Se encuentra disponible una versión más nueva de este producto

open-in-new Comparar alternativas
Funcionalidad similar a la del dispositivo comparado
NUEVO CC3301MOD ACTIVO Módulo complementario SimpleLink™ Wi-Fi 6 y Bluetooth® baja energía Upgraded functionality with Wi-Fi 6 and Bluetooth Low Energy

Detalles del producto

CPU External MPU Type Module, Transceiver Technology Wi-Fi Protocols Wi-Fi 2.4 GHz Operating system Linux Certifications CE, FCC, ISED, MIC Throughput UDP (max) (Mbps) 100 Features 802.11bgn, AP, Mesh over Wi-Fi based on 802.11s, STA, Wi-Fi direct mode Edge AI enabled No Security Secure communication Rating Catalog Operating temperature range (°C) -20 to 70
CPU External MPU Type Module, Transceiver Technology Wi-Fi Protocols Wi-Fi 2.4 GHz Operating system Linux Certifications CE, FCC, ISED, MIC Throughput UDP (max) (Mbps) 100 Features 802.11bgn, AP, Mesh over Wi-Fi based on 802.11s, STA, Wi-Fi direct mode Edge AI enabled No Security Secure communication Rating Catalog Operating temperature range (°C) -20 to 70
QFM (MOC) 100 178.22 mm² (13.3 mm × 13.4 mm)
  • General
    • Integrates RF, power amplifiers (PAs), clocks, RF switches, filters, passives, and power management
    • Quick hardware design with TI module collateral and reference designs
    • Operating temperature: –20°C to +70°C
    • Small form factor: 13.3mm × 13.4mm × 2mm
    • 100-pin MOC package
    • FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas
  • Wi-Fi
    • WLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n
    • 20MHz and 40MHz SISO and 20MHz 2 × 2 MIMO at 2.4GHz for high throughput: 80Mbps (TCP), 100Mbps (UDP)
    • 2.4GHz MRC support for extended range
    • Fully calibrated: Production calibration is not required
    • 4-bit SDIO host interface support
    • Wi-Fi direct concurrent operation (multichannel, multirole)
  • Bluetooth and Bluetooth Low Energy: WL183xMOD only
    • Bluetooth 5.1 secure connection compliant and CSA2 support; declaration ID: D032799
    • Host controller interface (HCI) transport for Bluetooth over UART
    • Dedicated audio processor support of SBC encoding + A2DP
    • Dual-mode Bluetooth and Bluetooth Low Energy
    • TI’s Bluetooth and Bluetooth Low Energy certified stack
  • Key benefits
    • Reduces design overhead
    • Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)
    • Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna
    • Different provisioning methods for in-home devices’ connectivity to Wi-Fi in one step
    • Lowest Wi-Fi power consumption in connected idle (< 800µA)
    • Configurable wake on WLAN filters to only wake up the system
    • Wi-Fi and Bluetooth single antenna coexistence
  • General
    • Integrates RF, power amplifiers (PAs), clocks, RF switches, filters, passives, and power management
    • Quick hardware design with TI module collateral and reference designs
    • Operating temperature: –20°C to +70°C
    • Small form factor: 13.3mm × 13.4mm × 2mm
    • 100-pin MOC package
    • FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas
  • Wi-Fi
    • WLAN baseband processor and RF transceiver support of IEEE Std 802.11b, 802.11g, and 802.11n
    • 20MHz and 40MHz SISO and 20MHz 2 × 2 MIMO at 2.4GHz for high throughput: 80Mbps (TCP), 100Mbps (UDP)
    • 2.4GHz MRC support for extended range
    • Fully calibrated: Production calibration is not required
    • 4-bit SDIO host interface support
    • Wi-Fi direct concurrent operation (multichannel, multirole)
  • Bluetooth and Bluetooth Low Energy: WL183xMOD only
    • Bluetooth 5.1 secure connection compliant and CSA2 support; declaration ID: D032799
    • Host controller interface (HCI) transport for Bluetooth over UART
    • Dedicated audio processor support of SBC encoding + A2DP
    • Dual-mode Bluetooth and Bluetooth Low Energy
    • TI’s Bluetooth and Bluetooth Low Energy certified stack
  • Key benefits
    • Reduces design overhead
    • Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)
    • Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna
    • Different provisioning methods for in-home devices’ connectivity to Wi-Fi in one step
    • Lowest Wi-Fi power consumption in connected idle (< 800µA)
    • Configurable wake on WLAN filters to only wake up the system
    • Wi-Fi and Bluetooth single antenna coexistence

The certified WiLink™ 8 module from TI offers a high throughput and extended range along with Wi-Fi® and Bluetooth® coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4GHz module, a two-antenna system. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which include QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.

The certified WiLink™ 8 module from TI offers a high throughput and extended range along with Wi-Fi® and Bluetooth® coexistence (WL1835MOD only) in a power-optimized design. The WL18x5MOD device is a 2.4GHz module, a two-antenna system. The device is FCC, IC, ETSI/CE, and TELEC certified for AP and client. TI offers drivers for high-level operating systems such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which include QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.

Descargar Ver vídeo con transcripción Video

Documentación técnica

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 32
Documentación principal Tipo Título Opciones de formato Descargar la versión más reciente en inglés Fecha
* Hoja de datos WL18x1MOD, WL18x5MOD WiLink™ 8 Single-Band Combo Module – Wi-Fi® , Bluetooth® , and Bluetooth Low Energy (LE) datasheet (Rev. O) PDF | HTML 6/01/2026
* Informe de radiación y confiabilidad WL1801MOD Reliability Data - Reliability Estimate 27/07/2017
Nota sobre la aplicación CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices (Rev. A) PDF | HTML 20/10/2022
Nota sobre la aplicación Antenna Impedance Measurement and Matching PDF | HTML 22/03/2022
Guía del usuario WiLink8 Getting Started Guide (Rev. B) PDF | HTML 20/12/2021
Guía del usuario WL1835MODCOM8 WLAN MIMO/BT Module Board (Rev. F) PDF | HTML 17/12/2021
Asesoramiento en ciberseguridad Bluetooth® Low Energy, Basic/Enhanced Data Rate–PIN-Code Pairing Key Derivation 27/05/2021
Asesoramiento en ciberseguridad FragAttacks - FRagmentation and AGgregation Attacks (Rev. A) 19/05/2021
Certificado WL18MODGB (Test Grade 01: WL18MODGBMOC) EC DoC (Rev. A) 3/03/2021
Informe WiLink8 Use Case Guide PDF | HTML 30/12/2020
Guía del usuario WiLink8 Linux Advanced Demos PDF | HTML 7/12/2020
Guía del usuario WiLink8 Driver Debug PDF | HTML 7/12/2020
Guía del usuario WiLink8 R8.8 Linux Wi-Fi Driver Release Build User's Guide (Rev. A) PDF | HTML 27/10/2020
Product overview Sitara™ processors + WiLink™ 8 Wi-Fi® + Bluetooth® combo connectivity (Rev. A) 30/07/2019
Guía del usuario WL18xx Module Hardware Integration Guide (Rev. B) PDF | HTML 9/07/2019
Guía de diseño WL18xx Design Checklist 27/06/2019
Más documentación Streamline the challenges of RF design with certified wireless modules 25/01/2017
Nota sobre la aplicación Certification Testing Guidelines for WFA System Interoperability Test Plans MCP 28/12/2016
Nota sobre la aplicación Certification Testing Guidelines for WFA System Interoperability Test Plans NLCP 28/12/2016
Nota sobre la aplicación WiLink 8.0TM WLAN IP Mesh Application Report 1/06/2016
Guía del usuario WiLinkT™ 8 WLAN Features User's Guide (Rev. A) PDF | HTML 26/05/2016
Informe Wi-Fi® mesh networks: Discover new wireless paths 24/05/2016
Informe Streaming Audio: Follow the signal chain white paper 14/04/2016
Nota sobre la aplicación Certification Testing Guidelines for WFA System Interoperability Test Plans 15/02/2016
Más documentación WiLink 8 Wi-Fi + Bluetooth/BLE Modules (Rev. B) 3/02/2016
Nota sobre la aplicación Precise Time Synchronization Over WLAN (Rev. A) 18/12/2015
Nota sobre la aplicación WL18xx .INI File (Rev. A) 3/12/2015
Informe Wi-Fi® audio: capabilities and challenges 2/12/2015
Nota sobre la aplicación WL18xx Level-shifting I/O (Rev. A) 19/08/2015
Nota sobre la aplicación WiLink 8 Solutions WiLink8 - wlconf Manual 1/07/2015
Informe Complete solutions for next-generation wireless connected audio 2/01/2014
Informe A Smarter Grid With The Internet of Things 21/10/2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TMDSEVM437X — Módulo de evaluación AM437x

El módulo de evaluación (EVM) AM437x, TMDXEVM437X, permite a los desarrolladores comenzar inmediatamente a evaluar la familia de procesadores AM437x (AM4372, AM4376,AM4377, AM4378) y comenzar a crear aplicaciones y acelerar el desarrollo para aplicaciones interfaz hombre-máquina (HMI), industriales (...)

Guía del usuario: PDF
Productos y hardware compatibles
Placa de evaluación

TMDXEVM3358 — Módulo de evaluación AM335x

The AM335x Evaluation Module (EVM) enables developers to immediately start evaluating the AM335x processor family (AM3351, AM3352, AM3354, AM3356, AM3358) and begin building applications for factory automation, building automation, grid infrastructure, and more.

Guía del usuario: PDF
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Placa de evaluación

WL18XXCOM82SDMMC — WL18XXCOM82SDMMC

The WiLink SDIO board is a SDMMC adapter board and is an easy to use connector between a WiLink COM8 Evaluation module [WL1837MODCOM8i and WL1835MODCOM8B] and a generic SD/MMC card slot on a host processor EVM. The adapter card enables the WiLink Wi-Fi module to operate over SDIO. It also provides (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Tarjeta secundaria

WL1835MODCOM8B — Módulo de evaluación de WILink™ 8 WiFi® de 2.4 GHz + Bluetooth® COM8

TI WiLink™ 8 module family

The WL1835MODCOM8 is one of the two evaluation boards for the TI WiLink 8 combo module family. For designs requiring performance in the 5 GHz band and extended temperature range, see the WL1837MODCOM8I.

The WL1835MODCOM8 Kit for Sitara EVMs easily enables customers to add (...)

Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Tarjeta secundaria

WL1837MODCOM8I — Módulo de evaluación de WILink™ 8 WiFi® de banda doble, 2.4 GHz y 5 GHz + Bluetooth® COM8

TI WiLink™ 8 module family The WL1837MODCOM8I is one of the two evaluation boards for the TI WiLink™ 8 combo module family. For designs requiring performance in the 2.4 GHz band only, see the WL1835MODCOM8.

The WL1837MODCOM8I, which is compatible with many processors including TI’s (...)

Guía del usuario: PDF | HTML
Productos y hardware compatibles
En inventario
Límite:
??asset.out-of-stock-ti_es_MX??
No disponible
Kit de desarrollo de software (SDK)

PROCESSOR-SDK-AM335X — SDK de procesador para procesadores AM335x Sitara: Compatibilidad con Linux y TI-RTOS

Processor SDK (Software Development Kit) is a unified software platform for TI embedded processors providing easy setup and fast out-of-the-box access to benchmarks and demos.  All releases of Processor SDK are consistent across TI’s broad portfolio, allowing developers to seamlessly (...)

Productos y hardware compatibles
Software de aplicación y estructura

WILINK-BT_WIFI-WIRELESS_TOOLS — Herramientas inalámbricas WiLink™ para módulos WL18XX

Este encapsulado incluye las siguientes aplicaciones:

  • Herramienta de ajuste en tiempo real WLAN (RTTT)
  • Registrador de Bluetooth®
  • WLAN gLogger
  • Monitor de calidad de enlace (LQM)
  • Herramienta HCITester
    • BTSout
    • BTSTransform
    • ScriptPad

Las aplicaciones proporcionan todas las capacidades necesarias para depurar y (...)

lock = Requiere aprobación de exportación (1 minuto)
Productos y hardware compatibles
Software de aplicación y estructura

WILINK-WIFI_MESH_VISUALIZATION_TOOL — Herramientas de visualización de malla de WILink™ para módulos WL18XX

Wireless Mesh Explorer is a Microsoft® Windows® based software tool for exploring and displaying mesh networks based on the Texas Instruments WiLink8.0 chipset.
lock = Requiere aprobación de exportación (1 minuto)
Productos y hardware compatibles
Controlador o biblioteca

WILINK8-WIFI-MCP8 — Controlador Wi-Fi patentado 8 de WILink™: Línea base QNX, WinCE, Nucleus RTOS

El encapsulado MCP contiene el encapsulado de instalación, el objeto precompilado y el código fuente del controlador Wi-Fi propietario: QNX, Nucleus, WinCE, así como la imagen de referencia ThreadX, FreeRTOS, µC, MQX, RTX y uITRON RTOS para integrar fácilmente los controladores Wi-Fi WiLink de TI. (...)

lock = Requiere aprobación de exportación (1 minuto)
Productos y hardware compatibles
Controlador o biblioteca

WILINK8-WIFI-NLCP — WiLink8 NLCP Wi-Fi driver package for Linux OS

El encapsulado WiLink™ 8 NLCP consta de scripts de compilación para actualizar el controlador WiLink™ 8 Linux, el firmware binario, el wpa supplicant, el hostapd, etc. Para más detalles, consulte las notas de la versión y la guía del usuario

Descripción general del bloqueo de software:

El controlador (...)

Productos y hardware compatibles
Certificación

WL18XX-REPORTS — Reports: WL18XX Regulatory Certification Reports

¿Busca que el módulo WiLink™ 8 sea compatible con la certificación? WL18XX-CERTIFCATION proporciona la información relevante y el soporte para la certificación exitosa de su producto. En esta página encontrará los informes de certificación más recientes de nuestros módulos, así como de nuestras (...)
Productos y hardware compatibles
Herramienta de diseño

WILINK-DESIGN-REVIEWS — Revisiones de diseño de hardware para dispositivos WL18xx

Para comenzar con el proceso de revisión del diseño de hardware de WiLink™:

  • Paso 1: Antes de solicitar una revisión, es importante que revise la documentación técnica y los recursos de diseño y desarrollo disponibles en la página del producto correspondiente (consulte los enlaces de la página del (...)
Productos y hardware compatibles
Diseño de referencia

TIDC-WL1835MODCOM8B — Diseño de antena WiFi® de 2.4 GHz + Bluetooth® certificado en módulo 1835 WiLink™

The WiLink 1835 Module Antenna Design is a reference design that combines the functionalities of the WiLink 8 module with a built-in antenna on a single board, implementing the module in the way it's been certified. Through this, customers are able to evaluate the performance of the module through (...)

Productos y hardware compatibles
Diseño de referencia

TIDC-WL1837MOD-AUDIO-MULTIROOM-CAPE — Diseño de referencia de capa multihabitación de audio de TI WiLink™ 8 Wi-Fi®/Bluetooth®/Bluetooth de

The TI WiLink™ 8 WL1837MOD audio cape is a wireless multi-room audio reference design used with BeagleBone Black (featuring TI Sitara™ AM335x). The WiLink 8 device's WLAN capability to capture and register precise arrival time of the connected AP's beacon is used to achieve ultra-precise (...)

Productos y hardware compatibles
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
QFM (MOC) 100 Ultra Librarian

Pedidos y calidad

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene alguna pregunta sobre calidad, encapsulados o pedido de productos de TI, consulte el servicio de asistencia de TI. ​​​​​​​​​​​​​​

Videos