DRA75P
- Architecture Designed for Infotainment Applications
- Video, Image, and Graphics Processing
Support
- Full-HD Video (1920 × 1080p, 60 fps)
- Multiple Video Input and Video Output
- 2D and 3D Graphics
- Dual Arm® Cortex®-A15 Microprocessor Subsystem
- Up to Two C66x Floating-Point VLIW DSP
- Fully Object-Code Compatible with C67x and C64x+
- Up to Thirty-Two 16 x 16-Bit Fixed-Point Multiplies per Cycle
- Up to 2.5MB of On-Chip L3 RAM
- Level 3 (L3) and Level 4 (L4) Interconnects
- Two DDR2/DDR3/DDR3L Memory Interface (EMIF) Modules
- Supports up to DDR2-800 and DDR3-1333
- Up to 2GB Supported per EMIF
- Dual ARM® Cortex®-M4 Image Processing Units (IPU)
- Up to Two Embedded Vision Engines (EVEs)
- Imaging Subsystem (ISS)
- Image Signal Processor (ISP)
- Wide Dynamic Range and Lens Distortion Correction (WDR and Mesh LDC)
- One Camera Adaptation Layer (CAL_B)
- IVA Subsystem
- Display
Subsystem
- Display Controller with DMA Engine and up to Three Pipelines
- HDMI™ Encoder: HDMI 1.4a and DVI 1.0 Compliant
- Video Processing Engine (VPE)
- 2D-Graphics Accelerator (BB2D)
Subsystem
- Vivante® GC320 Core
- Dual-Core PowerVR® SGX544 3D GPU
- Two Video Input Port (VIP) Modules
- Support for up to Eight Multiplexed Input Ports
- General-Purpose Memory Controller (GPMC)
- Enhanced Direct Memory Access (EDMA) Controller
- 2-Port Gigabit Ethernet (GMAC)
- Sixteen 32-Bit General-Purpose Timers
- 32-Bit MPU Watchdog Timer
- Five Inter-Integrated Circuit (I2C) Ports
- HDQ™/1-Wire® Interface
- SATA Interface
- Media Local Bus (MLB) Subsystem
- Ten Configurable UART/IrDA/CIR Modules
- Four Multichannel Serial Peripheral Interfaces (McSPI)
- Quad SPI (QSPI)
- Eight Multichannel Audio Serial Port (McASP) Modules
- SuperSpeed USB 3.0 Dual-Role Device
- Three High-Speed USB 2.0 Dual-Role Devices
- Four MultiMedia Card/Secure Digital/Secure Digital Input Output Interfaces (MMC™/SD®/SDIO)
- PCI Express® 3.0
Subsystems with Two 5-Gbps Lanes
- One 2-Lane Gen2-Compliant Port
- or Two 1-Lane Gen2-Compliant Ports
- Up to Two Controller Area Network (DCAN)
Modules
- CAN 2.0B Protocol
- Modular Controller Area Network (MCAN)
Module
- CAN 2.0B Protocol with Available FD (Flexible Data Rate) Functionality
- Up to 247 General-Purpose I/O (GPIO) Pins
- Real-Time Clock Subsystem (RTCSS)
- Device Security Features
- Hardware Crypto Accelerators and DMA
- Firewalls
- JTAG® Lock
- Secure Keys
- Secure ROM and Boot
- Customer Programmable Keys and OTP Data
- Power, Reset, and Clock Management
- On-Chip Debug with CTools Technology
- 28-nm CMOS Technology
- 23 mm × 23 mm, 0.8-mm Pitch, 760-Pin BGA (ABZ)
DRA74xP and DRA75xP (Jacinto 6 Plus) automotive applications processors are built to meet the intense processing needs of the modern digital cockpit automobile experiences.
The device enables Original-Equipment Manufacturers (OEMs) and Original-Design Manufacturers (ODMs) to quickly implement innovative connectivity technologies, speech recognition, audio streaming, and more. Jacinto 6 Plus devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set.
Programmability is provided by dual-core Arm Cortex-A15 RISC CPUs with Neon™ extension, TI C66x VLIW floating-point DSP core, and Vision AccelerationPac (with one or more EVEs). The Arm allows developers to keep control functions separate from other algorithms programmed on the DSP and coprocessors, thus reducing the complexity of the system software.
Additionally, TI provides a complete set of development tools for the Arm, DSP, and EVE coprocessor, including C compilers and a debugging interface for visibility into source code.
Cryptographic acceleration is available in all devices. All other supported security features, including support for secure boot, debug security and support for trusted execution environment are available on High-Security (HS) devices. For more information about HS devices, contact your TI representative.
The DRA74xP and DRA75xP Jacinto 6 Plus processor family is qualified according to the AEC-Q100 standard.
DRA74xP and DRA75xP (Jacinto 6 Plus) automotive applications processors are built to meet the intense processing needs of the modern digital cockpit automobile experiences.
The device enables Original-Equipment Manufacturers (OEMs) and Original-Design Manufacturers (ODMs) to quickly implement innovative connectivity technologies, speech recognition, audio streaming, and more. Jacinto 6 Plus devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set.
Programmability is provided by dual-core Arm Cortex-A15 RISC CPUs with Neon extension, TI C66x VLIW floating-point DSP core, and Vision AccelerationPac (with one or more EVEs). The Arm allows developers to keep control functions separate from other algorithms programmed on the DSP and coprocessors, thus reducing the complexity of the system software.
Additionally, TI provides a complete set of development tools for the Arm, DSP, and EVE coprocessor, including C compilers and a debugging interface for visibility into source code.
Cryptographic acceleration is available in all devices. All other supported security features, including support for secure boot, debug security and support for trusted execution environment are available on High-Security (HS) devices. For more information about HS devices, contact your TI representative.
The DRA74xP and DRA75xP Jacinto 6 Plus processor family is qualified according to the AEC-Q100 standard.
기술 자료
설계 및 개발
전원 공급 솔루션
DRA75P에 사용 가능한 전원 공급 솔루션을 찾아보세요. TI는 칩(SoC), 프로세서, 마이크로컨트롤러, 센서 또는 FPGA(Field Programmable Gate Array)의 TI와 비TI 시스템을 위한 전원 공급 솔루션을 제공합니다.
J6PEVM577P — DRA7xP 평가 모듈
DRA77xP/DRA76xP-ACD는 DRA77xP 및 DRA76xP JacintoTM Infotainment System-on-Chips(SoCs) 전체에서 확장과 재사용이 가능하도록 설계된 평가 플랫폼으로, 2개의 ARM Cortex-A15 마이크로프로세서 유닛, 2개의 Arm® Cortex®-M4 처리 하위시스템이 혼합된 확장 가능한 이기종 아키텍처를 통합한 Jacinto DRA77xP SoC를 기반으로 합니다. 각각 2개의 ARM Cortex 마이크로프로세서, 2개의 디지털 신호 프로세서(DSPC66x), 2개의 (...)
PROCESSOR-SDK-ANDROID-AUTOMOTIVE-DRA7X
Processor SDK Linux Automotive는 TI의 인포테인먼트 SoC의 Jacinto™ DRAx 제품군을 위한 기본 소프트웨어 개발 플랫폼입니다. 소프트웨어 프레임 워크를 통해 사용자는 차세대 자동차를 위한 기능이 풍부한 인포테인먼트 솔루션(재구성 가능한 디지털 계기판, 통합 콕핏, 차량 내 인포테인먼트, 텔레매틱스, 뒷좌석 엔터테인먼트 등)을 개발할 수 있습니다. SDK는 일반적인 Processor SDK 플랫폼을 기반으로 합니다.
주요 내용- (...)
PROCESSOR-SDK-LINUX-AUTOMOTIVE-DRA7X — PROCESSOR-SDK-LINUX-AUTOMOTIVE-DRA7X
Processor SDK Linux Automotive는 TI의 인포테인먼트 SoC의 Jacinto™ DRAx 제품군을 위한 기본 소프트웨어 개발 플랫폼입니다. 소프트웨어 프레임 워크를 통해 사용자는 차세대 자동차를 위한 기능이 풍부한 인포테인먼트 솔루션(재구성 가능한 디지털 계기판, 통합 콕핏, 차량 내 인포테인먼트, 텔레매틱스, 뒷좌석 엔터테인먼트 등)을 개발할 수 있습니다. SDK는 일반적인 Processor SDK 플랫폼을 기반으로 합니다.
주요 내용- (...)
PROCESSOR-SDK-RTOS-AUTOMOTIVE-DRA7X
Processor SDK Linux Automotive는 TI의 인포테인먼트 SoC의 Jacinto™ DRAx 제품군을 위한 기본 소프트웨어 개발 플랫폼입니다. 소프트웨어 프레임 워크를 통해 사용자는 차세대 자동차를 위한 기능이 풍부한 인포테인먼트 솔루션(재구성 가능한 디지털 계기판, 통합 콕핏, 차량 내 인포테인먼트, 텔레매틱스, 뒷좌석 엔터테인먼트 등)을 개발할 수 있습니다. SDK는 일반적인 Processor SDK 플랫폼을 기반으로 합니다.
주요 내용- (...)
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
GHS-INTEGRITY-RTOS — Green Hills INTEGRITY RTOS
VCTR-3P-MICROSAR — 마이크로컨트롤러 및 고성능 컴퓨터(HPC)용 벡터 MICROSAR AUTOSAR 소프트웨어
MICROSAR 및 DaVinci 제품군은 정교한 임베디드 소프트웨어 및 마이크로 컨트롤러 및 HPC를 위한 강력한 개발 툴로 ECU 개발을 간소화합니다. 고급 인프라 소프트웨어를 사용하면 ECU를 위한 최적의 기반을 만들고 관련 툴로 수반되는 모든 개발 작업을 간소화할 수 있습니다. MICROSAR 내장 소프트웨어는 AUTOSAR 클래식 및 적응형과 같은 관련 표준에 따라 개발되었습니다. 이 소프트웨어는 ISO 26262까지 ASIL D에 따른 안전 관련 애플리케이션에도 적합합니다. 또한, 지능형 사이버 보안 기능은 무단 액세스 (...)
CLOCKTREETOOL — Sitara, 오토모티브, 비전 분석 및 디지털 신호 프로세서용 클록 트리 툴
The Clock Tree Tool (CTT) for Sitara™ ARM®, Automotive, and Digital Signal Processors is an interactive clock tree configuration software that provides information about the clocks and modules in these TI devices. It allows the user to:
- Visualize the device clock tree
- Interact with clock tree (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| FCCSP (ABZ) | 760 | Ultra Librarian |