DRV8300U
- 100V Three Phase
Half-Bridge Gate driver
- Drives N-Channel MOSFETs (NMOS)
- Gate Driver Supply (GVDD): 5-20V
- MOSFET supply (SHx) support up to 100V
- Integrated Bootstrap Diodes (DRV8300UD devices)
- Supports Inverting and Non-Inverting INLx inputs
- Bootstrap gate drive architecture
- 750mA source current
- 1.5A sink current
- Supports up to 15S battery powered applications
- Higher BSTUV (8V typ) and GVDDUV (7.6V typ) threshold to support standard MOSFETs
- Low leakage current on SHx pins (<55µA)
- Absolute maximum BSTx voltage up to 125V
- Supports negative transients up to -22V on SHx
- Built-in cross conduction prevention
- Adjustable deadtime through DT pin for QFN package variants
- Fixed deadtime insertion of 200nS for TSSOP package variants
- Supports 3.3V and 5V logic inputs with 20V Abs max
- 4nS typical propagation delay matching
- Compact QFN and TSSOP packages
- Efficient system design with Power Blocks
- Integrated protection features
- BST undervoltage lockout (BSTUV)
- GVDD undervoltage (GVDDUV)
DRV8300U is 100V three half-bridge gate drivers, capable of driving high-side and low-side N-channel power MOSFETs. The DRV8300UD generates the correct gate drive voltages using an integrated bootstrap diode and external capacitor for the high-side MOSFETs. GVDD is used to generate gate drive voltage for the low-side MOSFETs. The Gate Drive architecture supports peak up to 750mA source and 1.5A sink currents.
The phase pins SHx is able to tolerate the significant negative voltage transients; while high side gate driver supply BSTx and GHx is able to support to higher positive voltage transients (125V) abs max voltage which improves robustness of the system. Small propagation delay and delay matching specifications minimize the dead-time requirement which further improves efficiency. Undervoltage protection is provided for both low and high side through GVDD and BST undervoltage lockout.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV8300U: 100V Three-Phase BLDC Gate Driver datasheet (Rev. B) | PDF | HTML | 2025. 6. 24 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8300DIPW-EVM — 3상 BLDC용 DRV8300DIPW 평가 모듈(EVM)
DRV8300DIPW-EVM은 BLDC 모터용 DRV8300DIPW 게이트 드라이버를 기반으로 하는 30A, 3상 브러시리스 DC 드라이브 단계입니다. DRV8300DIPW은 외부 다이오드 없이 부트스트랩 작동을 위한 3개의 다이오드를 통합합니다.
EVM에는 저압측 전류 측정을 위한 3개의 전류 션트 증폭기와 PVDD/GVDD 전압 및 보드 온도에 대한 피드백이 포함되어 있습니다. 최대 100V를 EVM에 공급할 수 있으며 온보드 벅은 부트스트랩 GVDD 공급에 필요한 12V를 생성합니다. 사용자 피드백을 위해 모든 전원 공급 (...)
DRV8300DRGE-EVM — DRV8300DRGE 3상 BLDC 평가 모듈
DRV8300DRGE-EVM은 BLDC 모터용 DRV8300DRGE 게이트 드라이버를 기반으로 하는 30A, 3상 브러시리스 DC 드라이브 단계입니다.
DRV8300DRGE은 외부 다이오드 없이 부트스트랩 작동을 위한 3개의 다이오드를 통합합니다. EVM에는 저압측 전류 측정을 위한 3개의 전류 션트 증폭기와 PVDD/GVDD 전압 및 보드 온도에 대한 피드백이 포함되어 있습니다. 최대 100V를 EVM에 공급할 수 있으며 온 보드 벅은 부트스트랩 GVDD 공급에 필요한 12V를 생성합니다.
사용자 피드백을 위해 모든 전원 공급 (...)
MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications
MSP 모터 제어는 MSPM0 Arm® Cortex® M0+ MCU 및 인기 있는 모터 드라이버 솔루션으로 30분 이내에 모터를 구동하는 소프트웨어, 툴 및 예제 모음입니다.
MSP 모터 제어는 성능, 통합 및 사용 편의성에 최적화된 센서드 및 센서리스 제어 알고리즘을 사용하여 브러시드, 스테퍼 및 3상 모터를 구동하는 지원되는 하드웨어 키트에 대한 예제를 제공합니다. 지금 하드웨어를 주문하고, 모터를 연결하고, 당사의 그래픽 사용자 인터페이스나 온라인 코드 예제를 사용하여 모터를 회전시켜 보십시오.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 20 | Ultra Librarian |
| VQFN (RGE) | 24 | Ultra Librarian |