Inicio Gestión de la energía AC/DC & DC/DC converters (integrated FET)

TPS628303

ACTIVO

Convertidor reductor de 2.25 V a 5.5 V, 3 A y precisión del 1 % en encapsulados pequeños QFN y SOT58

Detalles del producto

Iout (max) (A) 3 Vin (min) (V) 2.25 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 2000 Switching frequency (max) (kHz) 2000 Features 1.2-V compatible control inputs, Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, UVLO Fixed Control mode DCS-Control Vout (min) (V) 0.5 Vout (max) (V) 4.5 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000007
Iout (max) (A) 3 Vin (min) (V) 2.25 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 2000 Switching frequency (max) (kHz) 2000 Features 1.2-V compatible control inputs, Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, UVLO Fixed Control mode DCS-Control Vout (min) (V) 0.5 Vout (max) (V) 4.5 Rating Catalog Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000007
SOT-5X3 (DRL) 8 3.36 mm² 2.1 x 1.6 WQFN-HR (RZE) 8 2 mm² 1 x 2
  • 2.25V to 5.5V input voltage range
  • 0.5V to 4.5V adjustable output voltage
  • 1% FB voltage accuracy (–40°C to 125°C TJ)
  • Optimized EMI performance
  • Facilitates CISPR 11/32 compliance
    • Integrated on-chip noise-filtering capacitors
    • Measurements according to CISPR available
  • Excellent transient response
  • 7µA operating quiescent current
  • 2.0MHz switching frequency
  • 35mΩ and 18mΩ internal power MOSFETs
  • DCS-Control topology
  • MODE pin for conduction mode selection
  • Supports 1.2V GPIO
  • 100% duty cycle for lowest dropout
  • Active output discharge
  • Power-good output
  • Thermal shutdown protection
  • Hiccup or latch-off OCP/OVP
  • SIMPLIS model available
  • Create a custom design using the TPS62830x with WEBENCH® Power Designer
  • 2.25V to 5.5V input voltage range
  • 0.5V to 4.5V adjustable output voltage
  • 1% FB voltage accuracy (–40°C to 125°C TJ)
  • Optimized EMI performance
  • Facilitates CISPR 11/32 compliance
    • Integrated on-chip noise-filtering capacitors
    • Measurements according to CISPR available
  • Excellent transient response
  • 7µA operating quiescent current
  • 2.0MHz switching frequency
  • 35mΩ and 18mΩ internal power MOSFETs
  • DCS-Control topology
  • MODE pin for conduction mode selection
  • Supports 1.2V GPIO
  • 100% duty cycle for lowest dropout
  • Active output discharge
  • Power-good output
  • Thermal shutdown protection
  • Hiccup or latch-off OCP/OVP
  • SIMPLIS model available
  • Create a custom design using the TPS62830x with WEBENCH® Power Designer

The TPS62830x is an easy-to-use, synchronous, step-down, DC/DC converters family with low quiescent current. Based on the DCS-Control topology, TPS62830x provides a fast transient response with small output capacitance. The internal reference allows to regulate the output voltage down to 0.5V with a high feedback voltage accuracy of 1% over the junction temperature range of –40°C to 125°C. The family is available in two packages and each package devices are pin-to-pin compatible.

The TPS62830x has a MODE pin to control the device mode of operation. Power save mode maintains high efficiency down to very light loads for extending the system battery run-time. Forced-PWM mode maintains a continuous conduction mode to make sure the least ripple in the output voltage and a quasi-fixed switching frequency. The device features a Power-Good signal and a well-controlled internal soft-start circuit. TPS62830x is able to operate in 100% mode. For fault protection, TPS62830x incorporates a HICCUP short-circuit protection as well as a thermal shutdown. One device option has a latch-off protection for short circuit as well as overvoltage incidents. The family is available in two packages: an 8-pin 1.0mm × 2.0mm QFN package, offering the highest power density design, and an 8-pin 1.6mm × 2.1mm SOT583 package, offering an easy-to-assemble designs.

The TPS62830x is an easy-to-use, synchronous, step-down, DC/DC converters family with low quiescent current. Based on the DCS-Control topology, TPS62830x provides a fast transient response with small output capacitance. The internal reference allows to regulate the output voltage down to 0.5V with a high feedback voltage accuracy of 1% over the junction temperature range of –40°C to 125°C. The family is available in two packages and each package devices are pin-to-pin compatible.

The TPS62830x has a MODE pin to control the device mode of operation. Power save mode maintains high efficiency down to very light loads for extending the system battery run-time. Forced-PWM mode maintains a continuous conduction mode to make sure the least ripple in the output voltage and a quasi-fixed switching frequency. The device features a Power-Good signal and a well-controlled internal soft-start circuit. TPS62830x is able to operate in 100% mode. For fault protection, TPS62830x incorporates a HICCUP short-circuit protection as well as a thermal shutdown. One device option has a latch-off protection for short circuit as well as overvoltage incidents. The family is available in two packages: an 8-pin 1.0mm × 2.0mm QFN package, offering the highest power density design, and an 8-pin 1.6mm × 2.1mm SOT583 package, offering an easy-to-assemble designs.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Pin por pin con la misma funcionalidad que el dispositivo comparado
NUEVO TPS628302 ACTIVO Convertidor reductor de 2.25 V a 5.5 V, 2 A y precisión del 1 % en encapsulados pequeños QFN y SOT58 Lower output current alternative.
NUEVO TPS628304 ACTIVO Convertidor reductor de 2.25 V a 5.5 V, 4 A y precisión del 1 % en encapsulados pequeños QFN y SOT58 Higher output current alternative.
Funcionalidad similar a la del dispositivo comparado
NUEVO TPSM828303 ACTIVO Módulo reductor de bajo ruido en encapsulado QFN, 2.25 V a 5.5 V, 3 A, con inductor integrado Module with integrated inductor

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 5
Tipo Título Fecha
* Data sheet TPS62830x, 2.25V to 5.5V Input, 1, 2, 3, 4A Step-Down Converter With 1% Output Accuracy in Small WQFN and SOT583 Packages datasheet (Rev. B) PDF | HTML 27 mar 2024
Application note Power Supply Design for AMD Versal™ AI Edge Series PDF | HTML 29 ene 2024
Certificate TPS628303ARZEREVM EU RoHS Declaration of Conformity (DoC) 08 dic 2022
Certificate TPS628303BDRLEVM EU RoHS Declaration of Conformity (DoC) 08 dic 2022
Certificate TPS628303ADRLEVM EU RoHS Declaration of Conformity (DoC) 02 dic 2022

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS628303ADRLEVM — Módulo de evaluación para TPS628303A, un convertidor reductor de 3 A en encapsulado SOT583 de 1.6 x

El módulo de evaluación (EVM) TPS628303ADRLEVM facilita la evaluación del convertidor reductor TPS628303A, de 3.0 A, en un encapsulado SOT583 de 1.6 mm × 2.1 mm × 0.6 mm. El EVM convierte una tensión de entrada de 2.25 V a 5.5 V en una tensión de salida regulada de 1.8 V. El TPS628303A es un (...)
Guía del usuario: PDF | HTML
Placa de evaluación

TPS628303ARZEREVM — Módulo de evaluación para TPS628303A, un convertidor reductor de 3 A en encapsulado QFN de 1.0 x 2.0

El módulo de evaluación (EVM) TPS628303ARZEREVM facilita la evaluación del convertidor reductor TPS628303A, de 3 A, en un encapsulado QFN de 1.0 mm x 2.0 mm x 0.8 mm. El EVM convierte una tensión de entrada de 2.25 V a 5.5 V en una tensión de salida regulada de 1.8 V. El TPS628303A es un (...)

Guía del usuario: PDF | HTML
Placa de evaluación

TPS628303BDRLEVM — Módulo de evaluación para TPS628303B, un convertidor reductor de 3 A en encapsulado SOT583 de 1.6 x

El módulo de evaluación (EVM) TPS628303BDRLEVM facilita la evaluación del convertidor reductor TPS628303B, de 3 A, en un encapsulado SOT583 de 1.6 mm x 2.1 mm x 0.6 mm. La EVM convierte una tensión de entrada de 2.25 V a 5.5 V en una tensión de salida regulada de 1.8 V. El TPS628303B es un (...)

Guía del usuario: PDF | HTML
Modelo de simulación

TPS628303A PSPICE Encrypted Transient Model

SLVME47.ZIP (1645 KB) - PSpice Model
Modelo de simulación

TPS628303A SIMPLIS Encrypted Transient and Average Model

SLVME23.ZIP (1531 KB) - SIMPLIS Model
Modelo de simulación

TPS628303B SIMPLIS Encrypted Transient and Average Model

SLVME31.ZIP (2345 KB) - SIMPLIS Model
Archivo Gerber

TPS628303ARZEREVM Gerber Files

SLVC849.ZIP (1670 KB)
Archivo Gerber

TPS628303xDRLEVM Gerber Files

SLVC850.ZIP (1670 KB)
Paquete Pasadores Descargar
SOT-5X3 (DRL) 8 Ver opciones
WQFN-HR (RZE) 8 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos