Inicio Administración de potencia Controladores e interruptores de lado alto Interruptores de lado alto
Inicio
Administración de potencia
Controladores e interruptores de lado alto
Interruptores de lado alto

TPS1HC100-Q1

ACTIVO

Interruptor de lado alto inteligente de un canal, 100 mΩ, 2.5 A, automotriz

Haga su pedido ahora
Hoja de datos

TPS1HC100-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Number of channels 1 Rating Automotive Operating voltage (max) (V) 28 Operating voltage (min) (V) 3 Ron (typ) (mΩ) 100 Imax (A) 2.5 Current limit (max) (A) 6.9 Current limit (min) (A) 0.633 Current limit type Adjustable FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out TI functional safety category Functional Safety-Capable Current limit accuracy +/-18% @ 1.9A Current sense accuracy +/-6% @ 1A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
Number of channels 1 Rating Automotive Operating voltage (max) (V) 28 Operating voltage (min) (V) 3 Ron (typ) (mΩ) 100 Imax (A) 2.5 Current limit (max) (A) 6.9 Current limit (min) (A) 0.633 Current limit type Adjustable FET Internal Features Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out TI functional safety category Functional Safety-Capable Current limit accuracy +/-18% @ 1.9A Current sense accuracy +/-6% @ 1A Operating temperature range (°C) -40 to 125 Function Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown
HTSSOP (PWP) 14 32 mm² 5 x 6.4
  • Single-channel smart high-side power switch for 12V automotive systems with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3V to 28V
  • Low standby current, < 0.5µA at 85°C
  • Operating junction temperature, –40°C to 150°C
  • 1.8V, 3.3V, and 5V logic compatible
  • Fault sense voltage scaling for ADC protection
  • Programmable current limit accuracy ±18% at 1.9A
  • High-accuracy current sense, ±6% at 1A
  • Protection
    • Overload and short-circuit protection
    • Inductive load negative voltage clamp
    • Undervoltage lockout (UVLO) protection
    • Thermal shutdown and swing with self recovery
    • Loss of GND, loss of supply protection
    • Reverse battery protection with external components
  • Diagnostic
    • On- and off-state output open-load and short-to-battery detection
    • Overload and short-to-ground detection
    • Thermal shutdown and swing detection
  • Qualifications
  • 14-pin thermally-enhanced PWP package
  • Single-channel smart high-side power switch for 12V automotive systems with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3V to 28V
  • Low standby current, < 0.5µA at 85°C
  • Operating junction temperature, –40°C to 150°C
  • 1.8V, 3.3V, and 5V logic compatible
  • Fault sense voltage scaling for ADC protection
  • Programmable current limit accuracy ±18% at 1.9A
  • High-accuracy current sense, ±6% at 1A
  • Protection
    • Overload and short-circuit protection
    • Inductive load negative voltage clamp
    • Undervoltage lockout (UVLO) protection
    • Thermal shutdown and swing with self recovery
    • Loss of GND, loss of supply protection
    • Reverse battery protection with external components
  • Diagnostic
    • On- and off-state output open-load and short-to-battery detection
    • Overload and short-to-ground detection
    • Thermal shutdown and swing detection
  • Qualifications
  • 14-pin thermally-enhanced PWP package

The TPS1HC100-Q1 device is a fully protected high-side power switch, with integrated NMOS power FET and charge pump, targeted for the intelligent control of various loads. Accurate current sense and programmable current limit features differentiate it from the market.

Low logic high threshold, VIH, of 1.5V on the input pins allow use of MCUs GPIO signals to 1.8V. High-accuracy current sensing provides a better real-time monitoring effect and more accurate diagnostics without further calibration. The external high-accuracy current limit allows setting the current limit value by application. The device highly improves the reliability of the system by effectively clamping the inrush current under start-up or short-circuit conditions. The TPS1HC100-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including low-wattage bulbs, LEDs, relays, solenoids, and heaters.

The TPS1HC100-Q1 device is a fully protected high-side power switch, with integrated NMOS power FET and charge pump, targeted for the intelligent control of various loads. Accurate current sense and programmable current limit features differentiate it from the market.

Low logic high threshold, VIH, of 1.5V on the input pins allow use of MCUs GPIO signals to 1.8V. High-accuracy current sensing provides a better real-time monitoring effect and more accurate diagnostics without further calibration. The external high-accuracy current limit allows setting the current limit value by application. The device highly improves the reliability of the system by effectively clamping the inrush current under start-up or short-circuit conditions. The TPS1HC100-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including low-wattage bulbs, LEDs, relays, solenoids, and heaters.
filter Buscar otro/a Interruptores de lado alto
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS1HC30-Q1 ACTIVO Interruptor de lado alto inteligente de un canal, 30 mΩ, 5 A, automotriz Same functionality and size with 30-mΩ high-side switch.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Tipo Título Fecha
* Data sheet TPS1HC100-Q1 100mΩ, 2.5A Single-Channel Automotive Smart High-Side Switch datasheet (Rev. B) PDF | HTML 27 feb 2025
Application note Short-to-Ground Testing on TI High Side Switches PDF | HTML 01 jul 2025
Application note Efficiently Driving Automotive Dashboard Loads with TPS1HC100-Q1 PDF | HTML 10 feb 2022
Functional safety information TPS1HC100-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 09 dic 2021
Application brief Driving Front Camera Modules with TPS1HC100-Q1 PDF | HTML 31 ago 2021

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS1HC100EVM — Módulo de evaluación TPS1HC100-Q1 para interruptor de lado alto de 100 mΩ para automoción

El TPS1HC100EVM es un módulo de evaluación (EVM) de hardware que se utiliza para permitir a los ingenieros de hardware evaluar el rendimiento y la funcionalidad completos del interruptor para automoción de lado alto TPS1HC100-Q1. El TPS1HC100EVM contiene todo lo necesario para probar y evaluar el (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

TPS1HC100-Q1 PSpice Transient Model

SLVMDR0.ZIP (64 KB) - PSpice Model
Descargar
Herramienta de cálculo

TPS1HC100-Q1-ILIM-CALC — TPS1HC100-Q1 current limit calculator

Spreadsheet calculator which will give a minimum and maximum current limit value for the TPS1HC100-Q1 based off of a RILIM value (taking into account resistor tolerances)
Productos y hardware compatibles

Productos y hardware compatibles

Productos
Interruptores de lado alto
  • TPS1HC100-Q1 — Interruptor de lado alto inteligente de un canal, 100 mΩ, 2.5 A, automotriz
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
HTSSOP (PWP) 14 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos