AFE34RF90
- Request full data sheet
- Quad RF sampling 32 to 64GSPS DACs and ADCs
- RF frequency range: DC to >40GHz
- Sub-ADC core sample rate: 8GSPS
- Maximum signal bandwidth:
- 4T4R: 3.2GHz (4GSPS complex)
- 2T2R: 6.4GHz (8GSPS complex)
- Input clock: 4 to 8GHz
- ADC performance
- Noise floor: -154dBFS/Hz
- IMD3 (-7dBFS each tone, 16.1GHz): -60dBc
- DAC performance
- NSD (-12dBFS, 16.1GHz): -163dBFS/Hz
- IMD3 (-7dBFS each tone, 16.1GHz): -60dBc
- DSP blocks
- Multiband DUC/DDC (phase coherent hopping)
- PFIR equalizer
- FFT spectrum analyzer
- Fractional resampler
- SerDes data interface:
- JESD204B and JESD204C compatible
- 16 SerDes transceivers up to 32.5Gbps
- Subclass 1 multi-device synchronization
- Supply voltages: 0.9V, 1.2V, and 1.8V
- Package: 24mm × 24mm FCBGA, 0.8mm pitch
The AFE34RF90 is a high performance, wide bandwidth multi-channel transceiver, integrating four 64GSPS RF sampling digital-to-analog converters (DAC) and four 64GSPS RF sampling analog-to-digital converters (ADC). With receiver RF bandwidth of 40GHz and transmitter RF bandwidth of 30GHz, this device enables direct RF sampling in the frequency bands up through Ka-band without the need for additional frequency conversions stages. This improvement in density and flexibility enables high-channel-count, multi-mission systems.
The TX signal paths support interpolation and digital up conversion options that deliver up to 3.2GHz of signal bandwidth for four TX or 6.4GHz for two TX. An advanced digital signal processing block includes a fractional resampler and a PFIR equalizer followed by multiple digital up converters. The output of the DSP block drive a 64GSPS DAC with a mixed mode output option to enhance 2nd Nyquist operation.
Each receiver chain includes a 64GSPS ADC, followed by multiple digital down converters (DDC), PFIR equalizers and a fractional resampler. Each receiver channel has a signal detection and FFT block for spectral analysis that can automatically control the DDC frequency to quickly tune to spectra with interesting signals. The output of the signal processing block can deliver up to 3.2GHz of signal bandwidth for four RX or 6.4GHz for two RX.
The device includes several loopback paths with variable delay and gain, from a super low latency path directly from the ADC to DAC and longer latency paths including frequency translation.
AFE34RF90 제품군에 대한 전체 데이터 시트 및 설계 리소스가 제공됩니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | AFE34RF90 Quad Channel 12-Bit 64GSPS RF Sampling AFE datasheet | PDF | HTML | 2026. 6. 4 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| FCBGA (AQK) | 826 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.