LM72650-Q1
- AEC-Q100 qualified
for automotive applications:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature
- Functional Safety-Capable
- Synchronous CC-CV buck converter with
I2C
- Wide input voltage range:
4.5V to 70V
- Meets LV148 / ISO 21780 requirements
- Programmable VOUT from 1V to 24V in 10mV steps or from 3.3V to 24V in 20mV steps
- Programmable ILIM(avg) from 0.5A to 7.5A
- Output slew rate: 0.5mV/µs to 40mV/µs
- 22mΩ high-side and 18mΩ low-side NFETs
- Adjustable cable drop compensation (CDC)
- Analog current monitoring pin (IMON)
- Wide input voltage range:
4.5V to 70V
- Compatible with TPS2674x-Q1 USB Type-C power delivery (PD) controllers
- Designed for low EMI requirements
- Facilitates CISPR 25 Class 5 compliance
- ±5% dual-random spread spectrum with programmable modulation frequency
- Programmable fSW: 200kHz to 2.2MHz
- PFM, FPWM or external SYNC operations
- Programmable protection features
- UV/OV (PG) warning: ±5% or ±10%
- OVP warning, fault: 105% to 136% in 1% steps
- HICCUP mode OCP, TSD
- Compact, thermally optimized, 6mm × 6mm, VQFN-29 package
- Create a custom design using the LM72650-Q1 with the WEBENCH Power Designer
The LM72650-Q1 is a 70V, synchronous buck converter with constant-current constant-voltage (CC-CV) regulation and I2C interface. The device is compatible with USB Type-C PD controllers including the TPS2674x-Q1 family.
The converter uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The highly accurate CC-CV operation enables seamless transition between constant-current and constant-voltage modes. The I2C interface allows programming of output voltage in 10mV or 20mV steps, average output current limit in 50mA steps, as well as output voltage slew rate, switching frequency, soft-start slew rate, mode of operation, current loop compensation, output active discharge strength, and cable drop compensation gain.
The LM72650-Q1 also contains an array of safety features including undervoltage and overvoltage protection with programmable thresholds, overcurrent protection with programmable hiccup mode, and thermal shutdown.
Additional features of the LM72650-Q1 include programmable diode emulation for lower current consumption at light-load conditions, open-drain nINT flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated dual input (VIN and VOUTF) VCC supply regulator, and oversized VDDA regulator for powering external loads, such as companion USB PD controllers.
The LM72650-Q1 converter comes in a 6mm × 6mm thermally-optimized, 29-pin VQFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).
The LM72650-Q1 converter belongs to a family of synchronous buck converters with constant-current constant-voltage (CC-CV) regulation and I2C interface listed in Related Products.
技術資料
| 上位の文書 | タイプ | タイトル | フォーマットオプション | 最新の英語版をダウンロード | 日付 | |
|---|---|---|---|---|---|---|
| 機能安全情報 | LM726X0-Q1 Functional Safety FIT Rate, FMD and Pin FMA | PDF | HTML | 2026/05/26 | |||
| EVM ユーザー ガイド (英語) | LM72880-Q1 CC-CV Buck Converter With I2C Evaluation Module (Rev. A) | PDF | HTML | 2025/06/27 | |||
| EVM ユーザー ガイド (英語) | LM72650QEVM CC-CV Buck Converter Evaluation Module | PDF | HTML | 2025/06/26 | |||
| 証明書 | LM72650QEVM EU Declaration of Conformity (DoC) | 2025/06/10 |
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
LM72650QEVM — LM72650-Q1 評価基板
LM72650QEVM 評価基板 (EVM) は、LM72650 を使用した同期降圧 DC/DC レギュレータです。この評価基板 (EVM) は、I2C インターフェイスを搭載した定電流定電圧 (CC-CV) レギュレーション機能に対応しています。この評価基板は、24V ~ 70V の広い入力電圧範囲で動作し、CC モードで 5A の最大電流、CV モードで 20V の最大電圧を供給します。平均インダクタ電流制限と出力電圧のレギュレーション目標を I2C でプログラム可能です。フリーランニング スイッチング周波数も I2C (...)
LM72880QEVM-400 — LM72880-Q1 評価基板
LM72880-Q1 評価基板 (EVM) は、I2C インターフェイスを使用して定電流定電圧 (CC/CV) レギュレーションを実現できる、同期整流降圧 DC/DC レギュレータです。このEVMは、24V ~ 70V の広い入力電圧範囲 (J4 の VIN 端子から入力) で動作し、CC モードで 5A の最大電流、CV モードで 20V の最大電圧を供給します。平均インダクタ電流制限と出力電圧のレギュレーション目標を I2C でプログラム可能ですフリーランニング スイッチング周波数も I2C (...)
USB2ANY — USB2ANY インターフェイス アダプタ
USB2ANY インターフェイス アダプタは、コンピュータから USB 接続経由で評価基板 (EVM) を制御できるようにするためのツールです。USB2ANY は、複数の一般的なプロトコルとインターフェイスをサポートし、3.3V と 5V の電源電圧を供給します。
LM72630-LM72650-LM72680-LM72880-GUI — GUI for LM726x0 and LM72880 to set I2C configuration registers
LM72XXX-DESIGN-CALC — LM726xx, LM728xx quick-start design tool
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| VQFN (RRX) | 29 | Ultra Librarian |