TPS62410-Q1

Name: TPS62410-Q1
Brand: TI
SKU: TPS62410-Q1
Price: 0.964 USD

ACTIVO

Convertidor reductor doble (800 mA/800 mA) de 2.5 V a 6 V y frecuencia fija de 2.25 MHz para automoc

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPS62410-Q1 2.25MHz 2x800mA Dual Step Down Converter In Small 3x3mm QFN Package datasheet (Inglés)

Se encuentra disponible una versión más nueva de este producto

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

TPS62442-Q1

ACTIVO

Convertidor reductor de 2.75 V a 6 V para automoción, doble salida de 2 A o 3 A y 1 A, frecuencia aj Different output current (1 A / 600 mA)

TPS62410-Q1

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Rating

Automotive

Topology

Buck

Iout (max) (A)

0.8

Vin (max) (V)

6

Vin (min) (V)

2.5

Vout (max) (V)

6

Vout (min) (V)

0.6

Features

Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, Light Load Efficiency, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.000032

Duty cycle (max) (%)

100

Rating

Automotive

Topology

Buck

Iout (max) (A)

0.8

Vin (max) (V)

6

Vin (min) (V)

2.5

Vout (max) (V)

6

Vout (min) (V)

0.6

Features

Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, Light Load Efficiency, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.000032

Duty cycle (max) (%)

100

VSON (DRC)

10

9 mm² 3 x 3

Qualified for Automotive Applications
High Efficiency—up to 95%
V_IN Range From 2.5 V to 6 V
2.25 MHz Fixed Frequency Operation
Output Current 2 × 800mA
Adjustable Output Voltage From 0.6 V to V_IN
EasyScale™ Optional One Pin Serial Interface for
Dynamic Output Voltage Adjustment
Power Save Mode at Light Load Currents
180° Out of Phase Operation
Output Voltage Accuracy in PWM Mode ±1%
Typical 32 µA Quiescent Current for both Converters
100% Duty Cycle for Lowest Dropout
Available in a 10-Pin QFN (3×3mm)

EasyScale, PowerPAD are trademarks of Texas Instruments.

Qualified for Automotive Applications
High Efficiency—up to 95%
V_IN Range From 2.5 V to 6 V
2.25 MHz Fixed Frequency Operation
Output Current 2 × 800mA
Adjustable Output Voltage From 0.6 V to V_IN
EasyScale™ Optional One Pin Serial Interface for
Dynamic Output Voltage Adjustment
Power Save Mode at Light Load Currents
180° Out of Phase Operation
Output Voltage Accuracy in PWM Mode ±1%
Typical 32 µA Quiescent Current for both Converters
100% Duty Cycle for Lowest Dropout
Available in a 10-Pin QFN (3×3mm)

EasyScale, PowerPAD are trademarks of Texas Instruments.

The TPS62410 device is a synchronous dual step-down DC-DC converter optimized for battery powered portable applications. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3V or 5V voltage rail.

With an input voltage range of 2.5V to 6V, the TPS62410 is ideal to power portable applications like smart phones, PDAs, and other portable equipment.

With the EasyScale™ serial interface the output voltages can be modified during operation. It therefore supports Dynamic Voltage Scaling for low power DSP and processors.

The TPS62410 operates at 2.25MHz fixed switching frequency and enter the Power Save Mode operation at light load currents to maintain high efficiency over the entire load current range. For low noise applications the devices can be forced into fixed frequency PWM mode by pulling the MODE/DATA pin high. In the shutdown mode, the current consumption is reduced to 1.2µA. The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS62410 is available in a 10-pin leadless package (3×3mm QFN).

The TPS62410 device is a synchronous dual step-down DC-DC converter optimized for battery powered portable applications. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3V or 5V voltage rail.

With an input voltage range of 2.5V to 6V, the TPS62410 is ideal to power portable applications like smart phones, PDAs, and other portable equipment.

With the EasyScale™ serial interface the output voltages can be modified during operation. It therefore supports Dynamic Voltage Scaling for low power DSP and processors.

The TPS62410 operates at 2.25MHz fixed switching frequency and enter the Power Save Mode operation at light load currents to maintain high efficiency over the entire load current range. For low noise applications the devices can be forced into fixed frequency PWM mode by pulling the MODE/DATA pin high. In the shutdown mode, the current consumption is reduced to 1.2µA. The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS62410 is available in a 10-pin leadless package (3×3mm QFN).

filter

Buscar otro/a DC/DC converters

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Misma funcionalidad con diferente configuración de pines que el dispositivo comparado

TPS62420-Q1

ACTIVO

Convertidor reductor doble (1 A/600 mA) de 2.5 V a 6 V y frecuencia fija de 2.25 MHz con interfaz de Different output current (1 A / 600 mA)

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 13

Documentación principal	Tipo	Título	Opciones de formato	Fecha
*	Data sheet	TPS62410-Q1 2.25MHz 2x800mA Dual Step Down Converter In Small 3x3mm QFN Package datasheet		29 mar 2010
	Application note	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	06 dic 2023
	Analog Design Journal	Methods of output-voltage adjustment for DC/DC converters		14 jun 2019
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		11 dic 2018
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		22 jun 2018
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		24 oct 2017
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		24 oct 2016
	Application note	Basic Calculation of a Buck Converter's Power Stage (Rev. B)		17 ago 2015
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		29 ene 2015
	White paper	Power Management IC (PMIC) Guide for Automotive (Rev. A)		29 oct 2014
	Analog Design Journal	Design considerations for a resistive feedback divider in a DC/DC converter		26 abr 2012
	Application note	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		13 ene 2012
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		17 jun 2011

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS62410Q1-EVM — Módulo de evaluación TPS62410-Q1 de convertidor reductor doble de 3.6 V

El módulo de evaluación (EVM) TPS62410Q1-EVM de Texas Instruments ayuda a los diseñadores a evaluar el funcionamiento y el rendimiento del TPS62410-Q1, un convertidor reductor doble de CC a CC.

Guía del usuario: PDF