Inicio Gestión de la energía Reguladores lineales y de baja salida (LDO)

TPS7A44

ACTIVO

Regulador de tensión lineal LDO de 50 mA, 65 V e IQ baja, con buena potencia y carril de salida medi

Detalles del producto

Output options Adjustable Output, Fixed Output Iout (max) (A) 0.05 Vin (max) (V) 65 Vin (min) (V) 4 Vout (max) (V) 14.5 Vout (min) (V) 1.24 Fixed output options (V) 3.3, 5 Noise (µVrms) 115 Iq (typ) (mA) 0.0055 Thermal resistance θJA (°C/W) 53.7 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Power good Accuracy (%) 1 PSRR at 100 KHz (dB) 75 Dropout voltage (Vdo) (typ) (mV) 600 Operating temperature range (°C) -40 to 125
Output options Adjustable Output, Fixed Output Iout (max) (A) 0.05 Vin (max) (V) 65 Vin (min) (V) 4 Vout (max) (V) 14.5 Vout (min) (V) 1.24 Fixed output options (V) 3.3, 5 Noise (µVrms) 115 Iq (typ) (mA) 0.0055 Thermal resistance θJA (°C/W) 53.7 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Power good Accuracy (%) 1 PSRR at 100 KHz (dB) 75 Dropout voltage (Vdo) (typ) (mV) 600 Operating temperature range (°C) -40 to 125
HVSSOP (DGQ) 10 14.7 mm² 3 x 4.9
  • Input voltage: 4 V to 65 V
  • Wide output (OUT) voltage range:
    • Adjustable: 1.24 V to 14.5 V
    • Fixed: 1.25 V to 5.0 V
  • Selectable intermediate output (MID_OUT):
    • 10 V, 12 V, 15 V
  • Maximum output current:
    • 50 mA (shared between OUT and MID_OUT)
  • 1% accuracy over temperature
  • Ultra-low IQ: 5.5 µA
  • Precision enable
  • Power-good (PG) output (open drain)
  • Thermal shutdown and overcurrent protection
  • Operating junction temperature: –40°C to +125°C
  • Package: HVSSOP-10 (RθJA = 53.7°C/W)
  • Input voltage: 4 V to 65 V
  • Wide output (OUT) voltage range:
    • Adjustable: 1.24 V to 14.5 V
    • Fixed: 1.25 V to 5.0 V
  • Selectable intermediate output (MID_OUT):
    • 10 V, 12 V, 15 V
  • Maximum output current:
    • 50 mA (shared between OUT and MID_OUT)
  • 1% accuracy over temperature
  • Ultra-low IQ: 5.5 µA
  • Precision enable
  • Power-good (PG) output (open drain)
  • Thermal shutdown and overcurrent protection
  • Operating junction temperature: –40°C to +125°C
  • Package: HVSSOP-10 (RθJA = 53.7°C/W)

The TPS7A44 low-dropout (LDO) linear voltage regulator introduces a combination of a 4-V to 65-V input voltage range with very-low quiescent current.

This device can support a wide range of input voltages (for example, a 15-s battery and 24-V to 48-V line power) and withstand line transient voltages up to 85 V. These features help modern applications meet increasingly stringent energy requirements, and help extend battery life in portable-power solutions.

The TPS7A44 output (OUT) is available in both fixed and adjustable output versions, which can regulate from 1.24 V to 14.5 V at 1% accuracy. The device also provides a second intermediate output (MID_OUT) that can be set to 10 V, 12 V, and 15 V using the MVSEL pins and can be used to bias gate drivers in place of a discrete regulator.

The TPS7A44 features a precision enable input that helps enable or disable the LDO at a fixed and accurate threshold voltage using a resistor divider from the input.

The power-good (PG) output is used to monitor the voltage at the feedback pin to indicate the status of the output voltage. The EN input and PG output can be used for sequencing multiple power sources in the system.

The TPS7A44 low-dropout (LDO) linear voltage regulator introduces a combination of a 4-V to 65-V input voltage range with very-low quiescent current.

This device can support a wide range of input voltages (for example, a 15-s battery and 24-V to 48-V line power) and withstand line transient voltages up to 85 V. These features help modern applications meet increasingly stringent energy requirements, and help extend battery life in portable-power solutions.

The TPS7A44 output (OUT) is available in both fixed and adjustable output versions, which can regulate from 1.24 V to 14.5 V at 1% accuracy. The device also provides a second intermediate output (MID_OUT) that can be set to 10 V, 12 V, and 15 V using the MVSEL pins and can be used to bias gate drivers in place of a discrete regulator.

The TPS7A44 features a precision enable input that helps enable or disable the LDO at a fixed and accurate threshold voltage using a resistor divider from the input.

The power-good (PG) output is used to monitor the voltage at the feedback pin to indicate the status of the output voltage. The EN input and PG output can be used for sequencing multiple power sources in the system.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
LM2936 ACTIVO Regulador de tensión de caída baja de 50 mA y 60 V, IQ baja, con protección de tensión inversa Higher PSRR, better accuracy, and better IQ
TPS7A16 ACTIVO Regulador de tensión de caída baja (LDO) de 100 mA, 60 V e IQ ultrabaja, con buena potencia y activa Higher PSRR, better accuracy and similar package.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 2
Tipo Título Fecha
* Data sheet TPS7A44 50-mA, 65-V, Low IQ, Low-Dropout Linear Voltage Regulator With Power-Good and Selectable Mid-Output Rail datasheet PDF | HTML 19 nov 2021
EVM User's guide TPS7A43EVM-047 EVM User's Guide 23 oct 2020

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS7A43EVM-047 — Regulador de tensión LDO TPS7A43 doble de 50 mA, 85 V e IQ ultrabaja con módulo de evaluación de

El módulo de evaluación (EVM) TPS7A43EVM-047 es una plataforma para evaluar el funcionamiento y el rendimiento del regulador lineal TPS7A43. Esta configuración del EVM contiene un único regulador de tensión de 50 mA, alta tensión y corriente quiescente baja (IQ), salida doble y caída baja (LDO) (...)

Guía del usuario: PDF
Modelo de simulación

TPS7A44 PSpice Transient Model (3.3 V)

SBVM983.ZIP (50 KB) - PSpice Model
Modelo de simulación

TPS7A44 PSpice Transient Model (5 V)

SBVM982.ZIP (55 KB) - PSpice Model
Paquete Pasadores Descargar
HVSSOP (DGQ) 10 Ver opciones

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos