Inicio Administración de potencia Módulos de energía CC/CC Módulos de potencia (inductor integrado)
Inicio
Administración de potencia
Módulos de energía CC/CC
Módulos de potencia (inductor integrado)

PTH03000W

ACTIVO

Módulo de alimentación complementario ajustable de 6 A con salida amplia y entrada de 3.3 V

Haga su pedido ahora
Hoja de datos

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPSM82866A ACTIVO Módulo de potencia reductor de 6 A y entrada de 2.4 V a 5.5 V con inductor integrado Newer solution with smaller BOM size, higher efficiency, higher voltage accuracy
Funcionalidad similar a la del dispositivo comparado
TPSM8287A06 ACTIVO Módulo reductor CC-CC de 6 V de entrada y 6 A en paralelo con I2C, sincronización de frecuencia y de Newer version with lower quiescent current, smaller BOM count and size
TPSM82816 ACTIVO Módulo reductor de 6 A y 6 V con sincronización de frecuencia opcional, arranque suave ajustable y s Smaller total BOM size of 60 mm², frequency synchronous option and you can use small ceramic capacitors.

PTH03000W

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 3.6 Vin (min) (V) 3 Vout (max) (V) 2.5 Vout (min) (V) 0.9 Features Enable, Tracking Operating temperature range (°C) -40 to 85 Type Module Duty cycle (max) (%) 100 Control mode Voltage mode
Rating Catalog Topology Buck Iout (max) (A) 6 Vin (max) (V) 3.6 Vin (min) (V) 3 Vout (max) (V) 2.5 Vout (min) (V) 0.9 Features Enable, Tracking Operating temperature range (°C) -40 to 85 Type Module Duty cycle (max) (%) 100 Control mode Voltage mode
DIPMODULE (EUT) 5 270.9846 mm² (19.94 mm × 13.59 mm) DIPMODULE (EUS) 5 270.9846 mm² (19.94 mm × 13.59 mm)
  • Up to 6-A Output Current
  • 3.3 V Input Voltage
  • Wide-Output Voltage Adjust (0.9 V to 2.5 V)
  • Efficiencies up to 95%
  • 115 W/in³ Power Density
  • On/Off Inhibit
  • Under-Voltage Lockout
  • Output Current Limit
  • Over-Temperature Protection
  • Operating Temp: –40 to +85°C
  • Surface Mount Package
  • Safety Agency Approvals (Pending): UL 1950, CSA 22.2 950, EN60950 & VDE
  • Up to 6-A Output Current
  • 3.3 V Input Voltage
  • Wide-Output Voltage Adjust (0.9 V to 2.5 V)
  • Efficiencies up to 95%
  • 115 W/in³ Power Density
  • On/Off Inhibit
  • Under-Voltage Lockout
  • Output Current Limit
  • Over-Temperature Protection
  • Operating Temp: –40 to +85°C
  • Surface Mount Package
  • Safety Agency Approvals (Pending): UL 1950, CSA 22.2 950, EN60950 & VDE

The PTH03000 series of non-isolated power modules are small in size and high on performance. Using double-sided surface mount construction and synchronous rectification technology, these regulators deliver up to 6 A of output current while occupying a PCB area of about half the size of a standard postage stamp. They are an ideal choice for applications where space, performance and cost are important design constraints.

This series operates from an input voltage of 3.3-V to provide step-down power conversion to any output voltage over the range, 0.9 V to 2.5 V. The output voltage of the PTH03000W is set within this range using a single resistor.

Operating features include an on/off inhibit, output voltage adjust (trim), an output current limit, and over-temperature protection.

Target applications include telecom, industrial, and general purpose circuits, including low-power dual-voltage systems that use a DSP, microprocessor, or ASIC.

Package options include both through-hole and surface mount configurations.

The PTH03000 series of non-isolated power modules are small in size and high on performance. Using double-sided surface mount construction and synchronous rectification technology, these regulators deliver up to 6 A of output current while occupying a PCB area of about half the size of a standard postage stamp. They are an ideal choice for applications where space, performance and cost are important design constraints.

This series operates from an input voltage of 3.3-V to provide step-down power conversion to any output voltage over the range, 0.9 V to 2.5 V. The output voltage of the PTH03000W is set within this range using a single resistor.

Operating features include an on/off inhibit, output voltage adjust (trim), an output current limit, and over-temperature protection.

Target applications include telecom, industrial, and general purpose circuits, including low-power dual-voltage systems that use a DSP, microprocessor, or ASIC.

Package options include both through-hole and surface mount configurations.
filter Buscar otro/a Módulos de potencia (inductor integrado)
Descargar

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos PTH03000: 6 A, 3.3-V Input Non-Isolated Wide-Output Adjust Power Module datasheet (Rev. C) 7/01/2004

Pedidos y calidad

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​