5625 mm² 2.75 x 2.75
  • Fully Integrated Li-Ion Battery Charger with Thermal Regulation
  • USB Charge Mode
  • 7 Low Noise LDO’s
    • 2 x 300 mA
    • 3 x 150 mA
    • 2 x 80 mA
  • I2C Compatible Interface for Controlling LDO Outputs and Charger Operation
  • Thermal Shutdown
  • Under Voltage Lockout
  • 25-Bump Thin DSBGA Package 2.5 x 2.5 mm
  • Options Available on Request, Please Contact Sales Office for Further Information;
    • Level Detect on HF_PWR & PWR_ON
    • LDO Charging Mode
    • Custom Default Settings on Charger, and LDO O/P's.

Key Specifications

  • 50mA to 950mA Programmable Charge Current
  • 3.0V to 5.5V Input Voltage Range
  • 200mV Typ. Dropout Voltage on 300 mA LDO’s
  • 2% (Typ) Output Voltage Accuracy on LDO’s

All trademarks are the property of their respective owners.

  • Fully Integrated Li-Ion Battery Charger with Thermal Regulation
  • USB Charge Mode
  • 7 Low Noise LDO’s
    • 2 x 300 mA
    • 3 x 150 mA
    • 2 x 80 mA
  • I2C Compatible Interface for Controlling LDO Outputs and Charger Operation
  • Thermal Shutdown
  • Under Voltage Lockout
  • 25-Bump Thin DSBGA Package 2.5 x 2.5 mm
  • Options Available on Request, Please Contact Sales Office for Further Information;
    • Level Detect on HF_PWR & PWR_ON
    • LDO Charging Mode
    • Custom Default Settings on Charger, and LDO O/P's.

Key Specifications

  • 50mA to 950mA Programmable Charge Current
  • 3.0V to 5.5V Input Voltage Range
  • 200mV Typ. Dropout Voltage on 300 mA LDO’s
  • 2% (Typ) Output Voltage Accuracy on LDO’s

All trademarks are the property of their respective owners.

The LP3918 is a fully integrated charger and multi-regulator unit designed for CDMA cellular phones. The LP3918 contains a Li-Ion battery charger, 7 low noise low dropout (LDO) voltage regulators and a high-speed serial interface to program on/off conditions and output voltages of individual regulators, and also to read status information from the PMU.

The Li-Ion charger integrates a power FET, reverse current blocking diode, sense resistor with current monitor output, and requires only a few external components. Charging is thermally regulated to obtain the most efficient charging rate for a given ambient temperature.

LDO regulators provide high PSRR and low noise ideally suited for supplying power to both analog and digital loads.

The LP3918 is a fully integrated charger and multi-regulator unit designed for CDMA cellular phones. The LP3918 contains a Li-Ion battery charger, 7 low noise low dropout (LDO) voltage regulators and a high-speed serial interface to program on/off conditions and output voltages of individual regulators, and also to read status information from the PMU.

The Li-Ion charger integrates a power FET, reverse current blocking diode, sense resistor with current monitor output, and requires only a few external components. Charging is thermally regulated to obtain the most efficient charging rate for a given ambient temperature.

LDO regulators provide high PSRR and low noise ideally suited for supplying power to both analog and digital loads.
filter Buscar otro/a Circuitos integrados multicanal (PMIC)
Descargar

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet LP3918 Battery Charge Management and Regulator Unit datasheet (Rev. D) 03 may 2013

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje