ADC08D1000
Key Specifications
Resolution | 8 Bits |
Max Conversion Rate | 1 GSPS (min) |
Bit Error Rate | 10 |
ENOB @ 500 MHz Input | 7.4 Bits (typ) |
DNL | ±0.15 LSB (typ) |
Power Consumption |
Operating | 1.6 W (typ) |
Power Down Mode | 3.5 mW (typ) |
The ADC08D1000 is a dual, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 1.3 GSPS. Consuming a typical 1.6 Watts at 1 GSPS from a single 1.9 Volt supply, this device is guaranteed to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.4 ENOB with a 500 MHz input signal and a 1 GHz sample rate while providing a 10
Each converter has a 1:2 demultiplexer that feeds two LVDS buses and reduces the output data rate on each bus to half the sampling rate. The two converters can be interleaved and used as a single 2 GSPS ADC.
The converter typically consumes less than 3.5 mW in the Power Down Mode and is available in a 128-lead, thermally enhanced exposed pad LQFP and operates over the Industrial (-40°C
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | ADC08D1000 High Performance, Low Power, Dual 8-Bit, 1 GSPS A/D Converter (jp) データシート (Rev. G 翻訳版) | 最新英語版 (Rev.I) | PDF | HTML | 2009年 4月 16日 | |
アプリケーション・ノート | 自動車/産業/軍用アプリケーションに適したLIDAR システムの開発 | 2006年 3月 24日 | ||||
アプリケーション・ノート | 高速信号とクロック、およびデータ・キャプチャを理解する | 英語版 | 2005年 10月 18日 | |||
ホワイト・ペーパー | Interleaving ADCs for Higher Sample Rates | 2005年 2月 1日 |
設計および開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
PSPICE-FOR-TI — TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
---|---|---|
HLQFP (NNB) | 128 | Ultra Librarian |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 使用原材料
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点