AMC4311D
- Single-supply operation (3.3V or 5V) with integrated DC/DC converter
- DC/DC external load current: 8mA (maximum)
- High input impedance: 1.3GΩ (typical)
- Linear input voltage range: –0.1V to 2V
- Fixed gain: 1V/V
- Differential output
- Low DC errors:
- Offset error: ±0.8mV (maximum)
- Offset drift: ±10µV/°C (maximum)
- Gain error: ±0.25% (maximum)
- Gain drift: ±50ppm/°C (maximum)
- Nonlinearity: ±0.035% (maximum)
- High CMTI: 150V/ns (minimum)
- Low EMI: Meets CISPR-11 and CISPR-25 standards
- System-level diagnostic features
- Isolation ratings:Reinforced isolation
- Safety-related certifications:
- DIN EN IEC 60747-17 (VDE 0884-17)
- UL1577
- Fully specified over the industrial temperature range: –40°C to +125°C
The AMC4311D is a precision, galvanically isolated amplifier with a fully integrated, isolated DC/DC converter that allows single-supply operation from the low-side of the device. The DC/DC converter is capable of sourcing an external current of up to 8mA to power additional device (example: AMC0300D, AMC23C12) on the high side. The high-impedance input is optimized for connection to a high-impedance resistive divider or other voltage signal source with high output resistance.
The isolation barrier separates parts of the system that operate on different common-mode voltage levels. The isolation barrier is highly resistant to magnetic interference. This barrier is certified to provide reinforced isolation up to 5kVRMS.
The AMC4311D outputs a differential signal proportional to the input voltage. The differential output is insensitive to ground shifts and enables routing the output signal over long distances.
The AMC4311D device comes in 20-pin, wide-body SOIC package, and is fully specified over the temperature range from –40°C to +125°C.
추가 정보 요청
전체 데이터 시트를 사용할 수 있습니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | AMC4311D Precision, 2V Input, Reinforced Isolated Amplifier with Differential Output and Integrated DC/DC Converter datasheet | PDF | HTML | 2026/05/26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMC43XXDVVEVM — AMC43xx 평가 모듈 (DVV 패키지)
AMC43xxDVVEVM은 AMC43xxDVV 장치 중 하나와 함께 DC/DC 컨버터가 통합된 절연 고정밀 고전압 감지 설계를 시연합니다. 이 평가 모듈은 유연한 출력 필터링 설계를 통해 모든 AMC43xxDVV 장치를 지원할 수 있습니다. EVM에는 입력 신호의 간편한 인가 및 출력 신호 측정을 위한 터미널 블록과 테스트 포인트가 모두 포함되어 있습니다.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| — (—) | — |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치