Inicio Administración de potencia Controladores CA/CC y CC/CC (FET externo)

TPS53119

ACTIVO

Controlador reductor D-CAP síncrono de 3 V a 26 V, 20 A, con modo ecológico

Detalles del producto

Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 26 Vin (min) (V) 3 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Control mode D-CAP Features Adjustable current limit, Enable, Light-load efficiency, Power good, Prebias startup Operating temperature range (°C) -20 to 85 Iq (typ) (µA) 400 Duty cycle (max) (%) 90 Number of phases 1
Rating Catalog Topology Buck Iout (max) (A) 20 Vin (max) (V) 26 Vin (min) (V) 3 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Control mode D-CAP Features Adjustable current limit, Enable, Light-load efficiency, Power good, Prebias startup Operating temperature range (°C) -20 to 85 Iq (typ) (µA) 400 Duty cycle (max) (%) 90 Number of phases 1
VQFN (RGT) 16 9 mm² 3 x 3
  • Conversion input voltage range: 3 V to 26 V
  • VDD input voltage range: 4.5 V to 25 V
  • Output voltage range: 0.6 V to 5.5 V
  • Built-In 0.6-V (±0.8%) reference
  • Built-In LDO linear voltage regulator
  • Auto-skip Eco-Mode™ for light-load efficiency
  • D-CAP™ mode with 100-ns load-step response
  • Adaptive ON-time control architecture with 8 selectable frequency settings
  • 4700-ppm/°C RDS(on) current sensing
  • 0.7-ms, 1.4-ms, 2.8-ms and 5.6-ms Selectable internal voltage servo soft start
  • Pre-charged start-up capability
  • Built-in output discharge
  • Open-drain power-good output
  • Integrated boost switch
  • Built-In OVP/UVP/OCP
  • Thermal shutdown (non-latch)
  • 3-mm × 3-mm 16-Pin VQFN (RGT) package
  • Create a custom design using the TPS53119 with the WEBENCH® Power Designer
  • Conversion input voltage range: 3 V to 26 V
  • VDD input voltage range: 4.5 V to 25 V
  • Output voltage range: 0.6 V to 5.5 V
  • Built-In 0.6-V (±0.8%) reference
  • Built-In LDO linear voltage regulator
  • Auto-skip Eco-Mode™ for light-load efficiency
  • D-CAP™ mode with 100-ns load-step response
  • Adaptive ON-time control architecture with 8 selectable frequency settings
  • 4700-ppm/°C RDS(on) current sensing
  • 0.7-ms, 1.4-ms, 2.8-ms and 5.6-ms Selectable internal voltage servo soft start
  • Pre-charged start-up capability
  • Built-in output discharge
  • Open-drain power-good output
  • Integrated boost switch
  • Built-In OVP/UVP/OCP
  • Thermal shutdown (non-latch)
  • 3-mm × 3-mm 16-Pin VQFN (RGT) package
  • Create a custom design using the TPS53119 with the WEBENCH® Power Designer

The TPS53119 device is a small-sized single buck controller with adaptive ON-time D-CAP mode control. The device is designed for low output voltage, high current, PC system power rail and similar point-of-load (POL) power supplies in digital consumer products. The small package and minimal pin count save space on the PCB, while the dedicated EN pin and pre-set frequency selections simplify the power supply design. The skip mode at light load conditions, strong gate drivers, and low-side FET RDS(on) current sensing supports low loss and high efficiency over a broad load range. The conversion input voltage (high-side FET drain voltage) range is between 4.5 V and 25 V, and the output voltage range is between 0.6 V and 5.5 V. The TPS53119 is available in a 16-pin VQFN package specified from –20°C to +85°C.

The TPS53119 device is a small-sized single buck controller with adaptive ON-time D-CAP mode control. The device is designed for low output voltage, high current, PC system power rail and similar point-of-load (POL) power supplies in digital consumer products. The small package and minimal pin count save space on the PCB, while the dedicated EN pin and pre-set frequency selections simplify the power supply design. The skip mode at light load conditions, strong gate drivers, and low-side FET RDS(on) current sensing supports low loss and high efficiency over a broad load range. The conversion input voltage (high-side FET drain voltage) range is between 4.5 V and 25 V, and the output voltage range is between 0.6 V and 5.5 V. The TPS53119 is available in a 16-pin VQFN package specified from –20°C to +85°C.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
TPS56837 ACTIVO Convertidor reductor síncrono de 8 A y entrada de 4.5 V a 28 V Higher power density integrated FET converter solution for up to 8A output current

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Tipo Título Fecha
* Data sheet TPS53119 Wide input voltage, Eco-Mode, synchronous step-down controller datasheet (Rev. A) PDF | HTML 22 mar 2019
User guide TPS53119 Buck Controller Evaluation Module User's Guide (Rev. A) PDF | HTML 26 ene 2022
White paper Power solution options for data center applications (Rev. A) 27 feb 2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS53119EVM-690 — Módulo de evaluación de controlador reductor síncrono simple con Eco-Mode™ TPS53119

El módulo de evaluación (EVM) TPS53119EVM-690 utiliza el TPS53119. El TPS53119 es un controlador buck único de tamaño pequeño con control de modo D-CAP™ de tiempo de conexión adaptativo. Proporciona una salida fija de 1.1 V de hasta 25 A desde un bus de entrada de 12 V.
Guía del usuario: PDF | HTML
Modelo de simulación

TPS53119 PSpice Transient Model

SLUM609.ZIP (66 KB) - PSpice Model
Modelo de simulación

TPS53119 Unencrypted PSpice Transient Model

SLUM610.ZIP (7 KB) - PSpice Model
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN (RGT) 16 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos