ホーム パワー マネージメント DC/DC スイッチング レギュレータ DC/DC コンバータ

LM72880

アクティブ

製品詳細

この製品に対応するパラメータはありません。product.details.refer_datasheet=この情報を表示することができません。製品<a href={0}>データシート</a>をご覧ください。
VQFN (RRX) 29 36 mm² (6 mm × 6 mm)
  • Functional Safety-Capable
  • Synchronous CC-CV buck converter with I2C
    • Wide input voltage range: 4.5V to 80V
    • Programmable VOUT from 1V to 24V in 10mV steps or from 3.3V to 48V in 20mV steps
    • Programmable ILIM(avg) from 0.5A to 7.5A (RS = 8mΩ) or from 0.8A to 12A (RS = 5mΩ)
    • Output slew rate: 0.5mV/µs to 40mV/µs
    • 22mΩ high-side and 18mΩ low-side NFETs
    • Adjustable cable drop compensation (CDC)
    • Analog current monitoring pin (IMON)
    • Output active discharge for output voltage scaling and shutdown
  • Compatible with most power delivery (PD) controllers
  • Designed for low EMI requirements
    • Facilitates CISPR 11 Class B compliance
    • ±5% dual-random spread spectrum with programmable modulation frequency
    • Programmable fSW: 200kHz to 2.2MHz with Out-of-Audio™ operation
    • PFM, FPWM or external SYNC operations
  • Programmable protection features
    • UV/OV (PG) warning: ±5% or ±10%
    • OVP warning, fault: 105% to 136% in 1% steps
    • HICCUP mode OCP, TSD
  • Compact, thermally optimized 6mm × 6mm VQFN-29 package
  • Create a custom design using the LM72880 with the WEBENCH Power Designer
  • Functional Safety-Capable
  • Synchronous CC-CV buck converter with I2C
    • Wide input voltage range: 4.5V to 80V
    • Programmable VOUT from 1V to 24V in 10mV steps or from 3.3V to 48V in 20mV steps
    • Programmable ILIM(avg) from 0.5A to 7.5A (RS = 8mΩ) or from 0.8A to 12A (RS = 5mΩ)
    • Output slew rate: 0.5mV/µs to 40mV/µs
    • 22mΩ high-side and 18mΩ low-side NFETs
    • Adjustable cable drop compensation (CDC)
    • Analog current monitoring pin (IMON)
    • Output active discharge for output voltage scaling and shutdown
  • Compatible with most power delivery (PD) controllers
  • Designed for low EMI requirements
    • Facilitates CISPR 11 Class B compliance
    • ±5% dual-random spread spectrum with programmable modulation frequency
    • Programmable fSW: 200kHz to 2.2MHz with Out-of-Audio™ operation
    • PFM, FPWM or external SYNC operations
  • Programmable protection features
    • UV/OV (PG) warning: ±5% or ±10%
    • OVP warning, fault: 105% to 136% in 1% steps
    • HICCUP mode OCP, TSD
  • Compact, thermally optimized 6mm × 6mm VQFN-29 package
  • Create a custom design using the LM72880 with the WEBENCH Power Designer

The LM72880 is an 80V, synchronous buck converter with constant-current constant-voltage (CC-CV) regulation and I2C interface.

The converter uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The highly-accurate CC-CV operation enables seamless transition between constant-current and constant-voltage modes. The I2C interface allows programming of output voltage in 10mV or 20mV steps, average output current limit in 50mA steps, as well as output voltage slew rate, switching frequency, soft-start slew rate, mode of operation, current loop compensation, output active discharge strength, and cable drop compensation gain.

The LM72880 also contains an array of safety features including undervoltage and overvoltage protection with programmable thresholds, overcurrent protection with programmable hiccup mode, and thermal shutdown.

Additional features of the LM72880 include programmable diode emulation for lower current consumption at light-load conditions, open-drain nINT flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated dual input (VIN and VOUTF) VCC supply regulator, and oversized VDDA regulator for powering external loads, such as companion USB PD controllers.

The LM72880 converter comes in a 6mm × 6mm thermally-optimized, 29-pin VQFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).

The LM72880 converter belongs to a family of synchronous buck converters with constant-current constant-voltage (CC-CV) regulation and I2C interface listed in Related Products.

The LM72880 is an 80V, synchronous buck converter with constant-current constant-voltage (CC-CV) regulation and I2C interface.

The converter uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. The highly-accurate CC-CV operation enables seamless transition between constant-current and constant-voltage modes. The I2C interface allows programming of output voltage in 10mV or 20mV steps, average output current limit in 50mA steps, as well as output voltage slew rate, switching frequency, soft-start slew rate, mode of operation, current loop compensation, output active discharge strength, and cable drop compensation gain.

The LM72880 also contains an array of safety features including undervoltage and overvoltage protection with programmable thresholds, overcurrent protection with programmable hiccup mode, and thermal shutdown.

Additional features of the LM72880 include programmable diode emulation for lower current consumption at light-load conditions, open-drain nINT flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated dual input (VIN and VOUTF) VCC supply regulator, and oversized VDDA regulator for powering external loads, such as companion USB PD controllers.

The LM72880 converter comes in a 6mm × 6mm thermally-optimized, 29-pin VQFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).

The LM72880 converter belongs to a family of synchronous buck converters with constant-current constant-voltage (CC-CV) regulation and I2C interface listed in Related Products.

この製品に対する詳細情報はありません。
ダウンロード 字幕付きのビデオを表示 ビデオ

技術資料

結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
3 をすべて表示
上位の文書 タイプ タイトル フォーマットオプション 最新の英語版をダウンロード 日付
機能安全情報 LM728X0 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2026/11/13
EVM ユーザー ガイド (英語) LM72880-Q1 CC-CV Buck Converter With I2C Evaluation Module (Rev. A) PDF | HTML 2025/06/27
EVM ユーザー ガイド (英語) LM72650QEVM CC-CV Buck Converter Evaluation Module PDF | HTML 2025/06/26

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

LM72650QEVM — LM72650-Q1 評価基板

LM72650QEVM 評価基板 (EVM) は、LM72650 を使用した同期降圧 DC/DC レギュレータです。この評価基板 (EVM) は、I2C インターフェイスを搭載した定電流定電圧 (CC-CV) レギュレーション機能に対応しています。この評価基板は、24V ~ 70V の広い入力電圧範囲で動作し、CC モードで 5A の最大電流、CV モードで 20V の最大電圧を供給します。平均インダクタ電流制限と出力電圧のレギュレーション目標を I2C でプログラム可能です。フリーランニング スイッチング周波数も I2C (...)

ユーザー ガイド: PDF | HTML
サポート対象の製品とハードウェア
在庫あり
制限:
??asset.out-of-stock-ti_ja_JP??
入手不可
評価ボード

LM72880QEVM-400 — LM72880-Q1 評価基板

LM72880-Q1 評価基板 (EVM) は、I2C インターフェイスを使用して定電流定電圧 (CC/CV) レギュレーションを実現できる、同期整流降圧 DC/DC レギュレータです。このEVMは、24V ~ 70V の広い入力電圧範囲 (J4 の VIN 端子から入力) で動作し、CC モードで 5A の最大電流、CV モードで 20V の最大電圧を供給します。平均インダクタ電流制限と出力電圧のレギュレーション目標を I2C でプログラム可能ですフリーランニング スイッチング周波数も I2C (...)

ユーザー ガイド: PDF | HTML
サポート対象の製品とハードウェア
在庫あり
制限:
??asset.out-of-stock-ti_ja_JP??
入手不可
評価ボード

USB2ANY — USB2ANY インターフェイス アダプタ

USB2ANY インターフェイス アダプタは、コンピュータから USB 接続経由で評価基板 (EVM) を制御できるようにするためのツールです。USB2ANY は、複数の一般的なプロトコルとインターフェイスをサポートし、3.3V と 5V の電源電圧を供給します。

サポート対象の製品とハードウェア
在庫あり
制限:
??asset.out-of-stock-ti_ja_JP??
入手不可
評価基板 (EVM) 向けの GUI

LM72630-LM72650-LM72680-LM72880-GUI — GUI for LM726x0 and LM72880 to set I2C configuration registers

Graphical User Interface (GUI) to configure LM726x0 and LM72880 via I2C. You can use either the online GUI via a browser or the offline GUI.
サポート対象の製品とハードウェア
計算ツール

LM72XXX-DESIGN-CALC — LM726xx, LM728xx quick-start design tool

This stand-alone tool facilitates and assists with the design of a DC/DC buck regulator based on the LM72xxx. The user can expeditiously arrive at an optimized design to meet the application requirements
サポート対象の製品とハードウェア
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
VQFN (RRX) 29 Ultra Librarian

購入と品質

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ