LM22678

활성

정밀 활성화를 지원하는 SIMPLE SWITCHER® 4.5V~42V, 5A 스텝다운 전압 레귤레이터

지금 주문하기

데이터 시트

document-pdfAcrobat LM22678/-Q1 42-V, 5-A SIMPLE SWITCHER® Step-Down Voltage Regulator With Easy-to-Use Package datasheet (Rev. M) (영어) PDF | HTML

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능

TLVM13660

활성

5mm x 5.5mm 향상된 HotRod™ QFN의 고밀도 36V 입력, 1V~6V 출력, 6A 전원 모듈 Save board space, simplify design and speed time to market with an integrated-inductor power module.

TPSM63606

활성

5mm x 5.5mm 향상된 HotRod™ QFN의 고밀도 36V 입력, 1V~16V 출력, 6A 전원 모듈 Save board space, simplify design, and speed up time to market with an integrated-inductor power module.

LM22678

활성

데이터 시트

지금 주문하기

제품 상세 정보

Rating

Catalog

Topology

Buck

Iout (max) (A)

5

Vin (max) (V)

42

Vin (min) (V)

4.5

Vout (max) (V)

37

Vout (min) (V)

1.285

Features

Enable, Over Current Protection

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.0034

Duty cycle (max) (%)

90

Rating

Catalog

Topology

Buck

Iout (max) (A)

5

Vin (max) (V)

42

Vin (min) (V)

4.5

Vout (max) (V)

37

Vout (min) (V)

1.285

Features

Enable, Over Current Protection

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.0034

Duty cycle (max) (%)

90

TO-263 (NDR)

7

142.3416 mm² 10.16 x 14.01

New product available: LM61460 3-V to 36-V, 6-A low EMI synchronous converter
Wide input voltage range: 4.5 V to 42 V
Internally compensated voltage mode control
Stable with low-ESR ceramic capacitors
100-mΩ N-channel MOSFET
Output voltage options: -ADJ (outputs as low as 1.285 V) -5.0 (output fixed to 5 V)
±1.5% Feedback reference accuracy
Switching frequency of 500 kHz
–40°C to 125°C Operating junction temperature range
Precision enable pin
Integrated bootstrap diode
Integrated soft start
Fully WEBENCH enabled
LM22678-Q1 is an automotive-grade product that is AEC-Q100 grade 1 qualified (–40°C to +125°C operating junction temperature)
PFM (exposed pad) package

New product available: LM61460 3-V to 36-V, 6-A low EMI synchronous converter
Wide input voltage range: 4.5 V to 42 V
Internally compensated voltage mode control
Stable with low-ESR ceramic capacitors
100-mΩ N-channel MOSFET
Output voltage options: -ADJ (outputs as low as 1.285 V) -5.0 (output fixed to 5 V)
±1.5% Feedback reference accuracy
Switching frequency of 500 kHz
–40°C to 125°C Operating junction temperature range
Precision enable pin
Integrated bootstrap diode
Integrated soft start
Fully WEBENCH enabled
LM22678-Q1 is an automotive-grade product that is AEC-Q100 grade 1 qualified (–40°C to +125°C operating junction temperature)
PFM (exposed pad) package

The LM22678 switching regulator provides all of the functions necessary to implement an efficient high-voltage step-down (buck) regulator using a minimum of external components. This easy-to-use regulator incorporates a 42-V N-channel MOSFET switch that can provide up to 5 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5-V output and adjustable output voltage options are available. A switching frequency of 500 kHz allows for small external components and good transient response. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typical). Built-in soft-start (500 µs, typical) saves external components. The LM22678 device also has built-in thermal shutdown, and current limiting to protect against accidental overloads.

The new product, LM61460, offers higher efficiency, lower stand-by quiescent current, and improved EMI performance. See the device comparison table to compare.Start WEBENCH design with LM61460

The LM22678 device is a member of Texas Instruments’ SIMPLE SWITCHER family. The SIMPLE SWITCHER concept provides for an easy-to-use complete design using a minimum number of external components and the TI WEBENCH design tool. TI’s WEBENCH tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.

The LM22678 switching regulator provides all of the functions necessary to implement an efficient high-voltage step-down (buck) regulator using a minimum of external components. This easy-to-use regulator incorporates a 42-V N-channel MOSFET switch that can provide up to 5 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5-V output and adjustable output voltage options are available. A switching frequency of 500 kHz allows for small external components and good transient response. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typical). Built-in soft-start (500 µs, typical) saves external components. The LM22678 device also has built-in thermal shutdown, and current limiting to protect against accidental overloads.

The new product, LM61460, offers higher efficiency, lower stand-by quiescent current, and improved EMI performance. See the device comparison table to compare.Start WEBENCH design with LM61460

The LM22678 device is a member of Texas Instruments’ SIMPLE SWITCHER family. The SIMPLE SWITCHER concept provides for an easy-to-use complete design using a minimum number of external components and the TI WEBENCH design tool. TI’s WEBENCH tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.

filter

기타 DC/DC 컨버터 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

21개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	Data sheet	LM22678/-Q1 42-V, 5-A SIMPLE SWITCHER® Step-Down Voltage Regulator With Easy-to-Use Package datasheet (Rev. M)	PDF \| HTML	2020/10/23
	Application note	SIMPLE SWITCHER Regulators Take Over Automotive Applications (Rev. B)	PDF \| HTML	2024/10/09
	Application note	Semiconductor and IC Package Thermal Metrics (Rev. D)	PDF \| HTML	2024/03/25
	Selection guide	Power Management Guide 2018 (Rev. R)		2018/06/25
	Application note	Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)		2014/09/12
	Application note	AN-1533 Overvoltage Protection Circuit for Automotive Load Dump (Rev. B)		2013/05/06
	Application note	AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A)		2013/05/06
	Application note	AN-1797 TO-263 THIN Package (Rev. A)		2013/04/24
	Application note	AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)		2013/04/24
	Application note	AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)		2013/04/23
	Application note	AN-1197 Selecting Inductors for Buck Converters (Rev. B)		2013/04/23
	Application note	AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)		2013/04/23
	Application note	AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)		2013/04/23
	Application note	AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)		2013/04/23
	Application note	AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)		2013/04/23
	Application note	AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)		2013/04/23
	Application note	AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)		2013/04/23
	Design guide	SIMPLE SWITCHER® Design Guide		2011/04/11
	Application note	Input and Output Capacitor Selection		2005/09/19
	More literature	SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations		2005/07/12
	Application note	AN-643 EMI/RFI Board Design (Rev. B)		2004/05/03