LM27403
- Up to 97% Efficiency and 93% Duty Cycle
- Wide Input Voltage Range of 3 V to 20 V
- Switching Frequency From 200 kHz to 1.2 MHz
- Inductor-DCR-Based Overcurrent Protection With
Thermal Compensation - 0.6-V Reference With 1% Feedback Accuracy
- 30-ns Min On-Time for Low VOUT
- Integrated High-Current MOSFET Drivers
- Adaptive Deadtime Control
- Ultrafast Line and Load Transient Response
- High GBW Error Amplifier
- PWM Line Feedforward
- Integrated VDD Bias Supply LDO Subregulator
- Programmable System-Level OTP
- Precision Enable With Hysteresis
- Frequency Synchronization
- Monotonic Prebiased Start-up
- Programmable Soft-Start With Tracking
- Output Remote Sense
- Open-Drain Power Good Indicator
- 4-mm x 4-mm WQFN-24 PowerPAD™ Package
The LM27403 is a feature-rich, easy-to-use, synchronous buck controller offering exceptional levels of integration and performance for superior efficiency in high power density, point-of-load (POL) DC-DC regulator solutions. The resistor-programmable switching frequency from 200 kHz to 1.2 MHz and integrated, high-current MOSFET gate drivers with adaptive deadtime offer flexibility to optimize solution size and maximize conversion efficiency.
High precision and low output voltage are easily obtained with a 0.6-V, 1% accurate voltage reference together with a 30-ns high-side MOSFET minimum controllable on-time. Using lossless inductor dc resistance (DCR) current sensing and an inexpensive 2N3904 BJT to sense temperature remotely at the inductor, the LM27403 supports accurate and thermally compensated overcurrent protection (OCP).
The LM27403 has a conventional voltage-mode control loop with high gain-bandwidth error amplifier and PWM input voltage feedforward to simplify compensation design and enable excellent transient response throughout the full line voltage and load current ranges. Forced-PWM (FPWM) operation eliminates frequency variation to minimize EMI in sensitive applications. An open-drain Power Good circuit provides power-rail sequencing and fault reporting. Other features include programmable system-level thermal shutdown with automatic recovery, output voltage remote sense, configurable soft-start, monotonic start-up into prebiased loads, an integrated bias supply low-dropout (LDO) regulator, external power supply tracking, precision enable with customizable hysteresis for programmable line undervoltage lockout (UVLO), and synchronization capability for beat frequency sensitive and multiregulator applications. The LM27403 is offered in a 4-mm x 4-mm thermally enhanced WQFN-24 package with 0.5-mm pitch.
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| * | データシート | LM27403 Synchronous Buck Controller With Temperature-Compensated, Inductor-DCR-Based Overcurrent Protection and Programmable Thermal Shutdown データシート (Rev. B) | PDF | HTML | 2014/09/12 | ||
| 技術記事 | When and how to supply an external bias for buck controllers – part 2 | PDF | HTML | 2017/12/22 | |||
| 技術記事 | When and how to supply an external bias for buck controllers – part 1 | PDF | HTML | 2017/12/21 | |||
| アナログ デザイン ジャーナル | Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics | 2016/07/21 | ||||
| 技術記事 | High Density PCB Layout of DC/DC Converters, Part 2 | PDF | HTML | 2015/09/16 | |||
| 技術記事 | High Density PCB Layout of DC/DC Converters, Part 1 | PDF | HTML | 2015/09/12 | |||
| アプリケーション・ノート | Current Limit Foldback Improves Short Circuit Protection in LM274X Family (Rev. B) | 2013/04/23 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
LM27403EVM — LM27403 同期整流・降圧コントローラ、温度補償 DCR センス付き、評価モジュール
LM27403EVM-POL600 — 評価モジュール - LM27403 600kHz 高電力密度 POL
LM27403EVM-POL600 is a 600-kHz synchronous buck dc-dc regulator showcasing high power density and high efficiency. A 20 mm x 15 mm module on a single-side PCB uses a power block MOSFET from TI. Accurate overcurrent protection is available by leveraging the inductor’s sub-mΩ DCR and (...)
LM27403DESIGN-CALC — LM27403 PWM Regulator Design Tool
LM27403 クイックスタート デザイン ツールにようこそ。このスタンドアロンツールは、電圧モードPWMコントローラLM27403をベースとしたDC/DC降圧レギュレータの設計をサポートし、電源設計エンジニアを支援します。アプリケーションの要件を満たす最適化済みの設計を、迅速に具体化することができます。
PMP10691 — 高効率小型フォーム ファクタ 112W 同期整流降圧、リファレンス デザイン
PMP10691 は、入力電圧 12V から 3.3V/35A を出力する単相同期スイッチング レギュレータです。この設計では、LM27403 同期降圧コントローラと 2 個の CSD87350Q5D パワー ブロック MOSFET を使用し、250nH フェライト出力インダクタと組み合わせることで最大効率を実現しています。この設計ソリューションでは、最小の基板面積に収めるためにすべてセラミック コンデンサを使用しています。
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| WQFN (RTW) | 24 | Ultra Librarian |
購入と品質
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。