DLPA3005
- High-Efficiency, High-Current RGB LED Driver
- Drivers for External Buck FETs up to 16 A
- Drivers for External RGB Switches
- 10-Bit Programmable Current per Channel
- Inputs for Selecting Color-Sequential RGB LEDs
- Generation of DMD High Voltage Supplies
- Two High Efficiency Buck Converters to Generate the DLPC343x and DMD Supply
- Three High Efficiency, 8-Bit Programmable Buck Converters for FAN Driver Application or General Power Supply. General Purpose Buck2 (PWR6 currently supported, others may be available in the future)
- Two LDOs Supplying Auxiliary Voltages
- Analog MUX for Measuring internal and external nodes such as a thermistor and reference levels
- Monitoring/Protections: Thermal Shutdown, Hot Die, Low-Battery, and Undervoltage Lockout (UVLO)
The DLPA3005 is a highly-integrated power management IC optimized for DLP® Pico™ Projector systems. The DLPA3005 supports LED projectors up to 16 A per LED, enabled by an integrated high efficiency buck controller. Additionally, the drivers control the RGB switches, supporting the sequencing of R, G, and B LEDs. The DLPA3005 contains five buck converters, two of which are dedicated for DLPC low voltage supplies. Another dedicated regulating supply generates the three timing-critical DC supplies for the DMD: VBIAS, VRST, and VOFS.
The DLPA3005 contains several auxiliary blocks which can be used in a flexible way. This enables a tailor-made Pico Projector system. Three 8-bit programmable buck converters can be used, for instance, to drive rgb projector FANs or to make auxiliary supply lines. General Purpose Buck2 (PWR6) currently supported, others may be available in the future. Two LDOs can be used for a lower-current supply, up to 200 mA. These LDOs are pre-defined to 2.5 V and 3.3 V.
Through the SPI, all blocks of the DLPA3005 can be addressed. Features included are the generation of the system reset, power sequencing, input signals for sequentially selecting the active LED, IC self-protections, and an analog MUX for routing analog information to an external ADC.
技術資料
設計および開発
追加の事項や他のリソースを参照するには、以下のタイトルをクリックすると、詳細ページを表示できます。
DLP4710EVM-LC — DLP® 4710 ライト・コントロールの評価モジュール
DLPDLCR4710EVM-G2 — フル HD DLP4710 チップセットの評価モジュール
DLP® LightCrafter Display 4710 EVM-G2 は、フル HD の DLP4710 チップセット向けの使いやすいプラグ・アンド・プレイ形式の評価プラットフォームです。DLP4710 チップセットは、モバイル・プロジェクタ(バッテリ電源と AC 電源)、インタラクティブ・ディスプレイ、ヘッド・マウント・ディスプレイ(HMD)などのウェアラブル製品など、多様なディスプレイ・アプリケーションで使用されます。DLP4710 チップセットは、DLP4710(0.47 インチ 1080p)フル HD DMD、DLPC3439 ディスプレイ・コントローラ、DLPA3005 (...)
DLPDLCR471TPEVM — DLP® LightCrafter™ Display 471TP の評価基板
DLP® LightCrafter™ Display 471TP は、コンシューマや産業用の各市場に出回っているポータブル高解像度アプリケーションを想定した、使いやすいプラグ・アンド・プレイ形式の評価プラットフォームです。この評価基板 (EVM) が採用している DLP471TP チップセットは、0.47 インチの 4K デジタル・マイクロミラー・デバイス (DMD) である DLP471TP、HSSI ディスプレイ・コントローラである DLPC6540、および最小クラスのフォーム・ファクタと最小コストで 4K UHD の解像度を実現する PMIC/LED ドライバである DLPA3005 (...)
DLP-PICO-FW-SEL — DLP® Pico™ Firmware Selector
TIDA-080005 — 高速デスクトップ 3D 印刷向けフル HD DLP® サブシステムのリファレンス・デザイン
TIDA-01226 — DLP Pico 技術使用 小型フル HD 1080p(最大 16A)プロジェクション・ディスプレイのリファレンス・デザイン
TIDA-00722 — TI DLP® Pico™ プロジェクタ向けに MSP430 を使用するリアルタイム色管理のリファレンス・デザイン
TIDA-00576 — フル HD 1080p プロジェクション・ディスプレイ・リファレンス・デザイン、DLP Pico テクノロジーを採用
パッケージ | ピン数 | ダウンロード |
---|---|---|
HTQFP (PFD) | 100 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL rating / リフローピーク温度
- MTBF/FIT 推定値
- 原材料組成
- 認定試験結果
- 継続的な信頼性モニタ試験結果
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス・デザインが存在する可能性があります。