계산 툴
HALL-PROXIMITY-DESIGN — Magnetic Sensing Proximity Tool
HALL-PROXIMITY-DESIGN is a software tool that facilitates rapid iterative design for magnet and Hall-effect sensor systems.
TMAG5131-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Z-axis Hall-effect switch
- Ultra-low power consumption (typical ICC(AVG)):
- 10Hz version: 1.25µA at 3V
- 20Hz versions: 1.37µA at 3V
- Operating VCC range: 1.65V to 5.5V
- High-precision magnetic thresholds (typical BOP):
- 1.8mT with 0.6mT hysteresis
- 3mT with 1.2mT or 1.5mT hysteresis
- Omnipolar or unipolar magnetic response
- Push-pull or open-drain output options
- Active-low or active-high output options
- Industry-standard SOT-23 (DBZ) package
The TMAG5131-Q1 is a low-power, low-voltage, high-precision, Hall-effect sensor, designed for the most compact and battery-critical automotive applications. The device is offered in multiple magnetic thresholds, sampling rates and output types to accommodate various applications.
When the applied magnetic flux density exceeds the operating point (BOP) threshold, the device outputs a low voltage (for active-low versions). The output stays low until the flux density decreases to less than the release point (BRP), at which point the device outputs a high voltage. The output (low/high) behavior is inversed for active high versions. The omnipolar magnetic response allows the device output to be sensitive to positive and negative magnetic flux through the Z-axis of the package, while the unipolar version responds only to a positive magnetic flux.
The TMAG5131-Q1 is internally power cycled to operate at a very low current consumption. At 3V, the 10Hz version has an average current consumption of 1.25µA, and the 20Hz versions consume 1.37µA.
The TMAG5131-Q1 is available in an industry-standard SOT-23 package and pin out.
The device operates at a VCC range of 1.65V to 5.5V as well as an extended temperature range of –40°C to 125°C.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
기술 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기7 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TMAG5131-Q1 Automotive Low-Power, High-Precision, Hall-Effect Switch datasheet (Rev. B) | PDF | HTML | 2024/02/22 |
| Application note | Automotive Door Handle Design with Position Sensors | PDF | HTML | 2024/04/10 | |
| Application brief | Introduction to TI Magnetic Sense Simulator Features | PDF | HTML | 2023/12/05 | |
| User guide | Texas Instruments' Magnetic Sense Simulator User's Guide | PDF | HTML | 2023/12/04 | |
| Product overview | Introduction to Hall-Effect Sensors (Rev. A) | PDF | HTML | 2023/05/10 | |
| White paper | Using Hall-Effect Sensors For Contactless Rotary Encoding and Knob Applications (Rev. A) | PDF | HTML | 2023/05/01 | |
| Application note | HMI Rocker Switch With Hall-Effect Switches | PDF | HTML | 2022/01/21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
HALL-ADAPTER-EVM — 홀 센서 분리 어댑터 평가 모듈
Speed up your switch, latch and linear Hall sensor prototyping and testing with the HALL-ADAPTER-EVM, which provides a fast, easy and inexpensive way to interface with small ICs. You can connect any supported Hall sensor using the included Samtec terminal strips or wire them directly to existing (...)
시뮬레이션 툴
TI-MAGNETIC-SENSE-SIMULATOR — TI Magnetic sensing simulation tool
The TI-MAGNETIC-SENSE-SIMULATOR (TIMSS) webtool estimates magnetic flux density and TI magnetic sensor outputs for magnetic position sensing systems. The tool has device emulation and supports various magnet shapes, grades and motion types.
지원되는 제품 및 하드웨어
제품
홀 효과 래치 및 스위치
선형 홀 효과 센서
멀티 축 선형 및 각도 위치 센서
하드웨어 개발
소프트웨어
계산 툴
| 패키지 | 핀 | 다운로드 |
|---|---|---|
| SOT-23 (DBZ) | 3 | 옵션 보기 |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.