ホーム パワー マネージメント ロード スイッチ

TPS22953

アクティブ

調整可能な立ち上がり時間と、電圧監視機能搭載、5.7V、5A、14mΩ のロード スイッチ

製品詳細

Product type Load switches Current limit type None Vin (max) (V) 5.7 Vin (min) (V) 0.7 Imax (A) 5 Rating Catalog Features Inrush current control, Power good signal, Reverse current blocking, Thermal shutdown, Under voltage lock out Number of channels 1 Quiescent current (Iq) (typ) (µA) 34 Shutdown current (ISD) (typ) (µA) 5 Soft start Adjustable Rise Time Ron (typ) (mΩ) 14 Operating temperature range (°C) -40 to 105
Product type Load switches Current limit type None Vin (max) (V) 5.7 Vin (min) (V) 0.7 Imax (A) 5 Rating Catalog Features Inrush current control, Power good signal, Reverse current blocking, Thermal shutdown, Under voltage lock out Number of channels 1 Quiescent current (Iq) (typ) (µA) 34 Shutdown current (ISD) (typ) (µA) 5 Soft start Adjustable Rise Time Ron (typ) (mΩ) 14 Operating temperature range (°C) -40 to 105
WSON (DSQ) 10 4 mm² (2 mm × 2 mm) WSON (DQC) 10 6 mm² (3 mm × 2 mm)
  • Integrated Single Channel Load Switch
  • Input Voltage Range: 0.7 V to 5.7 V
  • RON Resistance
    • RON = 14 mΩ at VIN = 5 V (VBIAS = 5 V)
  • 5-A Maximum Continuous Switch Current
  • Adjustable Undervoltage Lockout Threshold (UVLO)
  • Adjustable Voltage Supervisor with Power Good (PG) Indicator
  • Adjustable Output Slew Rate Control
  • Enhanced Quick Output Discharge Remains Active after Power is Removed (TPS22954 Only)
    • 15 Ω (Typ) Discharges 100 µF Within 10 ms
  • Reverse Current Blocking when Disabled (TPS22953 Only)
  • Automatic Restart after Supervisor Fault Detection When Enabled
  • Thermal Shutdown
  • Low Quiescent Current ≤ 50 µA
  • SON 10-pin Package with Thermal Pad
  • ESD Performance Tested Per JESD 22
    • 2-kV HBM and 750-V CDM
  • Integrated Single Channel Load Switch
  • Input Voltage Range: 0.7 V to 5.7 V
  • RON Resistance
    • RON = 14 mΩ at VIN = 5 V (VBIAS = 5 V)
  • 5-A Maximum Continuous Switch Current
  • Adjustable Undervoltage Lockout Threshold (UVLO)
  • Adjustable Voltage Supervisor with Power Good (PG) Indicator
  • Adjustable Output Slew Rate Control
  • Enhanced Quick Output Discharge Remains Active after Power is Removed (TPS22954 Only)
    • 15 Ω (Typ) Discharges 100 µF Within 10 ms
  • Reverse Current Blocking when Disabled (TPS22953 Only)
  • Automatic Restart after Supervisor Fault Detection When Enabled
  • Thermal Shutdown
  • Low Quiescent Current ≤ 50 µA
  • SON 10-pin Package with Thermal Pad
  • ESD Performance Tested Per JESD 22
    • 2-kV HBM and 750-V CDM

The TPS22953/54 are small, single channel load switches with controlled turn on. The devices contain a N-channel MOSFET that can operate over an input voltage range of 0.7 V to 5.7 V and can support a maximum continuous current of 5 A.

The integrated adjustable undervoltage lockout (UVLO) and adjustable power good (PG) threshold provides voltage monitoring as well as robust power sequencing. The adjustable rise time control of the device greatly reduces inrush current for a wide variety of bulk load capacitances, thereby reducing or eliminating power supply droop. The switch is independently controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals. A 15-Ω on-chip load is integrated into the device for a quick discharge of the output when switch is disabled. The enhanced Quick Output Discharge (QOD) remains active for short time after power is removed from the device to finish discharging the output.

The TPS22953/54 are available in small, space-saving 10-SON packages with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40°C to +105°C.

The TPS22953/54 are small, single channel load switches with controlled turn on. The devices contain a N-channel MOSFET that can operate over an input voltage range of 0.7 V to 5.7 V and can support a maximum continuous current of 5 A.

The integrated adjustable undervoltage lockout (UVLO) and adjustable power good (PG) threshold provides voltage monitoring as well as robust power sequencing. The adjustable rise time control of the device greatly reduces inrush current for a wide variety of bulk load capacitances, thereby reducing or eliminating power supply droop. The switch is independently controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals. A 15-Ω on-chip load is integrated into the device for a quick discharge of the output when switch is disabled. The enhanced Quick Output Discharge (QOD) remains active for short time after power is removed from the device to finish discharging the output.

The TPS22953/54 are available in small, space-saving 10-SON packages with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –40°C to +105°C.

ダウンロード 字幕付きのビデオを表示 ビデオ

お客様が関心を持ちそうな類似品

open-in-new 代替品と比較
比較対象デバイスと同等の機能で、ピン互換製品。
TPS22954 アクティブ 調整可能な立ち上がり時間と、電圧監視機能と出力放電機能搭載、5.7V、5A、14mΩ のロード スイッチ Pin-to-pin with no reverse current blocking and output discharge
比較対象デバイスと類似の機能。
TPS22992 アクティブ 調整可能な立ち上がり時間、調整可能な出力放電、5.5V、6A、8.7mΩ のロード スイッチ Lower Ron with short circuit protection

技術資料

結果が見つかりませんでした。検索条件をクリアしてから、再度検索を試してください。
13 をすべて表示
上位の文書 タイプ タイトル フォーマットオプション 最新の英語版をダウンロード 日付
* データシート TPS2295x 5.7 V, 5 A, 14 mΩ On-Resistance Load Switch データシート (Rev. D) PDF | HTML 2016/09/16
e-Book(PDF) 11 Ways to Protect Your Power Path(英語) 英語版 2020/10/30
アプリケーション概要 Making the Switch to an Integrated Load Switch 2019/06/11
アプリケーション・ノート Integrated Load Switches Versus Discrete MOSFETs (Rev. A) 2019/05/06
アプリケーション・ノート Load Switch Thermal Considerations (Rev. A) 2018/10/11
アプリケーション・ノート Basics of Load Switches (Rev. A) 2018/09/05
アプリケーション・ノート Power Multiplexing Using Load Switches and eFuses (Rev. A) 2017/06/20
アプリケーション・ノート Selecting a Load Switch to Replace a Discrete Solution 2017/04/30
アプリケーション・ノート Timing of Load Switches 2017/04/27
アプリケーション・ノート Reverse Current Protection in Load Switches 2016/05/19
アプリケーション・ノート Quiescent Current vs Shutdown Current for Load Switch Power Consumption 2016/03/30
技術記事 When to use load switches in place of discrete MOSFETs PDF | HTML 2016/02/03
アプリケーション・ノート Managing Inrush Current (Rev. A) 2015/05/28

設計と開発

その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。

評価ボード

TPS22953EVM — TPS22953 5.7V、オン抵抗 16mΩ のロード スイッチの評価基板

TPS22953 デバイスは、RON の小さいシングル チャネル ロード スイッチであり、動作電圧範囲は 0.7V ~ 5.7V です。TPS22953 には DSQ (0.4mm のピン ピッチ) および DQC (0.5mm のピン ピッチ) という 2 種類のパッケージ バージョンがあり、どちらも TPS22953EVM で評価できます。TPS22953 は 1 個の電圧スーパーバイザを内蔵しており、TPS22953EVM に実装する複数の外部抵抗を使用してその値を設定することができます。

ユーザー ガイド: PDF
サポート対象の製品とハードウェア
在庫あり
制限:
??asset.out-of-stock-ti_ja_JP??
入手不可
シミュレーション・モデル

TPS22953 TINA-TI Reference Design (Rev. A)

SLVMAT4A.TSC (182 KB) - TINA-TI リファレンス・デザイン
サポート対象の製品とハードウェア
シミュレーション・モデル

TPS22953 TINA-TI Transient Spice Model (Rev. A)

SLVMAT5A.ZIP (28 KB) - TINA-TI Spice モデル
サポート対象の製品とハードウェア
シミュレーション・モデル

TPS22953 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMAS6B.ZIP (54 KB) - PSpice モデル
サポート対象の製品とハードウェア
パッケージ ピン数 CAD シンボル、フットプリント、および 3D モデル
WSON (DSQ) 10 Ultra Librarian
WSON (DQC) 10 Ultra Librarian

購入と品質

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ フォーラムでは、TI のエンジニアからの技術サポートを提供

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ