Inicio Administración de potencia Interruptores y controladores de protección de potencia Fusibles electrónicos (intercambios en caliente integrados)

TPS25981

ACTIVO

eFuse de 2.7 V a 16 V, 10 A, 6 mΩ con temporizador de supresión de sobrecorriente transitoria

Detalles del producto

Vabsmax_cont (V) 20 Vin (max) (V) 16 Vin (min) (V) 2.7 Current limit (max) (A) 11 Current limit (min) (A) 1.5 Features Adjustable current limit, Adjustable soft start, Overcurrent protection, Overvoltage protection, Quick output discharge, Reverse current blocking when off, Thermal shutdown, adjustable UVLO UL recognition IEC62368, UL2367 Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 6 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.000417 Quiescent current (Iq) (max) (A) 0.00061 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 20 Vin (max) (V) 16 Vin (min) (V) 2.7 Current limit (max) (A) 11 Current limit (min) (A) 1.5 Features Adjustable current limit, Adjustable soft start, Overcurrent protection, Overvoltage protection, Quick output discharge, Reverse current blocking when off, Thermal shutdown, adjustable UVLO UL recognition IEC62368, UL2367 Overcurrent response Circuit breaker Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 6 Overvoltage response Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.000417 Quiescent current (Iq) (max) (A) 0.00061 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
VQFN-HR (RPW) 10 4 mm² (2 mm × 2 mm)
  • Wide operating input voltage range: 2.7V to 16V
    • 20V absolute maximum
  • Integrated FET with low on-resistance: RON = 6mΩ (typical)
  • Fast overvoltage protection
    • Adjustable overvoltage lockout (OVLO) with 1.2µs (typical) response time
  • Overcurrent protection with load current monitor output (ILM)
    • Circuit-breaker response
    • Adjustable threshold (ILIM) 1.5A – 11A
      • ±10% accuracy for ILIM > 5A
    • Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM
    • Output load current monitor accuracy: ±10% (IOUT ≥ 3A)
  • Fast-trip response for short-circuit protection
    • 640ns (typical) response time
    • Adjustable (2 × ILIM) and fixed thresholds
  • Active high enable input with adjustable undervoltage lockout threshold (UVLO)
  • Active low enable input with adjustable undervoltage lockout threshold (OVLO)
  • Adjustable output slew rate control (dVdt)
  • Option to drive external FET for reverse-current blocking in disabled/OFF state
  • Overtemperature protection
  • Quick output discharge
  • Digital outputs
    • Power Good (PG) and fault indication (FLT)
  • UL 2367 recognition
    • File No. E115731
    • RILM ≥ 1.47kΩ
  • IEC 62368-1 CB Certified
  • Small footprint: QFN 2mm × 2mm, 0.45mm pitch
  • Wide operating input voltage range: 2.7V to 16V
    • 20V absolute maximum
  • Integrated FET with low on-resistance: RON = 6mΩ (typical)
  • Fast overvoltage protection
    • Adjustable overvoltage lockout (OVLO) with 1.2µs (typical) response time
  • Overcurrent protection with load current monitor output (ILM)
    • Circuit-breaker response
    • Adjustable threshold (ILIM) 1.5A – 11A
      • ±10% accuracy for ILIM > 5A
    • Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM
    • Output load current monitor accuracy: ±10% (IOUT ≥ 3A)
  • Fast-trip response for short-circuit protection
    • 640ns (typical) response time
    • Adjustable (2 × ILIM) and fixed thresholds
  • Active high enable input with adjustable undervoltage lockout threshold (UVLO)
  • Active low enable input with adjustable undervoltage lockout threshold (OVLO)
  • Adjustable output slew rate control (dVdt)
  • Option to drive external FET for reverse-current blocking in disabled/OFF state
  • Overtemperature protection
  • Quick output discharge
  • Digital outputs
    • Power Good (PG) and fault indication (FLT)
  • UL 2367 recognition
    • File No. E115731
    • RILM ≥ 1.47kΩ
  • IEC 62368-1 CB Certified
  • Small footprint: QFN 2mm × 2mm, 0.45mm pitch

The TPS25981xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges and excessive inrush current.

Output slew rate and inrush current can be adjusted using one external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current (during start-up) or breaking the circuit (during steady-state). The overcurrent protection threshold as well as the transient overcurrent blanking timer are user-adjustable. The current limit control pin also functions as an analog load current monitor.

The devices are available in a 2mm × 2mm, 10-pin HotRod™ QFN package for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range from –40°C to +125°C.

The TPS25981xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges and excessive inrush current.

Output slew rate and inrush current can be adjusted using one external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current (during start-up) or breaking the circuit (during steady-state). The overcurrent protection threshold as well as the transient overcurrent blanking timer are user-adjustable. The current limit control pin also functions as an analog load current monitor.

The devices are available in a 2mm × 2mm, 10-pin HotRod™ QFN package for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range from –40°C to +125°C.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
TPS2597 ACTIVO eFuse de 9.8 mΩ, 2.7 V–23 V, 7 A, con monitor de corriente preciso y supresión de sobrecorriente tra Lower current and higher RON
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS22990 ACTIVO Interruptor de carga de 5.5 V, 10 A, 3.9 mΩ, con tiempo de elevación ajustable, buena potencia y des Offers lower voltage range

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS25981x 2.7V to 16V, 10A, 6mΩ eFuse with Transient Overcurrent Blanking Timer datasheet (Rev. C) PDF | HTML 20/05/2026
Application brief TPS25981 - Making Power Dense PDF | HTML 2/01/2024
Nota sobre la aplicación How eFuse Ensures Integrated FET Operation in Safe Operating Area PDF | HTML 7/09/2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS25981EVM — Módulo de evaluación TPS25981 para eFuse de 2.7 V a 16 V, 10 A, 6 mΩ

La placa de evaluación eFuse TPS25981EVM permite la evaluación del circuito de referencia del eFuse TPS25981. El dispositivo TPS25981 es un eFuse de 2.7 V a 16 V, 10 A con FET de 6 mΩ integrado con protección contra sobrecorriente, corriente de irrupción, temporizador de supresión transitoria de (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

TPS25981 PSpice Transient Model

SLVMDX3.ZIP (102 KB) - Modelo PSpice
Productos y hardware compatibles
Herramienta de cálculo

SLVRBL3 — TPS25981 Design Calculator

Productos y hardware compatibles
Herramienta de cálculo

TVS-RECOMMENDATION-CALC — TVS diode recommendation tool

This tool suggests suitable TVS for given system parameters and abs max voltage rating of the device.
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN-HR (RPW) 10 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos