TMP75B
Sensor de temperatura con capacidad para 1.4 V e interfaz I2C/SMBus en factor de forma LM75 y diagra
TMP75B
- Low-Voltage Alternative to LM75 and TMP75
- Digital Output with Standard Two-Wire Serial Interface
- Up to 8 Pin-Programmable Bus Addresses
- Overtemperature ALERT Pin with Programmable Trip Values
- Shutdown Mode for Battery Power Saving
- One-Shot Conversion Mode for Custom Update Rates
- Operating Temperature Range: –55°C to +125°C
- Operating Supply Range: 1.4 V to 3.6 V
- Quiescent Current:
- 45 µA Active (typ)
- 0.3 µA Shutdown (typ)
- Accuracy:
- ±0.5°C (typ) from –20°C to +85°C
- ±1°C (typ) from –55°C to +125°C
- Resolution: 12 Bits (0.0625°C)
- Packages: SOIC-8 and VSSOP-8
The TMP75B is an integrated digital temperature sensor with a 12-bit analog-to-digital converter (ADC) that can operate at a 1.8-V supply, and is pin and register compatible with the industry-standard LM75 and TMP75. This device is available in SOIC-8 and VSSOP-8 packages, and requires no external components to sense the temperature. The TMP75B is capable of reading temperatures with a resolution of 0.0625°C and is specified over a temperature range of –55°C to +125°C.
The TMP75B features SMBus and two-wire interface compatibility, and allows up to eight devices on the same bus with the SMBus overtemperature alert function. The programmable temperature limits and the ALERT pin allow the sensor to operate as a stand-alone thermostat, or an overtemperature alarm for power throttling or system shutdown.
The factory-calibrated temperature accuracy and the noise-immune digital interface make the TMP75B the preferred solution for temperature compensation of other sensors and electronic components, without the need for additional system-level calibration or elaborate board layout for distributed temperature sensing.
The TMP75B is ideal for thermal management and protection of a variety of consumer, computer, communication, industrial, and environmental applications.
Productos similares que pueden interesarle
Documentación técnica
Tipo | Título | Fecha | ||
---|---|---|---|---|
* | Data sheet | TMP75B 1.8-V Digital Temperature Sensor with Two-Wire Interface and Alert datasheet (Rev. B) | PDF | HTML | 20 ago 2014 |
Application note | How to Read and Interpret Digital Temperature Sensor Output Data | PDF | HTML | 12 abr 2024 | |
Application note | LM75B and TMP1075 Industry-Standard Devices: Design Guidelines and Spec Comparison (Rev. A) | PDF | HTML | 07 mar 2024 | |
EVM User's guide | TMP75BEVM and TMP75CEVM User Guide | 10 abr 2014 |
Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
TMP75BEVM — Módulo de evaluación TMP75B para sensor de temperatura de salida digital
The TMP75B is is a digital output temperature sensor capable of reading temperatures of -40ºC to +125ºC with 12 bits (0.0625 C) of resolution. The TMP75B uses a two-wire I2C protocol SMBus interface that allowsup to eight devices on one bus. It is ideal for extended temperature (...)
SBOC439 — TMP75BEVM Software
Productos y hardware compatibles
Productos
Sensores de temperatura digitales
Desarrollo de hardware
Placa de evaluación
TIDA-010008 — Diseño de referencia basado en TVS de abrazadera plana para protección contra transitorios para apli
TIDA-010011 — Diseño de referencia de arquitectura de fuente de alimentación de alta eficiencia para módulo de pro
Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
---|---|---|
SOIC (D) | 8 | Ultra Librarian |
VSSOP (DGK) | 8 | Ultra Librarian |
Pedidos y calidad
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
- Lugar de fabricación
- Lugar de ensamblaje
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.