DRV8308
- Three-Phase Brushless DC Motor Controller
- Digital Closed-Loop Speed Control with Programmable Gain and Filters
- Drives 6 N-Channel MOSFETs With Configurable 10- to 130-mA Gate Drive
- Integrated Commutation from Hall Sensors
- Timing Can Be Advanced/Delayed
- 120° or 180°-Sinusoidal Current Control
- Single Input Controls Motor Speed
- Operating Supply Voltage 8.5 to 32 V
- Flexible Configuration Methods
- Read Internal Non-Volatile Memory
- Read External EEPROM
- Write SPI
- Configurable Motor Current Limiter
- 5-V Regulator for Hall Sensors
- Low-power Standby Mode
- Integrated Overcurrent, Overvoltage, and Overtemperature Protection
The DRV8308 controls sensored brushless DC motors with advanced features and a simple input interface. As a predriver, it drives the gates of 6 external N-Channel MOSFETs with a configurable current of 10mA to 130mA for optimal switching characteristics.
The 3 motor phases are commutated according to the Hall sensor inputs. Once the motor reaches a consistent speed, the DRV8308 uses just 1 Hall sensor to minimize jitter caused by sensor mismatch. The Hall signal-to-drive timing can be advanced or delayed in 0.1% increments to optimize power efficiency. An optional 180° commutation mode drives sinusoidal current through the motor and minimizes audible noise and torque ripple. Peak motor current can be controlled by sizing a sense resistor.
The DRV8308 achieves closed-loop speed control to spin motors to a precise RPM across a wide range of load torques. The system matches motor speed—generated from an FG trace or the Hall sensors—to the reference frequency on pin CLKIN. The DRV8308 can also drive motors open-loop using a duty cycle command, from either a clock or register setting.
An assortment of protection features bolster system robustness, as the DRV8308 handles and reports overcurrent, overvoltage, undervoltage, and overtemperature.
お客様が関心を持ちそうな類似品
比較対象デバイスと類似の機能
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | DRV8308 Brushless DC Motor Controller データシート (Rev. B) | PDF | HTML | 2017年 11月 13日 | ||
アプリケーション・ノート | モーター・ドライバ向け基板レイアウト事例 (Rev. B 翻訳版) | PDF | HTML | 英語版 (Rev.B) | PDF | HTML | 2021年 10月 14日 | |
アプリケーション・ノート | Hardware Design Considerations for an Electric Bicycle using BLDC Motor (Rev. B) | 2021年 6月 23日 | ||||
アプリケーション・ノート | System Design Considerations for High-Power Motor Driver Applications | PDF | HTML | 2021年 6月 22日 | |||
アプリケーション・ノート | Understanding Smart Gate Drive (Rev. D) | 2021年 3月 1日 | ||||
アプリケーション・ノート | スマート・ゲート・ドライブについて (Rev. C 翻訳版) | 最新英語版 (Rev.D) | 2020年 7月 9日 | |||
ホワイト・ペーパー | Power Electronics in Motor Drives: Where is it? (Rev. A) | 2019年 10月 1日 | ||||
アプリケーション・ノート | Hardware Design Considerations for an Efficient Vacuum Cleaner Using a BLDC Moto (Rev. B) | PDF | HTML | 2019年 3月 6日 | |||
EVM ユーザー ガイド (英語) | DRV8308 User's Guide (Rev. F) | 2018年 9月 12日 | ||||
技術記事 | Simplifying gate driver design for brushed DC motors | PDF | HTML | 2015年 6月 30日 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
DRV8308EVM — DRV8308 evaluation module for three-phase brushless DC motor pre-drivers
The three-phase brushless motor pre-driver DRV8308 drives sensored brushless DC and brushless AC (BLAC) - often referred to as permanent magnet synchronous (PMSM). Aimed at 12V and 24V motors, this configurable pre-driver features an integrated digital speed loop with advanced commutation (...)
TIDA-00197 — ブラシレス DC モータ、回転制御付き
パッケージ | ピン数 | ダウンロード |
---|---|---|
VQFN (RHA) | 40 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 材質成分
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点