DLP991U
- High resolution 4096 × 2176 micromirror array
- > 8.9 million micromirrors
- 5.4µm micromirror pitch
- 0.99" micromirror array diagonal
- ±12° micromirror tilt relative to flat S
- Designed for corner illumination
- Integrated micromirror driver circuitry
- Designed for visible light use (400nm to 800nm)
- 97% window transmission (single pass, through two window surfaces)
- 89% micromirror reflectivity
- 79% average photopic weighted diffraction and 80% unweighted (410nm–800nm) efficiency (f/2.4) per photopic luminous efficiency—CIE 086-1990
- 90% on-state array fill factor
Featuring over 8.9 million micromirrors, the high-resolution DLP991U digital micromirror device (DMD) is a spatial light modulator (SLM) that modulates the amplitude, direction, or phase of incoming light. This advanced light control technology has numerous applications in the industrial, medical, and consumer markets. The streaming nature of the DLP991U and its DLPC964 controller make it ideally suited for exceptionally high-speed continuous data streaming for direct imaging (LDI) applications. The DMD enables large 3D print build sizes and ultra-fine resolutions for various 3D printing applications. The high resolution provides a direct benefit to the scanning of larger objects in 3D machine vision applications.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | DLP991U Industrial Digital Micromirror Device datasheet | PDF | HTML | 2024/12/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DLPLCR99EVM — 0.99인치, 4K Type-A DLP® DMD(디지털 마이크로미러 디바이스)용 평가 모듈
DLPLCR99EVM은 5.4µm 피치의 4096 x 2176 마이크로미러가 포함된 0.99인치 4K, Type-A DMD가 포함된 DMD 보드 EVM입니다. DLP991U DMD는 넓은 노출 영역을 갖추고 고해상도에서 최대 8.9M 픽셀을 제공합니다. 사용자는 DLPLCRC964EVM과의 페어링을 통해 산업용 애플리케이션에서 필요한 데 따라 다양한 비트 심도와 노출 시간에서 빠른 패턴 속도를 달성할 수 있습니다.
DLPLCRC964EVM — DLPC964 DLP® LightCrafter™ 평가 모듈
DLPC964 DLP® LightCrafter™ 평가 모듈(EVM)은 DLPC991U DMD를 지원하는 DLPC964 컨트롤러 아키텍처 사용자들을 위해 보다 빠른 개발 주기를 지원하는 레퍼런스 설계를 제공합니다. 이 플랫폼은 외부 FPGA 보드로부터 고속 비트 플레인 데이터를 수신하고, 수신한 비트 플레인 데이터를 포맷한 후 DLPLCR99EVM에 로드해 DLP991U DMD에 표시합니다.
INV-3P-DLP991U — In-Vision High-Speed DLP991U Development Kit
The DLP991U Development Kit is a state-of-the-art programmable and complete DLP evaluation kit tailored for OEMs, engineers and researchers pushing the boundaries of optical precision. Designed around the 0.99” 4K DLP chip, it offers unmatched resolution, frame rate, and pattern control for (...)
DLPM074 — DLP991U/UUV with FLV package (9Type-A) 3D-CAD Geometry
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
지원되는 제품 및 하드웨어
제품
≥ 0.47인치 어레이 제품
≤ 0.47인치 어레이 Pico 제품
자외선 제품(< 400nm)
가시 제품(420~700nm)
분광학 및 광 네트워킹 제품
외부 조명 및 프로젝션 제품
근자외선 제품(400~420nm)
디스플레이 제품
근적외선 제품 (> 700 nm)
멀티 채널 IC(PMIC)
Unassigned processors
하드웨어 개발
평가 보드
개발 키트
지원 소프트웨어
DLPM076 — 9Type-A DMD (305i) Mounting and Electrical Interconnect Information
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
지원되는 제품 및 하드웨어
제품
근자외선 제품(400~420nm)
≥ 0.47인치 어레이 제품
≤ 0.47인치 어레이 Pico 제품
자외선 제품(< 400nm)
가시 제품(420~700nm)
분광학 및 광 네트워킹 제품
외부 조명 및 프로젝션 제품
디스플레이 제품
근적외선 제품 (> 700 nm)
멀티 채널 IC(PMIC)
Unassigned processors
하드웨어 개발
평가 보드
개발 키트
지원 소프트웨어
DLPR116 — DLPLCR99EVM Design Files
지원되는 제품 및 하드웨어
제품
근자외선 제품(400~420nm)
하드웨어 개발
평가 보드
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DLP-TYPEA.9 (FLV) | 321 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.