DS26F31MQML-SP

활성

Radiation-hardened, QML-V, Quad High Speed Differential Line Drivers

제품 상세 정보

Number of receivers 0 Number of transmitters 4 Duplex Half Signaling rate (max) (Mbps) 10 IEC 61000-4-2 contact (±V) None Common-mode range (V) -6 to 6 Number of nodes 10 Isolated No Supply current (max) (µA) 40000 Rating Space Operating temperature range (°C) -55 to 125
Number of receivers 0 Number of transmitters 4 Duplex Half Signaling rate (max) (Mbps) 10 IEC 61000-4-2 contact (±V) None Common-mode range (V) -6 to 6 Number of nodes 10 Isolated No Supply current (max) (µA) 40000 Rating Space Operating temperature range (°C) -55 to 125
CFP (NAD) 16 62.9285 mm² (— mm × — mm)
  • Operation from Single +5.0V Supply
  • Outputs Won't Load Line When VCC = 0V
  • Output Short Circuit Protection
  • Meets the Requirements of EIA Standard RS-422
  • High Output Drive Capability for 100Ω Terminated Transmission Lines

All trademarks are the property of their respective owners.

  • Operation from Single +5.0V Supply
  • Outputs Won't Load Line When VCC = 0V
  • Output Short Circuit Protection
  • Meets the Requirements of EIA Standard RS-422
  • High Output Drive Capability for 100Ω Terminated Transmission Lines

All trademarks are the property of their respective owners.

The DS26F31M is a quad differential line driver designed for digital data transmission over balanced lines. The DS26F31M meets all the requirements of EIA Standard RS-422 and Federal Standard 1020. It is designed to provide unipolar differential drive to twisted-pair or parallel-wire transmission lines.

The DS26F31M offers improved performance due to the use of state-of-the-art L-FAST bipolar technology. The L-FAST technology allows for higher speeds and lower currents by utilizing extremely short gate delay times. Thus, the DS26F31M features lower power, extended temperature range, and improved specifications.

The circuit provides an enable and disable function common to all four drivers. The DS26F31M features TRI-STATE outputs and logical OR-ed complementary enable inputs. The inputs are all LS compatible and are all one unit load.

The DS26F31M offers optimum performance when used with the DS26F32 Quad Differential Line Receiver.

The DS26F31M is a quad differential line driver designed for digital data transmission over balanced lines. The DS26F31M meets all the requirements of EIA Standard RS-422 and Federal Standard 1020. It is designed to provide unipolar differential drive to twisted-pair or parallel-wire transmission lines.

The DS26F31M offers improved performance due to the use of state-of-the-art L-FAST bipolar technology. The L-FAST technology allows for higher speeds and lower currents by utilizing extremely short gate delay times. Thus, the DS26F31M features lower power, extended temperature range, and improved specifications.

The circuit provides an enable and disable function common to all four drivers. The DS26F31M features TRI-STATE outputs and logical OR-ed complementary enable inputs. The inputs are all LS compatible and are all one unit load.

The DS26F31M offers optimum performance when used with the DS26F32 Quad Differential Line Receiver.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능.
AM26LV31E 활성 +/-15kV IEC ESD 보호를 지원하는 저압 고속 쿼드러플 차동 라인 드라이버 Catalog version
DS26F32MQML-SP 활성 Radiation-hardened, QML-V, Quad Differential Line Receivers Companion Quad Differential Line Receivers

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
11개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 DS26F31MQML Quad High Speed Differential Line Drivers datasheet (Rev. A) 2013. 4. 15
* 방사능 및 안정성 보고서 DS26F31MQML-SP Total Ionizing Dose (TID) Report 2012. 5. 9
* SMD DS26F31MQML-SP SMD 5962F7802302VFA 2016. 6. 21
선택 가이드 TI Space Products (Rev. L) 2026. 3. 27
Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 2025. 6. 17
애플리케이션 노트 Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) PDF | HTML 2025. 6. 10
추가 자료 TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 2025. 2. 20
애플리케이션 노트 Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 2022. 10. 19
Application brief Space-Grade, 100-krad, Isolated Serial Peripheral Interface (SPI) RS-422 Circuit PDF | HTML 2021. 6. 30
Application brief Space-Grade, 100-krad, Isolated Serial Peripheral Interface (SPI) LVDS Circuit PDF | HTML 2021. 6. 29
e북 Radiation Handbook for Electronics (Rev. A) 2019. 5. 21

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

패키지 CAD 기호, 풋프린트 및 3D 모델
CFP (NAD) 16 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상