Inicio Administración de potencia Reguladores conmutados CC/CC Controladores de CC/CC

TPS51219

ACTIVO

Controlador reductor síncrono de 3 V a 28 V con retroalimentación de tensión diferencial

Detalles del producto

Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 28 Vin (min) (V) 3 Vout (max) (V) 2 Vout (min) (V) 0.5 Control mode D-CAP, D-CAP2 Features Enable, Light Load Efficiency, Power good, Pre-Bias Start-Up, Synchronous Rectification Duty cycle (max) (%) 90 Iq (typ) (A) 0.00056 Number of phases 1 Operating temperature range (°C) -40 to 85
Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 28 Vin (min) (V) 3 Vout (max) (V) 2 Vout (min) (V) 0.5 Control mode D-CAP, D-CAP2 Features Enable, Light Load Efficiency, Power good, Pre-Bias Start-Up, Synchronous Rectification Duty cycle (max) (%) 90 Iq (typ) (A) 0.00056 Number of phases 1 Operating temperature range (°C) -40 to 85
WQFN (RTE) 16 9 mm² (3 mm × 3 mm)
  • Differential Voltage Feedback
  • DC Compensation for Accurate Regulation
  • Wide Input Voltage Range: 3 V to 28 V
  • Output Voltage Range: 0.5 V to 2.0 V with
    Fixed Options of 1.05 V and 1.00 V
  • Wide Output Load Range: 0 A to 20 A+
  • Adaptive On-Time Modulation with Selectable Control Architecture and Frequency
    • D-CAP Mode at 300 kHz/400 kHz for Fast Transient Response
    • D-CAP2 Mode at 500 kHz/670 kHz for Ceramic Output Capacitor
  • 4700 ppm/°C, Low-Side RDS(on) Current Sensing
  • RSENSE Accurate Current Sense Option
  • Internal, 1-ms Voltage Servo Softstart
  • Built-In Output Discharge
  • Power Good Output
  • Integrated Boost Switch
  • Built-In OVP/UVP/OCP
  • Thermal Shutdown (Non-latched)
  • 3 mm × 3 mm, 16-Pin, QFN (RTE) Package
  • Differential Voltage Feedback
  • DC Compensation for Accurate Regulation
  • Wide Input Voltage Range: 3 V to 28 V
  • Output Voltage Range: 0.5 V to 2.0 V with
    Fixed Options of 1.05 V and 1.00 V
  • Wide Output Load Range: 0 A to 20 A+
  • Adaptive On-Time Modulation with Selectable Control Architecture and Frequency
    • D-CAP Mode at 300 kHz/400 kHz for Fast Transient Response
    • D-CAP2 Mode at 500 kHz/670 kHz for Ceramic Output Capacitor
  • 4700 ppm/°C, Low-Side RDS(on) Current Sensing
  • RSENSE Accurate Current Sense Option
  • Internal, 1-ms Voltage Servo Softstart
  • Built-In Output Discharge
  • Power Good Output
  • Integrated Boost Switch
  • Built-In OVP/UVP/OCP
  • Thermal Shutdown (Non-latched)
  • 3 mm × 3 mm, 16-Pin, QFN (RTE) Package

The TPS51219 is a small-sized single buck controller with adaptive on-time control. It provides a choice of control modes (D-CAP™ or D-CAP2™) to meet a wide range of system requirements. It is designed for tight DC regulation requirements such as the VCCIO application for Intel notebooks. The performance and flexibility of the TPS51219 makes it suitable for low output voltage, high current, PC system power rails and similar point-of-load (POL) power supplies. Differential voltage feedback and the voltage compensation function combine to provide high precision power to load devices.

A small package, fixed voltage options and minimal external component count saves cost and space, while a dedicated EN pin and pre-set frequency selections minimize design effort. The skip-mode at light load condition, strong gate drivers, and low-side FET RDS(on) current sensing provides high efficiency operation over a broad load range. The external resistor current sense option enables accurate current sensing. The conversion input voltage (the high-side FET drain voltage) ranges from 3 V to 28 V and output voltage ranges from 0.5 V to 2.0 V. The device requires an external 5-V supply.

The TPS51219 is available in a 16-pin, QFN package and is specified for ambient temperature from -40°C to 85°C.

The TPS51219 is a small-sized single buck controller with adaptive on-time control. It provides a choice of control modes (D-CAP™ or D-CAP2™) to meet a wide range of system requirements. It is designed for tight DC regulation requirements such as the VCCIO application for Intel notebooks. The performance and flexibility of the TPS51219 makes it suitable for low output voltage, high current, PC system power rails and similar point-of-load (POL) power supplies. Differential voltage feedback and the voltage compensation function combine to provide high precision power to load devices.

A small package, fixed voltage options and minimal external component count saves cost and space, while a dedicated EN pin and pre-set frequency selections minimize design effort. The skip-mode at light load condition, strong gate drivers, and low-side FET RDS(on) current sensing provides high efficiency operation over a broad load range. The external resistor current sense option enables accurate current sensing. The conversion input voltage (the high-side FET drain voltage) ranges from 3 V to 28 V and output voltage ranges from 0.5 V to 2.0 V. The device requires an external 5-V supply.

The TPS51219 is available in a 16-pin, QFN package and is specified for ambient temperature from -40°C to 85°C.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos High Performance, Single Synchronous Step-Down Controller with Differential Volt datasheet (Rev. B) 1/10/2011
Guía del usuario TPS51219 Buck Controller Evaluation Module User's Guide (Rev. A) PDF | HTML 18/02/2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

TPS51219 IBIS Model

SLUM319.ZIP (10 KB) - Modelo IBIS
Productos y hardware compatibles
Modelo de simulación

TPS51219 TINA-TI Average DCAP Reference Design

SLUM261.TSC (66 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

TPS51219 TINA-TI Average DCAP Spice Model

SLUM262.ZIP (5 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Modelo de simulación

TPS51219 TINA-TI Average DCAP2 Reference Design

SLUM269.TSC (75 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

TPS51219 TINA-TI Average DCAP2 Spice Model

SLUM270.ZIP (7 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Modelo de simulación

TPS51219 TINA-TI Transient Reference Design

SLUM263.TSC (218 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

TPS51219 TINA-TI Transient Spice Model

SLUM264.ZIP (62 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Modelo de simulación

TPS51219 Unencrypted PSpice Average Model Package (Rev. A)

SLUM232A.ZIP (153 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

TPS51219 Unencrypted PSpice Transient Model Package (Rev. A)

SLUM233A.ZIP (57 KB) - Modelo PSpice
Productos y hardware compatibles
Diseño de referencia

TIDA-00020 — Diseño de referencia de administración de potencia Intel IMVP7 Core Mobile de 2.ª generación (Core i

The Intel® Core i7 power management design is a reference design for the Intel® IMVP-7 Serial VID (SVID) power system. This design features an IMVP-7 3-phase CPU supply, a single-phase GPU Vcore supply, a 1.05-VCC IO supply, and a DDR3L/DDR4 memory rail. To greatly improve power (...)

Productos y hardware compatibles
Diseño de referencia

TIPA-050005 — Soluciones en el punto de carga no aisladas para Tiger Lake en aplicaciones de PC

Los procesadores y plataformas avanzados, como la microarquitectura Intel® Tiger Lake, necesitan soluciones de punto de carga (POL) para memoria, rieles de unidad central de procesamiento (CPU) de baja potencia y requisitos de carril de 3.3 V y 5 V a partir de una variedad de baterías recargables o (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RTE) 16 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos