LM140QML
- Complete Specifications at 1.0A and 0.5A Loads
- No External Components
- Internal Thermal Overload Protection
- Internal Short Circuit Current-Limiting
- Output Transistor Safe-Area Compensation
All trademarks are the property of their respective owners.
The monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 0.5A output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) regulation for elimination of noise and distribution problems associated with single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents.
Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM140QML Three Terminal Positive Regulators datasheet (Rev. B) | 2013. 5. 1 | ||
| 애플리케이션 노트 | A Topical Index of TI LDO Application Notes (Rev. F) | 2019. 6. 27 | |||
| 애플리케이션 노트 | AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B) | 2013. 5. 6 | |||
| 애플리케이션 노트 | AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A) | 2013. 5. 6 | |||
| 애플리케이션 노트 | Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A) | 2013. 5. 5 | |||
| 애플리케이션 노트 | Packaging Limits Range of Linear Regulators | 2010. 5. 8 | |||
| 애플리케이션 노트 | Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A) | 2008. 6. 4 | |||
| 애플리케이션 노트 | Understanding the Terms and Definitions of LDO Voltage Regulators | 1999. 10. 21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DIESALE (Y) | — | Ultra Librarian |
| TO-CAN (NDT) | 3 | Ultra Librarian |
| TO-CAN (K) | 2 | Ultra Librarian |