제품 상세 정보

Type Latch Operate point (typ) (mT) 0.7, 1.8 Operate point (max) (mT) 2.9, 4.5 Release point (min) (mT) -4.5, -2.9 Supply current (µA) 2300 Bandwidth (kHz) 30 Supply voltage (min) (V) 2.5 Supply voltage (max) (V) 5.5 Rating Automotive Operating temperature range (°C) -40 to 150 Output Open drain
Type Latch Operate point (typ) (mT) 0.7, 1.8 Operate point (max) (mT) 2.9, 4.5 Release point (min) (mT) -4.5, -2.9 Supply current (µA) 2300 Bandwidth (kHz) 30 Supply voltage (min) (V) 2.5 Supply voltage (max) (V) 5.5 Rating Automotive Operating temperature range (°C) -40 to 150 Output Open drain
SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 0: –40°C to 150°C ambient operating temperature range
    • Device HBM ESD classification Level H3A
    • Device CDM ESD classification Level C6
  • Digital-latch hall effect sensor
  • High magnetic sensitivity:
    • DRV5015A1-Q1: ±0.7 mT (typical)
    • DRV5015A2-Q1: ±1.8 mT (typical)
    • DRV5015A3-Q1: ±1.8 mT (inverted, typical)
  • Integrated hysteresis
  • Fast 30-kHz sensing bandwidth
  • 2.5-V to 5.5-V operating VCC range
  • Open-drain output capable of 20-mA output current
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 0: –40°C to 150°C ambient operating temperature range
    • Device HBM ESD classification Level H3A
    • Device CDM ESD classification Level C6
  • Digital-latch hall effect sensor
  • High magnetic sensitivity:
    • DRV5015A1-Q1: ±0.7 mT (typical)
    • DRV5015A2-Q1: ±1.8 mT (typical)
    • DRV5015A3-Q1: ±1.8 mT (inverted, typical)
  • Integrated hysteresis
  • Fast 30-kHz sensing bandwidth
  • 2.5-V to 5.5-V operating VCC range
  • Open-drain output capable of 20-mA output current

The DRV5015-Q1 is a low-voltage digital-latch Hall effect sensor designed for high-speed and high-temperature motor applications. Operating from a
2.5-V to 5.5-V power supply, the device senses magnetic flux density and presents a digital output based on predefined magnetic thresholds.

Alternating north and south magnetic poles are required to toggle the output and integrated hysteresis provides robust switching.

The device is offered in two magnetic threshold options and an inverted output option. The high magnetic sensitivity provides flexibility in low-cost magnet selection and component placement.

The device performs consistently across a wide ambient temperature range of –40°C to +150°C.

 

 

The DRV5015-Q1 is a low-voltage digital-latch Hall effect sensor designed for high-speed and high-temperature motor applications. Operating from a
2.5-V to 5.5-V power supply, the device senses magnetic flux density and presents a digital output based on predefined magnetic thresholds.

Alternating north and south magnetic poles are required to toggle the output and integrated hysteresis provides robust switching.

The device is offered in two magnetic threshold options and an inverted output option. The high magnetic sensitivity provides flexibility in low-cost magnet selection and component placement.

The device performs consistently across a wide ambient temperature range of –40°C to +150°C.

 

 

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
DRV5013-Q1 활성 차량용, 고전압(최대 38V), 고대역폭(30kHz) 홀 효과 래치 Higher operating range
DRV5015 활성 고감도(±2-mT), 저전압(최고 5.5-V) 홀 효과 래치 Industrial version
비교 대상 장치와 유사한 기능
TMAG5110-Q1 활성 오토모티브, 고감도, 2차원, 듀얼 채널, 홀 효과 래치 2D latch with independent outputs for a one-chip incremental encoding solution
TMAG5111-Q1 활성 오토모티브, 고감도, 2차원, 듀얼 채널, 속도 및 방향 출력, 홀 효과 래치 2D latch with speed & direction outputs for a one-chip incremental encoding solution

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
5개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet DRV5015-Q1 Automotive Low-Voltage, High-Sensitivity, Digital-Latch Hall Effect Sensor datasheet (Rev. B) PDF | HTML 2019/04/11
Application brief Introduction to TI Magnetic Sense Simulator Features PDF | HTML 2023/12/05
User guide Texas Instruments' Magnetic Sense Simulator User's Guide PDF | HTML 2023/12/04
Application brief Differences Between Optical and Magnetic Incremental Encoders PDF | HTML 2022/08/17
Application brief Incremental Rotary Encoders (Rev. B) PDF | HTML 2021/12/02

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

HALL-ADAPTER-EVM — 홀 센서 분리 어댑터 평가 모듈

HALL-ADAPTER-EVM을 사용하면 소형 IC와 빠르고 간편하며 저렴한 방식으로 인터페이스할 수 있어 스위치, 래치 및 선형 홀 센서 프로토타입 제작과 테스트 속도가 빨라집니다. 제품에 포함된 Samtec 터미널 스트립을 사용하여 지원되는 홀 센서를 연결하거나 기존 회로에 직접 연결할 수 있습니다. 지원되는 패키지의 전체 목록에는 SOT-23, TO-92, X2SON, SOT-23-5/6, 0.4mm 피치의 2x2 WCSP 및 MSOP-8이 포함됩니다.
사용 설명서: PDF | HTML
TI.com에서 구매할 수 없음
계산 툴

HALL-PROXIMITY-DESIGN Magnetic Sensing Proximity Tool

HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

시뮬레이션 툴

TI-MAGNETIC-SENSE-SIMULATOR TI Magnetic sensing simulation tool

The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. Select from our portfolio of magnetic sensors to thoroughly emulate electro-mechanical performance of your design. The tool supports various magnet (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-23 (DBZ) 3 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상