Inicio Administración de potencia Reguladores conmutados CC/CC Convertidores de CC/CC

TPS6287C50

ACTIVO

Convertidor buck en paralelo, 6 V y 50 A con I2C, telemetría, sinc. de frecuencia y detección remota

Detalles del producto

Rating Catalog Topology Buck, Multiphase, Step-Down Converter, Synchronous Buck Iout (max) (A) 50 Vin (max) (V) 6 Vin (min) (V) 2.8 Vout (max) (V) 1 Vout (min) (V) 0.4 Switch current limit (typ) (A) 66 Features Adaptive/dynamic voltage scaling, Adjustable soft start, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, I2C control, I2C interface, I2C support, Light Load Efficiency, Multiphase, Output discharge, Over Current Protection, Phase interleaving, Power good, Soft Start, Soft Start Adjustable, Soft-start adjustable, Spread Spectrum Clocking (SSC), Synchronous Rectification, Telemetry, UVLO, Wettable flanks package EMI features Frequency Dithering, Low parasitic Hotrod packaging, Spread Spectrum Control mode COT, Constant on-time (COT), DCS-Control Operating temperature range (°C) 150 to -40 Duty cycle (max) (%) 65
Rating Catalog Topology Buck, Multiphase, Step-Down Converter, Synchronous Buck Iout (max) (A) 50 Vin (max) (V) 6 Vin (min) (V) 2.8 Vout (max) (V) 1 Vout (min) (V) 0.4 Switch current limit (typ) (A) 66 Features Adaptive/dynamic voltage scaling, Adjustable soft start, Differential Remote Sense, Enable, Fixed Output, Forced PWM, Frequency synchronization, I2C, I2C control, I2C interface, I2C support, Light Load Efficiency, Multiphase, Output discharge, Over Current Protection, Phase interleaving, Power good, Soft Start, Soft Start Adjustable, Soft-start adjustable, Spread Spectrum Clocking (SSC), Synchronous Rectification, Telemetry, UVLO, Wettable flanks package EMI features Frequency Dithering, Low parasitic Hotrod packaging, Spread Spectrum Control mode COT, Constant on-time (COT), DCS-Control Operating temperature range (°C) 150 to -40 Duty cycle (max) (%) 65
WQFN-FCRLF (VAA) 20 30 mm² 5 x 6
  • Input voltage range: 2.8V to 6V
  • Output voltage accuracy: ±0.5%
  • Output voltage range from 0.4V to 1.0V
  • Internal power MOSFETs: 1.8mΩ and 0.7mΩ
  • External compensation
  • Optional stacked operation for increased output current capability
  • Adjustable switching frequency from 833kHz to 3MHz
  • External synchronization
  • Forced PWM or power save mode operation
  • Optimized load transient operation
  • Fixed frequency DCS-Control
  • Transient non-synchronous mode
  • Adjustable droop compensation
  • Optimized for small and low-profile inductors
  • I2C-compatible interface with up to 3.4MHz
  • Differential remote sense
  • Thermal pre-warning and thermal shutdown
  • Input and output overvoltage protection
  • Output discharge
  • Optional spread spectrum clocking
  • Telemetry for VIN, Temp, VOUT, and IOUT
  • Interrupt output
  • Power-good output with window comparator with adjustable thresholds
  • Available in 5.0mm × 6.0mm, VQFN package
  • Input voltage range: 2.8V to 6V
  • Output voltage accuracy: ±0.5%
  • Output voltage range from 0.4V to 1.0V
  • Internal power MOSFETs: 1.8mΩ and 0.7mΩ
  • External compensation
  • Optional stacked operation for increased output current capability
  • Adjustable switching frequency from 833kHz to 3MHz
  • External synchronization
  • Forced PWM or power save mode operation
  • Optimized load transient operation
  • Fixed frequency DCS-Control
  • Transient non-synchronous mode
  • Adjustable droop compensation
  • Optimized for small and low-profile inductors
  • I2C-compatible interface with up to 3.4MHz
  • Differential remote sense
  • Thermal pre-warning and thermal shutdown
  • Input and output overvoltage protection
  • Output discharge
  • Optional spread spectrum clocking
  • Telemetry for VIN, Temp, VOUT, and IOUT
  • Interrupt output
  • Power-good output with window comparator with adjustable thresholds
  • Available in 5.0mm × 6.0mm, VQFN package

The TPS6287Cxx devices are a family of pin-to-pin, up to 50A synchronous step-down DC/DC converters with I2C interface and differential remote sense. Low-resistance power switches allow up to 50A continuous output current at high ambient temperatures. The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices. In stacked operation, the converters frequencies are synchronized, share a common compensation signal and shift the phases to supply loads with several hundreds of amperes. The TPS6287Cxx family implements a fixed-frequency-DCS-Control scheme with adjustable switching frequency and adjustable loop compensation. The high switching frequency and loop bandwidth is optimized for low-profile- and small-size inductors and low output capacitance. Devices can operate in power-save mode (PSM) for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple. The I2C compatible interface offers several control, monitoring, and warning features including telemetry data of input voltage, output voltage, output current, and temperature. Four SET pins can be used to program default settings before start-up.

The TPS6287Cxx devices are a family of pin-to-pin, up to 50A synchronous step-down DC/DC converters with I2C interface and differential remote sense. Low-resistance power switches allow up to 50A continuous output current at high ambient temperatures. The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices. In stacked operation, the converters frequencies are synchronized, share a common compensation signal and shift the phases to supply loads with several hundreds of amperes. The TPS6287Cxx family implements a fixed-frequency-DCS-Control scheme with adjustable switching frequency and adjustable loop compensation. The high switching frequency and loop bandwidth is optimized for low-profile- and small-size inductors and low output capacitance. Devices can operate in power-save mode (PSM) for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple. The I2C compatible interface offers several control, monitoring, and warning features including telemetry data of input voltage, output voltage, output current, and temperature. Four SET pins can be used to program default settings before start-up.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Documentación principal Tipo Título Opciones de formato Fecha
* Data sheet TPS6287Cxx 2.8V to 6V Input, up to 50A, Stackable Step-Down Converters With I²C Interface and Telemetry datasheet PDF | HTML 25 mar 2026

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS62893EVM-012 — Módulo de evaluación de convertidor reductor TPS62893

El TPS62893EVM-012 está diseñado para ayudar al usuario a evaluar y probar el funcionamiento y la funcionalidad de los convertidores buck TPS62893. El módulo de evaluación (EVM) también se puede utilizar para evaluar los dispositivos TPS62891-Q1 y TPS62892-Q1 en esta configuración. La EVM (...)
Guía del usuario: PDF | HTML
Placa de evaluación

TPS62893EVM-013 — Módulo de evaluación TPS62893

El TPS62893EVM-013 está diseñado para ayudar al usuario a evaluar y probar con facilidad el funcionamiento y la funcionalidad de los convertidores buck TPS62893. El EVM también se puede utilizar para evaluar los dispositivos TPS62891-Q1 y TPS62892-Q1 en esta configuración. La EVM convierte una (...)
Guía del usuario: PDF | HTML
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN-FCRLF (VAA) 20 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL)/reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos