Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC
Inicio
Administración de potencia
Reguladores conmutados CC/CC
Convertidores de CC/CC
NUEVO

TPS61290

ACTIVO

Convertidor boost sincrónico de 5,5 V y 11 A, con modo de derivación e interfaz I2C

Haga su pedido ahora
Hoja de datos

TPS61290

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Topology Boost Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 5.5 Vout (min) (V) 2.35 Switch current limit (typ) (A) 11 Features Adjustable current limit, Automatic PWM/PFM transition, Enable, I2C, Load Disconnect, Output discharge, Pass-through mode, Spread Spectrum, Synchronous rectification EMI features Spread Spectrum Operating temperature range (°C) to Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
Rating Catalog Topology Boost Vin (max) (V) 5.5 Vin (min) (V) 2 Vout (max) (V) 5.5 Vout (min) (V) 2.35 Switch current limit (typ) (A) 11 Features Adjustable current limit, Automatic PWM/PFM transition, Enable, I2C, Load Disconnect, Output discharge, Pass-through mode, Spread Spectrum, Synchronous rectification EMI features Spread Spectrum Operating temperature range (°C) to Iq (typ) (A) 0.00002 Duty cycle (max) (%) 90
DSBGA (YBG) 16 2.486929 mm² 1.577 x 1.577
  • Wide VIN range from 1.8V to 5.5V
    • Start-up input voltage: 2.2V
  • Programmable average input current limit (3.5A to 11A) through I2C
  • Programmable output voltage (2.35V to 5.5V) through I2C.
    • For TPS61290, default 3.4V
    • For TPS612901, if VSEL = L, default 5V; if VSEL = H, default 5.25V
  • < 150mV undershoot at VIN = 2.7V, VOUT = 3.4V, IOUT = 0A → 3A (0.2A/µs slew rate)
  • Integrated bypass MOSFET (8mΩ), high-side MOSFET (8mΩ), low-side MOSFET (10mΩ)
  • Auto bypass mode when VIN > VOUT
  • Auto PFM operation or Forced PWM selectable at light load
  • Output discharge function when EN logic is low
  • True disconnection between input and output during shutdown
  • Thermal shutdown and over current protection
  • I2C compatible I/F up to 1Mbps
  • 1.2V I/O logic control interface
  • 16-ball WCSP package
  • Wide VIN range from 1.8V to 5.5V
    • Start-up input voltage: 2.2V
  • Programmable average input current limit (3.5A to 11A) through I2C
  • Programmable output voltage (2.35V to 5.5V) through I2C.
    • For TPS61290, default 3.4V
    • For TPS612901, if VSEL = L, default 5V; if VSEL = H, default 5.25V
  • < 150mV undershoot at VIN = 2.7V, VOUT = 3.4V, IOUT = 0A → 3A (0.2A/µs slew rate)
  • Integrated bypass MOSFET (8mΩ), high-side MOSFET (8mΩ), low-side MOSFET (10mΩ)
  • Auto bypass mode when VIN > VOUT
  • Auto PFM operation or Forced PWM selectable at light load
  • Output discharge function when EN logic is low
  • True disconnection between input and output during shutdown
  • Thermal shutdown and over current protection
  • I2C compatible I/F up to 1Mbps
  • 1.2V I/O logic control interface
  • 16-ball WCSP package

The TPS61290x provides a power supply design for products powered by a nickel-rich, silicon anode, Li-ion, or LiFePO4 battery. The voltage range is optimized for single-cell portable applications like in smart-phones or POS terminal.

Used as a high-power pre-regulator, the device extends the battery run-time and overcomes input current and voltage limitations of the powered system. With a wide input voltage range of 1.8V to 5.5V. Program the output voltage by I2C up to 5.5V. The default output voltage of TPS61290 is 3.4V. The default output voltage of TPS612901 is 5V (VSEL = Low) and 5.25V (VSEL = High).

During operation, when the battery is in a good state of charge, the TPS61290x works in bypass mode, connecting the battery to the power supply system through the bypass FET. If the battery gets to a lower state of charge and the voltage becomes lower than the desired minimum system voltage, the device seamlessly transits into boost mode to use the full battery capacity.

The TPS61290x offers a very small design size with a 16-ball YBG package.

The TPS61290x provides a power supply design for products powered by a nickel-rich, silicon anode, Li-ion, or LiFePO4 battery. The voltage range is optimized for single-cell portable applications like in smart-phones or POS terminal.

Used as a high-power pre-regulator, the device extends the battery run-time and overcomes input current and voltage limitations of the powered system. With a wide input voltage range of 1.8V to 5.5V. Program the output voltage by I2C up to 5.5V. The default output voltage of TPS61290 is 3.4V. The default output voltage of TPS612901 is 5V (VSEL = Low) and 5.25V (VSEL = High).

During operation, when the battery is in a good state of charge, the TPS61290x works in bypass mode, connecting the battery to the power supply system through the bypass FET. If the battery gets to a lower state of charge and the voltage becomes lower than the desired minimum system voltage, the device seamlessly transits into boost mode to use the full battery capacity.

The TPS61290x offers a very small design size with a 16-ball YBG package.
filter Buscar otro/a Convertidores de CC/CC
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet TPS61290x 5.5V, 11A, Synchronous Boost Converter With Bypass Mode, I2 C Interface, and Fast Transient Response datasheet PDF | HTML 15 jun 2026
EVM User's guide TPS61290 Boost Converter With Bypass Mode Evaluation Module PDF | HTML 15 jun 2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS61290EVM — TPS61290 evaluation module

The TPS61290EVM is designed to demonstrate the features and functionality of the TPS61290x device, which is a high-performance, high-efficiency, synchronous boost converter with bypass mode and I2C interface. The factory default settings of the TPS61290EVM allow the operation with an input voltage (...)

Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

TPS61290 PSpice Transient Model

SLVMF47.ZIP (96 KB) - PSpice Model
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YBG) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos