Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC

TPS60150

ACTIVO

Bomba de carga de 5 V y 140 mA en SON 2 × 2

Detalles del producto

Rating Catalog Iout (max) (A) 0.14 Vin (max) (V) 5.5 Vin (min) (V) 2.7 Vout (max) (V) 5 Vout (min) (V) 5 Features Enable, Regulated Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.00008 Sector Test & measurement
Rating Catalog Iout (max) (A) 0.14 Vin (max) (V) 5.5 Vin (min) (V) 2.7 Vout (max) (V) 5 Vout (min) (V) 5 Features Enable, Regulated Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.00008 Sector Test & measurement
WSON (DRV) 6 4 mm² (2 mm × 2 mm)
  • 2.7V to 5.5V input voltage range
  • 5V fixed output voltage
  • 140mA maximum output current
  • 1.5MHz switching frequency
  • Typical 90µA quiescent current at no load condition (skip mode)
  • X2 charge pump
  • Hardware enable and disable function
  • Built-in soft start
  • Built-in undervoltage lockout protection
  • Thermal and overcurrent protection
  • Available in a 2mm × 2mm 6-pin SON package with 0.8mm height
  • 2.7V to 5.5V input voltage range
  • 5V fixed output voltage
  • 140mA maximum output current
  • 1.5MHz switching frequency
  • Typical 90µA quiescent current at no load condition (skip mode)
  • X2 charge pump
  • Hardware enable and disable function
  • Built-in soft start
  • Built-in undervoltage lockout protection
  • Thermal and overcurrent protection
  • Available in a 2mm × 2mm 6-pin SON package with 0.8mm height

The TPS60150 device is a switched capacitor voltage converter that produces a regulated, low noise, and low-ripple output voltage of 5V from an unregulated input voltage.

The 5V output can supply a minimum of 140mA current.

The TPS60150 device operates in skip mode when the load current falls less than 8mA under typical condition. In skip mode operation, quiescent current is reduced to 90µA.

Only three external capacitors are needed to generate the output voltage, therefore saving PCB space.

Inrush current is limited by the soft-start function during power on and power transient states.

The TPS60150 device operates over a free-air temperature range of –40°C to 85°C. The device is available with a small 2mm × 2mm 6-pin SON package (QFN).

The TPS60150 device is a switched capacitor voltage converter that produces a regulated, low noise, and low-ripple output voltage of 5V from an unregulated input voltage.

The 5V output can supply a minimum of 140mA current.

The TPS60150 device operates in skip mode when the load current falls less than 8mA under typical condition. In skip mode operation, quiescent current is reduced to 90µA.

Only three external capacitors are needed to generate the output voltage, therefore saving PCB space.

Inrush current is limited by the soft-start function during power on and power transient states.

The TPS60150 device operates over a free-air temperature range of –40°C to 85°C. The device is available with a small 2mm × 2mm 6-pin SON package (QFN).

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos TPS60150 5V, 140mA Charge-Pump datasheet (Rev. D) PDF | HTML 27/04/2026
Nota sobre la aplicación QFN and SON PCB Attachment (Rev. C) PDF | HTML 6/12/2023
Nota sobre la aplicación Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 11/12/2018
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018
Nota sobre la aplicación Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 15/06/2017
Artículo técnico How to overcome automotive front-end design challenges PDF | HTML 10/09/2015

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS60150EVM-359 — Módulo de evaluación TPS60150EVM-359

The TPS60150EVM-359 facilitates evaluation of the TPS60150 150mA Charge Pump.

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Diseño de referencia

PMP10652 — Diseño de referencia a nivel de sistema para un sistema ADAS de 30 W con las protecciones necesarias

PMP10652 is a System optimized (CISPR 25 Class 3) 30W design for Surround View ADAS system.

The design has various protections such as Load dump through TVS (ISO pulse testing), Reverse Voltage (Innovative Smart diode with very low Iq), Battery Disconnect Switch with OVP protection (PFET) and is EMI (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WSON (DRV) 6 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos