Inicio Administración de potencia Reguladores de conmutación CA/CC Controladores de CA/CC

UCC28742

ACTIVO

Controlador de retorno de alta eficiencia con una precisión de regulación de salida del 1 %

Detalles del producto

Topology Flyback Control mode Secondary-side regulation Features Current limiting, DCM, Light load efficiency, Overcurrent protection, Overvoltage protection, Quasi-Resonant, Secondary-side regulated, Soft start, USB C/PD compatible, Valley switching Duty cycle (max) (%) 99
Topology Flyback Control mode Secondary-side regulation Features Current limiting, DCM, Light load efficiency, Overcurrent protection, Overvoltage protection, Quasi-Resonant, Secondary-side regulated, Soft start, USB C/PD compatible, Valley switching Duty cycle (max) (%) 99
SOT-23 (DBV) 6 8.12 mm² (2.9 mm × 2.8 mm)
  • Opto-Coupled Feedback Enables up to 1% Regulation
  • Accurate Current Limit with Overload Timeout Protection and Delayed Hiccup Response
  • Resonant-Ring Valley-Switching Operation for Highest Overall Efficiency
  • 80-kHz Maximum Switching Frequency
  • Frequency Dithering to Ease EMI Compliance
  • Clamped Gate-Drive Output for MOSFET
  • Ultra-Low Start-Up Current and Large VDD Hysteresis
    • High Value Start-Up Resistor
    • Low Bias Capacitance
  • Fault Protections
    • Input Low Line
    • Output Over-Voltage
    • Over-Current
    • Short-Circuit
  • SOT23-6 Package
  • Create a Custom Design Using the UCC28742 with the WEBENCH® Power Designer
  • Opto-Coupled Feedback Enables up to 1% Regulation
  • Accurate Current Limit with Overload Timeout Protection and Delayed Hiccup Response
  • Resonant-Ring Valley-Switching Operation for Highest Overall Efficiency
  • 80-kHz Maximum Switching Frequency
  • Frequency Dithering to Ease EMI Compliance
  • Clamped Gate-Drive Output for MOSFET
  • Ultra-Low Start-Up Current and Large VDD Hysteresis
    • High Value Start-Up Resistor
    • Low Bias Capacitance
  • Fault Protections
    • Input Low Line
    • Output Over-Voltage
    • Over-Current
    • Short-Circuit
  • SOT23-6 Package
  • Create a Custom Design Using the UCC28742 with the WEBENCH® Power Designer

The UCC28742 off-line flyback controller is a highly integrated, 6-pin secondary-side regulated PWM controller for efficient AC-to-DC power supplies. It is an isolated-flyback power-supply controller that provides Constant-Voltage (CV) using an optical coupler to improve transient response to large-load steps. This device processes information from opto-coupled feedback and an auxiliary flyback winding for high-performance control of output voltage and current.

The UCC28742 employs advanced control algorithms to achieve high operating efficiency and performance. The drive output interfaces to a MOSFET power switch. Discontinuous conduction mode (DCM) with valley-switching reduces switching losses. Modulation of switching frequency and primary current-peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controller has a maximum switching frequency of 80 kHz and always maintains control of the peak-primary current in the transformer. A minimum switching frequency of 200 Hz facilitates the achievement of low no-load input power.

The UCC28742 off-line flyback controller is a highly integrated, 6-pin secondary-side regulated PWM controller for efficient AC-to-DC power supplies. It is an isolated-flyback power-supply controller that provides Constant-Voltage (CV) using an optical coupler to improve transient response to large-load steps. This device processes information from opto-coupled feedback and an auxiliary flyback winding for high-performance control of output voltage and current.

The UCC28742 employs advanced control algorithms to achieve high operating efficiency and performance. The drive output interfaces to a MOSFET power switch. Discontinuous conduction mode (DCM) with valley-switching reduces switching losses. Modulation of switching frequency and primary current-peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controller has a maximum switching frequency of 80 kHz and always maintains control of the peak-primary current in the transformer. A minimum switching frequency of 200 Hz facilitates the achievement of low no-load input power.

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
UCC28750 ACTIVO Controlador flyback en modo actual con regulación del lado secundario (SSR) para aplicaciones fuera Same functionality with different pin-out to the compared device

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 9
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos UCC28742 High-Efficiency Flyback Controller with Optocoupler Feedback datasheet (Rev. A) PDF | HTML 8/05/2018
Artículo técnico Snubbing the flyback converter PDF | HTML 26/02/2024
Artículo técnico Adding a single capacitor to improve cross-regulation in dual-output flyback power supplies PDF | HTML 21/12/2023
Application brief Flyback Selection Guide PDF | HTML 23/06/2022
Nota sobre la aplicación Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips PDF | HTML 31/08/2021
Más documentación PCB layout guidelines to optimize power supply performance 23/03/2021
Nota sobre la aplicación Minimize Standby Consumption for UCC287XX Family 1/08/2019
Artículo técnico Choosing the right flyback controller for your design PDF | HTML 24/08/2018
Nota sobre la aplicación Selecting Electrolitic Bus Capacitor for Universal Input 17/07/2018

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

UCC28742EVM-001 — Módulo de evaluación UCC28742 de convertidor CA/CC de 10 W

El UCC28742EVM-001 es un módulo de evaluación de 10 W para evaluar un adaptador fuera de línea para aplicaciones USB. El EVM cumple con los requisitos de eficiencia y energía de reserva de nivel 2 de CoC y nivel 6 de DoE. Está destinado a fines de evaluación y no pretende ser un producto final. El (...)

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Modelo de simulación

UCC28742 SIMPLIS Model (Rev. A)

SLUJ001A.ZIP (840 KB) - Modelo SIMPLIS
Productos y hardware compatibles
Herramienta de cálculo

SLUC652 — UCC28742 Design Calculator

Productos y hardware compatibles

Muchos diseños de referencia de TI incluyen UCC28742

Utilice nuestra herramienta de selección de diseños de referencia para revisar e identificar los diseños que mejor se adaptan a su aplicación y parámetros.

Encapsulado Pines Símbolos CAD, huellas y modelos 3D
SOT-23 (DBV) 6 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos