DRV5021-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 0: –40°C to 150°C ambient operating temperature range
- Device HBM ESD classification level 3A
- Device CDM ESD classification level C6
- Digital unipolar-switch hall sensor
- 2.5-V to 5.5-V operating VCC range
- Magnetic sensitivity options (BOP,
BRP):
- DRV5021A1-Q1: 2.9 mT, 1.8 mT
- DRV5021A2-Q1: 9.2 mT, 7.0 mT
- DRV5021A3-Q1: 17.9 mT, 14.1 mT
- Fast 30-kHz sensing bandwidth
- Open-drain output capable of 20 mA
- Optimized low-voltage architecture
- Integrated hysteresis to enhance noise immunity
- Standard industry
package:
- Surface-mount SOT-23
The DRV5021-Q1 device is a low-voltage, digital-switch, Hall effect sensor for high-speed automotive applications. Operating from a 2.5-V to 5.5-V power supply, the device senses magnetic flux density, and gives a digital output based on predefined magnetic thresholds.
This device senses magnetic fields perpendicular to the face of the package. When the applied magnetic flux density exceeds the magnetic operate point (BOP) threshold, the open-drain output of the device drives a low voltage. When the flux density decreases to less than the magnetic release point (BRP) threshold, the output goes to high impedance. The hysteresis resulting from the separation of BOP and BRP helps prevent output errors caused by input noise. This configuration makes system designs more robust against noise interference.
The device operates consistently across a wide ambient temperature range of –40°C to +150°C.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV5021-Q1 Automotive, low-voltage, unipolar, digital-switch hall effect sensor datasheet | PDF | HTML | 2018. 2. 5 | |
| Application brief | Introduction to TI Magnetic Sense Simulator Features | PDF | HTML | 2023. 12. 5 | ||
| 사용 설명서 | Texas Instruments' Magnetic Sense Simulator User's Guide | PDF | HTML | 2023. 12. 4 | ||
| Application brief | Transition Detection Using Hall-Effect Sensors (Rev. A) | PDF | HTML | 2022. 6. 9 | ||
| 애플리케이션 노트 | HMI Rocker Switch With Hall-Effect Switches | PDF | HTML | 2022. 1. 21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
HALL-ADAPTER-EVM — 홀 센서 분리 어댑터 평가 모듈
TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool
HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool
HALL-PROXIMITY-DESIGN은 자석 및 홀(Hall) 효과 센서 시스템을 위한 신속한 반복 설계를 도와주는 소프트웨어 도구입니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.