TPS62745
- Input Voltage Range VIN from 3.3 V to 10 V
- Typical 400 nA Quiescent Current
- Up to 90% efficiency with load currents >15 µA
- Up to 300 mA Output Current
- RF Friendly DCS-Control™
- Low Output Ripple Voltage
- 16 Selectable Output Voltages from
- 1.8 V to 3.3 V (TPS62745)
- 1.3 V to 2.8 V (TPS627451)
- Integrated input voltage switch
- Integrated Discharge Function at VOUT
- Open Drain Power Good Output
- Operates with a Tiny 3.3 µH or 4.7 µH Inductor
- Small 3 mm × 2 mm WSON Package
The TPS62745 is a high efficiency ultra low power synchronous step down converter optimized for low power wireless applications. It provides a regulated output voltage consuming only 400-nA quiescent current. The device operates from two rechargeable Li-Ion batteries, Li-primary battery chemistries such as Li-SOCl2, Li-SO2, Li-MnO2 or four to six cell alkaline batteries. The input voltage range up to 10 V allows also operation from a USB port and thin-film solar modules. The output voltage is set with four VSEL pins between 1.8 V and 3.3 V for TPS62745 or 1.3 V and 2.8 V for TPS627451. TPS62745 features low output ripple voltage and low noise with a small output capacitor. An internal input voltage switch controlled by pin EN_VIN_SW connects the supply voltage to pin VIN_SW. The switch is intended to be used for an external voltage divider, scaling down the input voltage for an external ADC. The switch is automatically opened when the supply voltage is below the undervoltage lockout threshold. The TPS62745 is available in a small 12 pin 3 mm × 2 mm WSON package.
お客様が関心を持ちそうな類似品
比較対象デバイスと同等の機能で、ピン配置が異なる製品
技術資料
設計と開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
TPS62745EVM-622 — 超低静止電流、ワイド入力対応降圧コンバータ評価基板
この TPS62745EVM-622 を使用すると、TPS62745 の動作や機能の評価とテストを容易に実行できる設計を採用しています。この評価基板は、3.3V ~10V の入力電圧を、最大 300mA で 1.8V ~ 3.3V に設定されたレギュレーション済み出力に変換します。また、TPS62745 には入力電圧スイッチも内蔵されており、VIN_SW ピンを入力から接続 / 切断できます。TPS627450 は、静止電流が 500nA と非常に低くなっています。
TPS62745 PSpice Unencrypted Transient Model (Rev. A)
TIDA-00757 — 4 本の単三電池で 5 年以上のバッテリ寿命を実現するスマート ロックのリファレンス デザイン
TIDM-CAPTIVATE-E-LOCK — MSP430FR2633 マイコン CapTIvate 電子ロックとキーパッドのリファレンスデザイン
TIDA-01067 — 圧力、湿度、温度センシング機能付きのスマート ダンパ制御のリファレンス デザイン
TIDA-010018 — 低消費電力アプリケーション用の絶縁型電源およびデータ インターフェイスのリファレンス デザイン
TIDC-DSSS868WMBUS-DC — wM-Bus T/C モード / DSSS コード化データ パケット @ 868.95MHz 向けバッテリ駆動データ コレクタのリファレンス デザイン
| パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
|---|---|---|
| WSON (DSS) | 12 | Ultra Librarian |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 使用材料
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブ拠点
- アセンブリ拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。