DRV8353R
- 9 to 100-V,
Triple half-bridge gate driver
- Optional integrated buck regulator
- Optional triple low-side current shunt amplifiers
- Smart gate drive
architecture
- Adjustable slew rate control for EMI performance
- VGS handshake and minimum dead-time insertion to prevent shoot-through
- 50-mA to 1-A peak source current
- 100-mA to 2-A peak sink current
- dV/dt mitigation through strong pulldown
- Integrated gate driver power
supplies
- High-side doubler charge pump For 100% PWM duty cycle control
- Low-side linear regulator
- Integrated
LM5008A buck
regulator
- 6 to 95-V operating voltage range
- 2.5 to 75-V, 350-mA output capability
- Integrated triple current
shunt amplifiers
- Adjustable gain (5, 10, 20, 40 V/V)
- Bidirectional or unidirectional support
- 6x, 3x, 1x, and independent PWM
modes
- Supports 120° sensored operation
- SPI or hardware interface available
- Low-power sleep mode (20 µA at VVM = 48-V)
- Integrated protection features
- VM undervoltage lockout (UVLO)
- Gate drive supply undervoltage (GDUV)
- MOSFET VDS overcurrent protection (OCP)
- MOSFET shoot-through prevention
- Gate driver fault (GDF)
- Thermal warning and shutdown (OTW/OTSD)
- Fault condition indicator (nFAULT)
The DRV835x family of devices are highly-integrated gate drivers for three-phase brushless DC (BLDC) motor applications. These applications include field-oriented control (FOC), sinusoidal current control, and trapezoidal current control of BLDC motors. The device variants provide optional integrated current shunt amplifiers to support different motor control schemes and a buck regulator to power the gate driver or external controller.
The DRV835x uses smart gate drive (SGD) architecture to decrease the number of external components that are typically necessary for MOSFET slew rate control and protection circuits. The SGD architecture also optimizes dead time to prevent shoot-through conditions, provides flexibility in decreasing electromagnetic interference (EMI) by MOSFET slew rate control, and protects against gate short circuit conditions through VGS monitors. A strong gate pulldown circuit helps prevent unwanted dV/dt parasitic gate turn on events
Various PWM control modes (6x, 3x, 1x, and independent) are supported for simple interfacing to the external controller. These modes can decrease the number of outputs required of the controller for the motor driver PWM control signals. This family of devices also includes 1x PWM mode for simple sensored trapezoidal control of a BLDC motor by using an internal block commutation table.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8353RH-EVM — DRV8353RH EVM(평가 모듈), 3상 브러시리스 DC 스마트 게이트 드라이버
DRV8353RH-EVM은 DRV8353RH 게이트 드라이버 및 CSD19532Q5B NexFET™ MOSFET을 기반으로 하는 15A, 3상 브러시리스 DC 구동계입니다.
이 EVM(평가 모듈)에는 개별 DC 버스 및 위상 전압 감지와 개별 저압측 전류 션트 증폭기가 있어 센서리스 BLDC 알고리즘에 이상적입니다. 이 모듈은 통합 0.35A 스텝 다운 벅 레귤레이터로 MCU 3.3V 전원을 공급합니다. 구동계에는 특정 저항 값으로 구성된 쉽게 구성 가능한 하드웨어 인터페이스를 통해 단락, 열, 슛스루 및 저전압 조건에 대한 (...)
DRV8353RS-EVM — DRV8353RS 평가모듈(EVM), 3상 브러시리스 DC 스마트 게이트 드라이버
DRV8353RS-EVM은 DRV8353RS 게이트 드라이버 및 CSD19532Q5B NexFET™ MOSFET을 기반으로 하는 15A, 3상 브러시리스 DC 구동계입니다.
이 EVM(평가 모듈)에는 개별 DC 버스 및 위상 전압 감지와 개별 저압측 전류 션트 증폭기가 있어 센서리스 BLDC 알고리즘에 이상적입니다. 이 모듈은 통합 0.35A 스텝 다운 벅 레귤레이터로 MCU 3.3V 전원을 공급합니다. 이 구동계에는 구성 가능한 SPI를 통한 단락, 열, 슛스루 및 저전압 상태에 대한 보호 기능 및 오류용 핀과 함께 (...)
MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications
MSP 모터 제어는 MSPM0 Arm® Cortex® M0+ MCU 및 인기 있는 모터 드라이버 솔루션으로 30분 이내에 모터를 구동하는 소프트웨어, 툴 및 예제 모음입니다.
MSP 모터 제어는 성능, 통합 및 사용 편의성에 최적화된 센서드 및 센서리스 제어 알고리즘을 사용하여 브러시드, 스테퍼 및 3상 모터를 구동하는 지원되는 하드웨어 키트에 대한 예제를 제공합니다. 지금 하드웨어를 주문하고, 모터를 연결하고, 당사의 그래픽 사용자 인터페이스나 온라인 코드 예제를 사용하여 모터를 회전시켜 보십시오.
BLDC-MAX-QG-MOSFET-CALCULATOR — Calculate the maximum QG MOSFET for your motor driver
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |