홈 전력 관리 DC/DC switching regulators DC/DC converters
홈
전력 관리
DC/DC switching regulators
DC/DC converters

LM25574-Q1

활성

42V, 0.5A 스텝다운 스위칭 레귤레이터

지금 주문
데이터 시트

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS560430-Q1 활성 차량용, 4V~36V, 0.6A 동기 스텝다운 SIMPLE SWITCHER® 전력 컨버터 Smaller footprint in SOT-23 package, integrated compensation and synchronous rectification.

LM25574-Q1

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Automotive Topology Buck Iout (max) (A) 0.5 Vin (max) (V) 42 Vin (min) (V) 6 Vout (max) (V) 40 Vout (min) (V) 1.23 Features Frequency synchronization, Over Current Protection, Soft Start Adjustable Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.001 Duty cycle (max) (%) 95
Rating Automotive Topology Buck Iout (max) (A) 0.5 Vin (max) (V) 42 Vin (min) (V) 6 Vout (max) (V) 40 Vout (min) (V) 1.23 Features Frequency synchronization, Over Current Protection, Soft Start Adjustable Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.001 Duty cycle (max) (%) 95
TSSOP (PW) 16 32 mm² 5 x 6.4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
  • Integrated 42-V, 750-mΩ N-Channel MOSFET
  • Ultra-Wide Input Voltage From 6 V to 42 V
  • Adjustable Output Voltage as Low as 1.225 V
  • 1.5% Feedback Reference Accuracy
  • Operating Frequency Adjustable Between 50 kHz and 1 MHz With Single Resistor
  • Master or Slave Frequency Synchronization
  • Adjustable Soft-Start
  • Emulated Current Mode Control Architecture
  • Wide Bandwidth Error Amplifier
  • Built-In Protection
  • TSSOP-16 Package
  • Create a Custom Design Using the LM25574-Q1 With the WEBENCH® Power Designer
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
  • Integrated 42-V, 750-mΩ N-Channel MOSFET
  • Ultra-Wide Input Voltage From 6 V to 42 V
  • Adjustable Output Voltage as Low as 1.225 V
  • 1.5% Feedback Reference Accuracy
  • Operating Frequency Adjustable Between 50 kHz and 1 MHz With Single Resistor
  • Master or Slave Frequency Synchronization
  • Adjustable Soft-Start
  • Emulated Current Mode Control Architecture
  • Wide Bandwidth Error Amplifier
  • Built-In Protection
  • TSSOP-16 Package
  • Create a Custom Design Using the LM25574-Q1 With the WEBENCH® Power Designer

The LM25574-Q1 is an easy to use buck regulator which allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6 V to 42 V, the LM25574-Q1 delivers 0.5-A of continuous output current with an integrated 750-mΩ N-Channel MOSFET. The regulator utilizes an Emulated Current Mode architecture which provides inherent line regulation, tight load transient response, and ease of loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50 kHz to 1-MHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple IC’s from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM25574-Q1 guarantees robustness with cycle-by-cycle current limit, short-circuit protection, thermal shut-down, and remote shut-down. The device is available in a TSSOP-16 package.

The LM25574-Q1 is an easy to use buck regulator which allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6 V to 42 V, the LM25574-Q1 delivers 0.5-A of continuous output current with an integrated 750-mΩ N-Channel MOSFET. The regulator utilizes an Emulated Current Mode architecture which provides inherent line regulation, tight load transient response, and ease of loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50 kHz to 1-MHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple IC’s from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM25574-Q1 guarantees robustness with cycle-by-cycle current limit, short-circuit protection, thermal shut-down, and remote shut-down. The device is available in a TSSOP-16 package.

filter 기타 DC/DC converters 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LMR34206-Q1 활성 4.2V~42V, 0.6A 초소형 동기 강압 컨버터 Next-generation 4.2-V to 42-V, 0.6-A ultra-small synchronous step-down converter.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
18개 모두 보기
유형 직함 날짜
* Data sheet LM25574-Q1 42-V, 0.5-A Step-Down Switching Regulator datasheet PDF | HTML 2017/10/13
Application note Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/03/25
White paper Overcoming Challenges in Designing Step-Dwn Reg Apps w/40V Input Voltage (Rev. A) 2018/07/03
Application note Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014/09/12
Application note AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A) 2013/05/06
Application note AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013/04/24
Application note AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013/04/23
Application note AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013/04/23
Application note AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013/04/23
Application note AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013/04/23
Application note AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013/04/23
Application note AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013/04/23
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/04/23
Application note AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013/04/23
Application note Understanding and Applying Current-Mode Control Theory 2007/08/19
Application note Input and Output Capacitor Selection 2005/09/19
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/07/12
Application note AN-643 EMI/RFI Board Design (Rev. B) 2004/05/03

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

LM25574 Non-Inverting and Inverting PSpice Transient Model (Rev. A)

SNVM293A.ZIP (120 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM25574 PSpice Average Model

SNVM294.ZIP (56 KB) - PSpice Model
다운로드
시뮬레이션 모델

LM25574 Unencrypted PSpice Average Model

SNVM868.ZIP (2 KB) - PSpice Model
다운로드
계산 툴

LM2557X-557XQUICK-CALC — LM(2)557x 빠른 시작 SIMPLE SWITCHER 구성 요소 계산기

다운로드
계산 툴

SIMPLESWITCHER-COMPONENT-CALC — 다운로드 가능한 LM(2)557x 빠른 시작 SIMPLE SWITCHER 구성 요소 계산기

다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
TSSOP (PW) 16 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상