Inicio Gestión de la energía Circuitos integrados multicanal (PMIC)

LP8758-EA

ACTIVO

Convertidor reductor CC-CC monofásico de 4 salidas de 4 A

Detalles del producto

Processor supplier Generic Processor name Generic Regulated outputs (#) 4 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 0 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Vout (min) (V) 0.5 Vout (max) (V) 3.36 Iout (max) (A) 4 Configurability Factory programmable, Software configurable Features Adjustable current limit, Dynamic voltage scaling, Enable, I2C, Light-load efficiency, Multiple outputs, Output discharge, Phase interleaving, Power good, Remote sense, Synchronous rectification Rating Catalog Operating temperature range (°C) -40 to 105 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.006 Switching frequency (max) (kHz) 3000 Shutdown current (ISD) (typ) (µA) 1 Switching frequency (typ) (kHz) 3000 Product type Processor and FPGA
Processor supplier Generic Processor name Generic Regulated outputs (#) 4 Step-down DC/DC converter 4 Step-up DC/DC converter 0 LDO 0 Vin (min) (V) 2.5 Vin (max) (V) 5.5 Vout (min) (V) 0.5 Vout (max) (V) 3.36 Iout (max) (A) 4 Configurability Factory programmable, Software configurable Features Adjustable current limit, Dynamic voltage scaling, Enable, I2C, Light-load efficiency, Multiple outputs, Output discharge, Phase interleaving, Power good, Remote sense, Synchronous rectification Rating Catalog Operating temperature range (°C) -40 to 105 Step-down DC/DC controller 0 Step-up DC/DC controller 0 Iq (typ) (mA) 0.006 Switching frequency (max) (kHz) 3000 Shutdown current (ISD) (typ) (µA) 1 Switching frequency (typ) (kHz) 3000 Product type Processor and FPGA
DSBGA (YFF) 35 6.6 mm² 2.2 x 3
  • Fully integrated quad buck, up to 4-A programmable maximum output current per buck
    • Auto PWM-PFM and forced-PWM operations
    • Programmable output voltage slew rate from 30 mV/µs to 0.5 mV/µs
    • Input voltage range: 2.5 V to 5.5 V
    • VOUT range: 0.5 V to 3.36 V with DVS
  • Programmable start-up and shutdown sequencing with enable signal
  • I2C-compatible interface that supports standard (100 kHz), fast (400 kHz), fast+ (1 MHz), and high-speed (3.4 MHz) modes
  • Interrupt function with programmable masking
  • Load current measurement
  • Output short-circuit and overload protection
  • Spread-spectrum mode for EMI reduction
  • The four buck cores operate 90° out of phase thereby reducing input ripple current
  • Overtemperature warning and protection
  • Undervoltage Lockout (UVLO)
  • Fully integrated quad buck, up to 4-A programmable maximum output current per buck
    • Auto PWM-PFM and forced-PWM operations
    • Programmable output voltage slew rate from 30 mV/µs to 0.5 mV/µs
    • Input voltage range: 2.5 V to 5.5 V
    • VOUT range: 0.5 V to 3.36 V with DVS
  • Programmable start-up and shutdown sequencing with enable signal
  • I2C-compatible interface that supports standard (100 kHz), fast (400 kHz), fast+ (1 MHz), and high-speed (3.4 MHz) modes
  • Interrupt function with programmable masking
  • Load current measurement
  • Output short-circuit and overload protection
  • Spread-spectrum mode for EMI reduction
  • The four buck cores operate 90° out of phase thereby reducing input ripple current
  • Overtemperature warning and protection
  • Undervoltage Lockout (UVLO)

The LP8758-EA device is designed to meet power management requirements for low-power processors in mobile phones, network cards, and similar applications. The device contains four step-down DC-DC converter cores, providing four output voltage rails. The device is controlled by an I2C-compatible serial interface.

The automatic PWM-PFM (AUTO mode) operation maximizes efficiency over a wide output-current range.

The LP8758-EA supports programmable start-up and shutdown sequencing synchronized to hardware Enable input signal.

The protection features include short-circuit protection, current limits, input supply UVLO, and temperature warning and shutdown functions. Several error flags are provided for status information of the device. In addition, the LP8758-EA device supports load current measurement without the addition of external current sense resistors. During start-up and voltage change, the device controls the output slew rate to minimize output voltage overshoot and the inrush current.

The LP8758-EA device is designed to meet power management requirements for low-power processors in mobile phones, network cards, and similar applications. The device contains four step-down DC-DC converter cores, providing four output voltage rails. The device is controlled by an I2C-compatible serial interface.

The automatic PWM-PFM (AUTO mode) operation maximizes efficiency over a wide output-current range.

The LP8758-EA supports programmable start-up and shutdown sequencing synchronized to hardware Enable input signal.

The protection features include short-circuit protection, current limits, input supply UVLO, and temperature warning and shutdown functions. Several error flags are provided for status information of the device. In addition, the LP8758-EA device supports load current measurement without the addition of external current sense resistors. During start-up and voltage change, the device controls the output slew rate to minimize output voltage overshoot and the inrush current.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS659128 ACTIVO PMU para alimentación de procesador Similar functionality but pre-programmed to power the same application processor

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet LP8758-EA Four 4-A Output Synchronous Step-Down DCDC Converters datasheet PDF | HTML 30 abr 2021
User guide LP8758 Quick Sample Module User Guide PDF | HTML 25 ago 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LP8758-E0EVM — Módulo de evaluación del regulador CC-CC reductor LP8758-E0 de cuatro salidas

The LP8758-E0EVM customer evaluation module demonstrates the LP8758-E0 device from Texas Instruments. The LP8758-E0 is designed to meet the power management requirements for low-power processors in mobile phones, network cards, and similar applications. The device contains four step-down DC-DC (...)

Guía del usuario: PDF
GUI para el módulo de evaluación (EVM)

SNVC189 LP8758-xxEVM GUI

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Circuitos integrados multicanal (PMIC)
LP8758-B0 Convertidor CC-CC monofásico reductor de 16 A de salida LP8758-E0 Convertidor reductor CC-CC monofásico de 4 salidas de 4 A LP8758-E3 Convertidor reductor CC-CC monofásico de 4 salidas de 4 A LP8758-EA Convertidor reductor CC-CC monofásico de 4 salidas de 4 A
Desarrollo de hardware
Placa de evaluación
LP8758-E0EVM Módulo de evaluación del regulador CC-CC reductor LP8758-E0 de cuatro salidas LP8758EVM Módulo de evaluación LP8758-B0 del convertidor reductor CC-CC cuatrifásico
Soporte de software

SNVC186 LP8758EVM Qt Source

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Circuitos integrados multicanal (PMIC)
LP8758-B0 Convertidor CC-CC monofásico reductor de 16 A de salida LP8758-E0 Convertidor reductor CC-CC monofásico de 4 salidas de 4 A LP8758-E3 Convertidor reductor CC-CC monofásico de 4 salidas de 4 A LP8758-EA Convertidor reductor CC-CC monofásico de 4 salidas de 4 A
Desarrollo de hardware
Placa de evaluación
LM26480SQ-AAEV Módulo de evaluación LM26480SQ-AA: IC de gestión de energía integrada configurable (PMIC) con 2 CC/C LP8758EVM Módulo de evaluación LP8758-B0 del convertidor reductor CC-CC cuatrifásico
Herramienta de cálculo

PEET-GUI — Herramienta de estimación de la eficiencia de los PMIC (PEET)

The PMIC Efficiency Estimator Tool (PEET GUI) is a graphical user interface used to easily evaluate PMIC DC/DC regulator efficiency relative to your design conditions. The PEET GUI can be used to configure each DC/DC regulator separately and provides real-time efficiency and power dissipation data (...)
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YFF) 35 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos