DRV2605
- Flexible Haptic/Vibra Driver
- LRA (Linear Resonance Actuator)
- ERM (Eccentric Rotating Mass)
- I2C Controlled Digital Playback Engine
- Real-Time Playback Mode via I2C
- Smart Loop
Architecture(1)
- Automatic Overdrive/Braking (ERM/LRA)
- Automatic Resonance Tracking (LRA)
- Automatic Actuator Diagnostic (ERM/LRA)
- Automatic Level Calibration (ERM/LRA)
- Licensed
Immersion™
TouchSense® 2200
features:
- Integrated Immersion Effect Library
- Audio to Vibe
- Optional PWM Input with 0% to 100% Duty Cycle Control Range
- Optional Analog Input Control
- Optional Hardware Trigger Pin
- Efficient Output Drive
- Fast Start Up Time
- Constant Acceleration Over Supply Voltage
- 1.8 V Compatible, VDD Tolerant Digital Pins (1)
(1)Patent pending control algorithm
The DRV2605 device is designed to provide extremely-flexible haptic control of ERM and LRA actuators over a shared I2C-compatible bus. This control relieves the host processor from ever generating pulse-width modulated (PWM) drive signals, saving both costly timer interrupts and hardware pins.
The DRV2605 device provides an extensive integrated library over 100 licensed effects from Immersion for ERM and LRA which eliminates the need to design haptics waveforms.
The DRV2605 device offers a licensed version of the TouchSense 2200 software from Immersion, which includes the 2200 Effects Library, and 2200 audio-to-vibe features. Additionally, the real-time playback mode allows the host processor to bypass the library playback engine and play waveforms directly from the host through I2C.
The DRV2605 device also contains a smart-loop architecture, which allows effortless auto resonant drive for LRA as well as feedback-optimized ERM drive. This feedback provides automatic overdrive and braking, which creates a simplified input waveform paradigm as well as reliable motor control and consistent motor performance. The audio-to-haptics mode automatically converts an audio input signal to meaningful haptic effects.
The DRV2605 device features a trinary-modulated output stage, providing greater efficiency than linear-based output drivers. The 9-ball WCSP footprint, flexible operation, and low component count make the DRV2605 device the ideal choice for portable and touch-enabled vibratory and haptic applications.
For an important notice regarding Immersion software, see the Legal Notice section.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV-ACC16-EVM — 햅틱 가속도계 측정 툴
DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA 햅틱 드라이버 평가
The DRV2605 is a haptic driver designed for Linear Resonant Actuators (LRA) and Eccentric Rotating Mass (ERM) motors. It provides many features which help eliminate the design complexities of haptic motor control including reduced solution size, high efficiency output drive, closed-loop motor (...)
SLOC283 — DRV2605 API Software
DRV260XSW-LINUX — DRV260x용 리눅스 드라이버
The Linux driver supports the DRV260X series of haptic motor drivers. The Linux driver supports communication through the I2C bus and interfaces with the input sub-system for a forced feedback response.
Linux Mainline Status
Available in Linux Main line: Yes
Available through git.ti.com: N/A
Supported (...)
SLOC318 — DRV2605EVM-CT Firmware v1.0
HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2
햅틱 제어 콘솔 소프트웨어는 TI의 햅틱 드라이버를 위한 평가 및 개발 제품군입니다. 햅틱 제어 콘솔 소프트웨어는 고급 촉각 피드백을 개발하기 위한 햅틱 드라이버와 타사 햅틱 액추에이터의 평가를 지원합니다.
시작하려면 햅틱 드라이버용 평가 모듈(EVM)을 USB를 통해 햅틱 제어 콘솔 소프트웨어를 사용하여 컴퓨터에 연결하여 전체 장치를 설정, 제어 및 평가하면 됩니다. 햅틱 제어 콘솔 소프트웨어에는 관련 장치를 위한 빠른 설정 콘솔, 전체 장치 레지스터 맵, 기본 장치 RAM 관리가 포함되어 있습니다.
지원되는 평가 모듈 및 (...)
DRV2604-2605_DESIGN_TOOL — DRV2604 및 DRV2605 설계 방정식 툴
The DRV2604/5 Design Equation document assists the user in the design phase by calculating the driver hardware configuration based off of user-defined input parameters. The DRV2604/5 is designed to give extremely flexible haptic control of ERM and LRA actuators over a shared I2C compatible (...)
SLOR114 — DRV2604 and DRV2605 Configuration Tool and Design Equations
TIDA-00198 — 4와이어 저항식 터치 패널을 위한 햅틱 피드백이 지원되는 저항식 듀얼 터치 레퍼런스 설계 보드
This reference evaluation module, featuring the TSC2013-Q1 resistive dual touch controller, is a fully-functional USB powered platform that allows 4-wire resistive touch screen panels to be connected to the USB port of a PC or laptop for evaluation. User control is provided via a powerful, (...)
TIDA-00266 — Bluetooth® 저에너지 및 iOS 애플리케이션을 사용하는 햅틱 피드백 레퍼런스 디자인
This reference design features the DRV2605 Eccentric Rotating Mass (ERM) and Linear Resonant Actuator (LRA) Haptic Driver with integrated pre-licensed effect library from Immersion. The board includes an LRA, alkaline battery pack, and can be programmed and controlled with the (...)
TIDA-060039 — 유도성 터치 및 자기 다이얼 비접촉 사용자 인터페이스 레퍼런스 설계
이 레퍼런스 설계는 유도성 및 홀 효과 센서 기술을 사용하여 인간-기계 인터페이스를 제공합니다. 유도성 감지 장치는 매끄러운 표면에 8개의 각기 다른 터치 버튼을 생성하고, 홀 효과 센서는 추가 버튼으로 사용할 수 있는 회전식 자기 다이얼을 생성하는 데 사용됩니다.
유도성 감지 터치 버튼을 사용하면 누르는 힘을 사용해 버튼 누르기를 결정하는 강력한 솔루션을 제공할 수 있습니다. 따라서 먼지나 버튼 표면의 손상 같은 환경적 요인을 무시하고 장갑을 착용한 상태로 터치 버튼을 사용할 수 있습니다. 홀 효과 센서 다이얼은 무접촉 회전을 (...)
TIDA-HAPTIC-MOTOR-CONTROL-REFERENCE-DESIGN — 개인 및 산업용 제품의 촉각 피드백 설계를 간소화하는 고급 햅틱 드라이버
This haptic driver reference design for LRA and ERM motors helps eliminate the design complexities of haptic motor control with features like reduced solution size, high efficiency output drive, closed-loop motor control, quick device startup and auto-resonance frequency tracking. This reference (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YZF) | 9 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.