TPS62261

ACTIVO

Convertidor reductor de 2.25 MHz y 600 mA en encapsulado TSOT23/SON de 2 x 2 mm

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPS6226x 2.25-MHz 600-mA Step Down Converter in 2 x 2 WSON and SOT Package datasheet (Rev. E) (Inglés) PDF | HTML

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

TPS628510

ACTIVO

Convertidor reductor de frecuencia fija de 2.7 V a 6 V y 0.5 A en encapsulado SOT583 Smaller solution size in SOT583 package

TPS62261

ACTIVO

Haga su pedido ahora

Detalles del producto

Rating

Catalog

Topology

Buck

Iout (max) (A)

0.6

Vin (max) (V)

6

Vin (min) (V)

2

Vout (max) (V)

1.8

Vout (min) (V)

1.8

Features

Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000015

Duty cycle (max) (%)

100

Rating

Catalog

Topology

Buck

Iout (max) (A)

0.6

Vin (max) (V)

6

Vin (min) (V)

2

Vout (max) (V)

1.8

Vout (min) (V)

1.8

Features

Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000015

Duty cycle (max) (%)

100

WSON (DRV)

6

4 mm² (2 mm × 2 mm)

High Efficiency Step-Down Converter
Output Current up to 600 mA
V_IN Range from 2 V to 6 V for Li-ion Batteries with
Extended Voltage Range
2.25-MHz Fixed Frequency Operation
Power Save Mode at Light Load Currents
Output Voltage Accuracy in PWM Mode ±1.5%
Typical 15-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Voltage Positioning at Light Loads
Available in a SOT (5) and 2-mm × 2-mm × 0.8-
mm WSON (6) Package
Allows <1-mm Solution Height
APPLICATIONS
- Mobile Phones, Smart Phones
- Low Power DSP Supply
- Portable Media Players
- Point-of-Load (POL) Applications

All other trademarks are the property of their respective owners

High Efficiency Step-Down Converter
Output Current up to 600 mA
V_IN Range from 2 V to 6 V for Li-ion Batteries with
Extended Voltage Range
2.25-MHz Fixed Frequency Operation
Power Save Mode at Light Load Currents
Output Voltage Accuracy in PWM Mode ±1.5%
Typical 15-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Voltage Positioning at Light Loads
Available in a SOT (5) and 2-mm × 2-mm × 0.8-
mm WSON (6) Package
Allows <1-mm Solution Height
APPLICATIONS
- Mobile Phones, Smart Phones
- Low Power DSP Supply
- Portable Media Players
- Point-of-Load (POL) Applications

All other trademarks are the property of their respective owners

The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.

With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.

The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6226x operates over a free air temperature range of –40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.

The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.

With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.

The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6226x operates over a free air temperature range of –40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.

filter

Buscar otro/a Convertidores de CC/CC

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 12

Documentación principal	Tipo	Título	Opciones de formato
*	Hoja de datos	TPS6226x 2.25-MHz 600-mA Step Down Converter in 2 x 2 WSON and SOT Package datasheet (Rev. E)	PDF \| HTML	30/07/2015
	Nota sobre la aplicación	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	6/12/2023
	Nota sobre la aplicación	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		11/12/2018
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		22/06/2018
	Nota sobre la aplicación	Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B)		29/11/2017
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		24/10/2017
	Nota sobre la aplicación	Extending the Soft Start Time Without a Soft Start Pin (Rev. B)		15/06/2017
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		24/10/2016
	Nota sobre la aplicación	Basic Calculation of a Buck Converter's Power Stage (Rev. B)	PDF \| HTML	17/08/2015
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		29/01/2015
	Nota sobre la aplicación	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		13/01/2012
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		17/06/2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación