Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC

TLV62090

ACTIVO

Convertidor reductor de alta eficiencia 3A en paquete QFN de 3x3 mm

Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS62826 ACTIVO Convertidor reductor, 3 A, entrada de 2.4 V-5.5 V, exactitud del 1 % en VSON-HR de 1.5 mm × 1.5 mm 3-A step-down converter with 1% accuracy in 1.5-mm x 1.5-mm QFN.

Detalles del producto

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 5.5 Vout (min) (V) 0.8 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking, UVLO Fixed, UVLO fixed Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00002 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 5.5 Vout (min) (V) 0.8 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking, UVLO Fixed, UVLO fixed Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00002 Duty cycle (max) (%) 100
VQFN (RGT) 16 9 mm² (3 mm × 3 mm)
  • 2.5 V to 5.5 V Input Voltage Range
  • DCS-Control™
  • Up To 98% Efficiency
  • Power Save Mode
  • 20 µA Operating Quiescent Current
  • 100% Duty Cycle for Lowest Dropout
  • 1.4 MHz Typical Switching Frequency
  • 0.8 V to VIN Adjustable Output Voltage
  • Output Discharge Function
  • Adjustable Softstart
  • Hiccup Short Circuit Protection
  • Output Voltage Tracking
  • Pin-to-Pin Compatible with TPS62090, TLV62095 and TPS62095
  • For Improved Feature Set, See TPS62090
  • Create a Custom Design using the TLV62090 with the WEBENCH® Power Designer
  • 2.5 V to 5.5 V Input Voltage Range
  • DCS-Control™
  • Up To 98% Efficiency
  • Power Save Mode
  • 20 µA Operating Quiescent Current
  • 100% Duty Cycle for Lowest Dropout
  • 1.4 MHz Typical Switching Frequency
  • 0.8 V to VIN Adjustable Output Voltage
  • Output Discharge Function
  • Adjustable Softstart
  • Hiccup Short Circuit Protection
  • Output Voltage Tracking
  • Pin-to-Pin Compatible with TPS62090, TLV62095 and TPS62095
  • For Improved Feature Set, See TPS62090
  • Create a Custom Design using the TLV62090 with the WEBENCH® Power Designer

The TLV62090 device is a high frequency synchronous step-down converter optimized for small solution size, high efficiency and suitable for battery powered applications. To maximize efficiency, the converter operates in pulse width modulation (PWM) mode with a nominal switching frequency of 1.4 MHz and it automatically enters power save mode operation at light load currents. When used in distributed power supplies and point of load regulation, the device allows voltage tracking to other voltage rails and tolerates output capacitors ranging from 10 µF up to 150 µF and beyond. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation.

The output voltage start-up ramp is controlled by the softstart pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable (EN) and power good (PG) pins. In power save mode, the device operates with typically 20-µA quiescent current. Power save mode is entered automatically and seamlessly, maintaining high efficiency over the entire load current range.

The device is available in a 3 mm × 3 mm 16-pin VQFN (RGT) package.

The TLV62090 device is a high frequency synchronous step-down converter optimized for small solution size, high efficiency and suitable for battery powered applications. To maximize efficiency, the converter operates in pulse width modulation (PWM) mode with a nominal switching frequency of 1.4 MHz and it automatically enters power save mode operation at light load currents. When used in distributed power supplies and point of load regulation, the device allows voltage tracking to other voltage rails and tolerates output capacitors ranging from 10 µF up to 150 µF and beyond. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation.

The output voltage start-up ramp is controlled by the softstart pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable (EN) and power good (PG) pins. In power save mode, the device operates with typically 20-µA quiescent current. Power save mode is entered automatically and seamlessly, maintaining high efficiency over the entire load current range.

The device is available in a 3 mm × 3 mm 16-pin VQFN (RGT) package.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS62823 ACTIVO Convertidor reductor de 3 A con entrada de 2.4 V a 5.5 V y exactitud del 1 % en encapsulado VSON-HR 3-A step-down converter with 1% accuracy in QFN.

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 19
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TLV62090 3A High Efficiency Synchronous Step-Down Converter with DCS-Control™ datasheet (Rev. F) PDF | HTML 19/01/2017
Nota sobre la aplicación QFN and SON PCB Attachment (Rev. C) PDF | HTML 6/12/2023
Nota sobre la aplicación Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 23/05/2022
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 14/06/2019
Nota sobre la aplicación Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 11/12/2018
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 22/06/2018
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 24/10/2017
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 24/10/2016
Analog Design Journal Understanding frequency variation in the DCS-Control(TM) topology 30/10/2015
Nota sobre la aplicación Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 17/08/2015
Analog Design Journal Five steps to a great PCB layout for a step-down converter 29/01/2015
Analog Design Journal High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 25/07/2013
Nota sobre la aplicación How to Measure the Control Loop of DCS-Control Devices (Rev. A) 9/08/2012
Nota sobre la aplicación Optimizing the TLV62090 Output Filter 11/05/2012
Analog Design Journal Design considerations for a resistive feedback divider in a DC/DC converter 26/04/2012
Nota sobre la aplicación Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 13/01/2012
Nota sobre la aplicación Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 19/09/2011
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 17/06/2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TLV62090EVM-125 — Módulo de evaluación TLV62090EVM-125

The TLV62090EVM-125 is a fully assembled and tested circuit for evaluating the TLV62090. The TLV62090 is a step-down converter that operates with an input voltage between 2.5 V and 6 Vdc, an output voltage of 1.8 V using external resistors, and can deliver up to 3000 mA of continuous current. The (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

TLV62090 PSpice Unencrypted Transient Model (Rev. A)

SLVM577A.ZIP (24 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TLV62090 TINA-TI Transient Reference Design

SLVM735.TSC (175 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

TLV62090 TINA-TI Transient Spice Model

SLVM736.ZIP (65 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Herramienta de cálculo

SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
Productos y hardware compatibles
Diseño de referencia

TIDC-CC3100MODBOOST — Paquete de inicio del módulo CC3100 de Wi-Fi® SimpleLink™

Add Wi-Fi® to any low-cost, low-power microcontroller (MCU) for Internet of Things (IoT) applications using the CC3100 Module BoosterPack (CC3100MODBOOST), which hosts the CC3100 module (CC3100MOD). The CC3100MODBOOST evaluation board contains everything necessary to easily create IoT solutions - (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RGT) 16 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos