Inicio Administración de potencia Reguladores de conmutación CA/CC Controladores de CA/CC

UCC2805

ACTIVO

PWM 12 V, 1 A, 1 MHz, modo de corriente BiCMOS de baja potencia, UVLO 4.1 V/3.6 V, ciclo de trabajo

Detalles del producto

Topology Boost, Flyback, Forward Control mode Current Features Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Fixed frequency, Leading edge blanking, Multi-topology, Soft start Duty cycle (max) (%) 50
Topology Boost, Flyback, Forward Control mode Current Features Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Fixed frequency, Leading edge blanking, Multi-topology, Soft start Duty cycle (max) (%) 50
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm) TSSOP (PW) 8 19.2 mm² (3 mm × 6.4 mm)
  • 100µA typical starting supply current
  • 500µA typical operating supply current
  • Operation up to 1MHz
  • Internal soft start
  • Internal fault soft start
  • Internal leading-edge blanking of the current sense signal
  • 1A totem-pole output
  • 70ns typical response from current-sense to gate drive output
  • 1.5% tolerance voltage reference
  • Same pinout as UC3842 and UC3842A
  • 100µA typical starting supply current
  • 500µA typical operating supply current
  • Operation up to 1MHz
  • Internal soft start
  • Internal fault soft start
  • Internal leading-edge blanking of the current sense signal
  • 1A totem-pole output
  • 70ns typical response from current-sense to gate drive output
  • 1.5% tolerance voltage reference
  • Same pinout as UC3842 and UC3842A

The UCC280x family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and DC-to-DC fixed frequency current-mode switching mode power supplies with minimal parts count.

These devices have the same pin configuration as the UCx84x family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC280x family offers a variety of package options, temperature range options, choice of maximum duty cycle, and choice of critical voltage levels. Lower reference parts such as the UCC2803 and UCC2805 fit best into battery-operated systems, while the higher reference and higher UVLO hysteresis of the UCC2802 and UCC2804 make these ideal choices for use in off-line power supplies.

The UCC280x series is specified for operation from –40°C to 125°C.

The UCC280x family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and DC-to-DC fixed frequency current-mode switching mode power supplies with minimal parts count.

These devices have the same pin configuration as the UCx84x family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC280x family offers a variety of package options, temperature range options, choice of maximum duty cycle, and choice of critical voltage levels. Lower reference parts such as the UCC2803 and UCC2805 fit best into battery-operated systems, while the higher reference and higher UVLO hysteresis of the UCC2802 and UCC2804 make these ideal choices for use in off-line power supplies.

The UCC280x series is specified for operation from –40°C to 125°C.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 16
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos UCC280x Low-Power BiCMOS Current-Mode PWM Controllers datasheet (Rev. H) PDF | HTML 25/04/2025
Nota sobre la aplicación Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps (Rev. A) PDF | HTML 11/06/2021
Nota sobre la aplicación Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) 12/03/2019
Guía de selección Power Management Guide 2018 (Rev. R) 25/06/2018
Nota sobre la aplicación UCC38C42 Family of High-Speed BiCMOS Current-Mode PWM Controllers 7/02/2002
Nota sobre la aplicación Differences Between the UCC3813 and the UCC3800 PWM Families 2/06/2000
Nota sobre la aplicación DN-65 Considerations in Powering BiCMOS ICs 5/09/1999
Nota sobre la aplicación DN-42A Design Considerations for Transitioning from UC3842 to the New UCC3802 5/09/1999
Nota sobre la aplicación DN-54 Innovative Buck Regulator Uses High Side N-Channel Switch Without Complex 5/09/1999
Nota sobre la aplicación DN-43 Simple Techniques to Generate a Negative Voltage Bias Supply 5/09/1999
Nota sobre la aplicación U-111, Practical Considerations in Current Mode Power Supplies 5/09/1999
Nota sobre la aplicación DN-56A, Single Switch Flyback Circuit Converts + 5 V to +/- 12 V for RS-232/422 5/09/1999
Nota sobre la aplicación DN-30 Programmable Electronic Circuit Breaker 5/09/1999
Nota sobre la aplicación DN-48 Versatile Low Power SEPIC Converter Accepts Wide Input Voltage Range 5/09/1999
Nota sobre la aplicación DN-46 Highly Efficient Low Power DC to DC Inverter Converts +5V Input to -3V Out 5/09/1999
Nota sobre la aplicación U-133A UCC3800/1/2/3/4/5 BiCMOS Current Mode Control IC's 5/09/1999

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Modelo de simulación

UCCX805 & UCCX813-5 TINA-TI Startup Reference Design

SLUM231.TSC (667 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

UCCX805 & UCCX813-5 TINA-TI Steady State Reference Design

SLUM230.TSC (668 KB) - Diseño de referencia TINA-TI
Productos y hardware compatibles
Modelo de simulación

UCCX805 & UCCX813-5 TINA-TI Transient Spice Model

SLUM229.ZIP (28 KB) - Modelo TINA-TI Spice
Productos y hardware compatibles
Modelo de simulación

UCCx805 & UCCx813-5 Unencrypted PSpice Transient Model

SLUM516.ZIP (6 KB) - Modelo PSpice
Productos y hardware compatibles
Modelo de simulación

UCCx805, UCCx813-5 Families PSpice Transient Model (Rev. B)

SLUM081A (88 KB) - Modelo PSpice
Productos y hardware compatibles
Diseño de referencia

PMP20852 — Diseño de referencia de convertidor Flyback de triple salida aislado de 3 W

El PMP20852 es un diseño de referencia de convertidor Flyback aislado con regulación del lado principal mediante el circuito integrado del controlador UCC2805. Hay tres salidas aisladas de forma independiente en el lado secundario, cada una de las cuales utiliza reguladores lineales LP2951 para (...)
Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOIC (D) 8 Ultra Librarian
TSSOP (PW) 8 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos