ホーム パワー マネージメント DC/DC スイッチング レギュレータ DC/DC コンバータ

3.1 ~ 40V の広い入力電圧範囲、2A、電流モードの非同期整流 昇圧レギュレータ

この製品には新バージョンがあります

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン配置が異なる製品。
LM5158 アクティブ デュアル ランダム スペクトラム拡散機能搭載、3A、85V、2.2MHz、広い入力電圧範囲 (VIN) に対応する、昇圧 / フライバック/ SEPIC の各コンバータ Newer device with higher Vout capability and higher switch current

製品詳細

Rating Catalog Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 3.1 Vout (max) (V) 75 Vout (min) (V) 1.259 Switch current limit (typ) (A) 2 Features Enable, Nonsynchronous rectification Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0021 Duty cycle (max) (%) 90
Rating Catalog Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 3.1 Vout (max) (V) 75 Vout (min) (V) 1.259 Switch current limit (typ) (A) 2 Features Enable, Nonsynchronous rectification Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0021 Duty cycle (max) (%) 90
TSSOP (PW) 16 32 mm² (5 mm × 6.4 mm) WSON (NHQ) 16 25 mm² (5 mm × 5 mm)
  • 80V internal switch
  • Operating input voltage range of 3.1V to 40V
  • Pin selectable operating frequency
       300kHz/700kHz (-3)
       600kHz/1.3MHz (-6)
  • Adjustable output voltage
  • External compensation
  • Input undervoltage lockout
  • Softstart
  • Current limit
  • Over temperature protection
  • External shutdown
  • Small 16-Lead TSSOP or 16-Lead LLP package

  • 80V internal switch
  • Operating input voltage range of 3.1V to 40V
  • Pin selectable operating frequency
       300kHz/700kHz (-3)
       600kHz/1.3MHz (-6)
  • Adjustable output voltage
  • External compensation
  • Input undervoltage lockout
  • Softstart
  • Current limit
  • Over temperature protection
  • External shutdown
  • Small 16-Lead TSSOP or 16-Lead LLP package

  • The LM5000 is a monolithic integrated circuit specifically designed and optimized for flyback, boost or forward power converter applications. The internal power switch is rated for a maximum of 80V, with a current limit set to 2A. Protecting the power switch are current limit and thermal shutdown circuits. The current mode control scheme provides excellent rejection of line transients and cycle-by-cycle current limiting. An external compensation pin and the built-in slope compensation allow the user to optimize the frequency compensation. Other distinctive features include softstart to reduce stresses during start-up and an external shutdown pin for remote ON/OFF control. There are two operating frequency ranges available. The LM5000-3 is pin selectable for either 300kHz (FS Grounded) or 700kHz (FS Open). The LM5000-6 is pin selectable for either 600kHz (FS Grounded) or 1.3MHz (FS Open). The device is available in a low profile 16-lead TSSOP package or a thermally enhanced 16-lead LLP package.


    The LM5000 is a monolithic integrated circuit specifically designed and optimized for flyback, boost or forward power converter applications. The internal power switch is rated for a maximum of 80V, with a current limit set to 2A. Protecting the power switch are current limit and thermal shutdown circuits. The current mode control scheme provides excellent rejection of line transients and cycle-by-cycle current limiting. An external compensation pin and the built-in slope compensation allow the user to optimize the frequency compensation. Other distinctive features include softstart to reduce stresses during start-up and an external shutdown pin for remote ON/OFF control. There are two operating frequency ranges available. The LM5000-3 is pin selectable for either 300kHz (FS Grounded) or 700kHz (FS Open). The LM5000-6 is pin selectable for either 600kHz (FS Grounded) or 1.3MHz (FS Open). The device is available in a low profile 16-lead TSSOP package or a thermally enhanced 16-lead LLP package.


    ダウンロード 字幕付きのビデオを表示 ビデオ

    技術資料

    結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
    6 をすべて表示
    上位の文書 タイプ タイトル フォーマットオプション 最新の英語版をダウンロード 日付
    * データシート LM5000 High Voltage Switch Mode Regulator データシート (Rev. D) 2007/03/09
    セレクション・ガイド 電源 IC セレクション・ガイド 2018 (Rev. R 翻訳版) 英語版 (Rev.R) 2018/09/13
    アプリケーション・ノート Automated Frequency Response Analyzer 2013/10/09
    ホワイト・ペーパー Wide VIN power management ICs simplify white paper (Rev. A) 2013/09/19
    ホワイト・ペーパー HV, Single-Chip DC/DC Reg Optimized for Flyback, Boost, or Frwd-Pwr Conv Apps 2003/10/01
    アプリケーション・ノート HV, single IC DC/DC reg optimizd for flyback, boost, or forward pwr cnvrtr apps 2003/03/24

    設計と開発

    その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

    評価ボード

    LM5000EVAL — 高電圧スイッチ・モード・レギュレータ

    ユーザー ガイド: PDF
    サポート対象の製品とハードウェア
    在庫あり
    制限:
    ??asset.out-of-stock-ti_ja_JP??
    入手不可
    計算ツール

    FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator

    電源エンジニアは、このツールを使用して、仕様に基づいて適切な絶縁型 DC/DC トポロジを選択することができます。選択したトポロジに応じて、カリキュレータは設計に適切な IC も推奨します。

    サポート対象の製品とハードウェア
    計算ツール

    LM5000MATHCAD-CALC — LM5000 Mathcad デザインツール

    サポート対象の製品とハードウェア
    リファレンス・デザイン

    PMP7932 — 絶縁フライバック コンバータ、産業用バイアス電源用 - リファレンス デザイン

    PMP7932 は、12Vin ~ 24Vin の入力電圧レンジを受け入れ、+12Vout @ 0.25A および -12V @ 0.25A という両極性の出力を供給する絶縁型フライバック コンバータです。

    サポート対象の製品とハードウェア
    パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
    TSSOP (PW) 16 Ultra Librarian
    WSON (NHQ) 16 Ultra Librarian

    購入と品質

    推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

    サポートとトレーニング

    TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

    コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

    TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

    ビデオ