LM26003

활성

고효율 절전 모드를 지원하는 3A 스위칭 레귤레이터

지금 주문

데이터 시트

document-pdfAcrobat LM26003-xx 3-A Switching Regulator With High Efficiency Sleep Mode datasheet (Rev. F) (영어) PDF | HTML

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

이 제품은 기존 고객을 위해 계속 제공됩니다. 새로운 설계는 대체 제품을 고려해야 합니다.

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능

LMQ66430

활성

3.5µA IQ를 지원하는 36V, 1A 저 EMI 동기 스텝다운 컨버터 Integrated input bypass capacitor and boot cap for lower EMI and smaller footprint, dual-random spread spectrum and lower IQ.

LM26003

활성

데이터 시트

지금 주문

제품 상세 정보

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

3

Vin (min) (V)

3

Vin (max) (V)

38

Switching frequency (min) (kHz)

150

Switching frequency (max) (kHz)

500

Features

Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up

Control mode

current mode

Vout (min) (V)

1.25

Vout (max) (V)

35

Iq (typ) (µA)

40

Duty cycle (max) (%)

98

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

3

Vin (min) (V)

3

Vin (max) (V)

38

Switching frequency (min) (kHz)

150

Switching frequency (max) (kHz)

500

Features

Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up

Control mode

current mode

Vout (min) (V)

1.25

Vout (max) (V)

35

Iq (typ) (µA)

40

Duty cycle (max) (%)

98

HTSSOP (PWP)

20

41.6 mm² 6.5 x 6.4

LM26003-Q1 is an Automotive-Grade Product
That is AEC-Q100 Grade 1 Qualified (–40°C to
+125°C Operating Junction Temperature)
High-Efficiency Sleep Mode
40-µA Typical Iq in Sleep Mode
10.8-µA Typical Iq in Shutdown Mode
3.0-V Minimum Input Voltage
4.0-V to 38-V Continuous Input Range
1.5% Reference Accuracy
Cycle-by-Cycle Current Limit
Adjustable Frequency (150 kHz to 500 kHz)
Synchronizable to an External Clock
Power Good Flag
Forced PWM Function
Adjustable Soft-Start
20-Pin HTSSOP Package
Thermal Shut Down

LM26003-Q1 is an Automotive-Grade Product
That is AEC-Q100 Grade 1 Qualified (–40°C to
+125°C Operating Junction Temperature)
High-Efficiency Sleep Mode
40-µA Typical Iq in Sleep Mode
10.8-µA Typical Iq in Shutdown Mode
3.0-V Minimum Input Voltage
4.0-V to 38-V Continuous Input Range
1.5% Reference Accuracy
Cycle-by-Cycle Current Limit
Adjustable Frequency (150 kHz to 500 kHz)
Synchronizable to an External Clock
Power Good Flag
Forced PWM Function
Adjustable Soft-Start
20-Pin HTSSOP Package
Thermal Shut Down

The LM26003 is a switching regulator designed for the high-efficiency requirements of applications with standby modes. The device features a low-current sleep mode to maintain efficiency under light-load conditions and current-mode control for accurate regulation over a wide input voltage range. Quiescent current is reduced to 10.8 µA typically in shutdown mode and less than 40 µA in sleep mode. Forced PWM mode is also available to disable sleep mode.

The LM26003 device can deliver up to 3 A of continuous load current with a fixed current limit, through the internal N-channel switch. The part has a wide input voltage range of 4.0 V to 38 V and can operate with input voltages as low as 3 V during line transients.

Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can be synchronized to an external clock.

Other features include Power Good, adjustable soft-start, enable pin, input undervoltage protection, and an internal bootstrap diode for reduced component count.

The LM26003 is a switching regulator designed for the high-efficiency requirements of applications with standby modes. The device features a low-current sleep mode to maintain efficiency under light-load conditions and current-mode control for accurate regulation over a wide input voltage range. Quiescent current is reduced to 10.8 µA typically in shutdown mode and less than 40 µA in sleep mode. Forced PWM mode is also available to disable sleep mode.

The LM26003 device can deliver up to 3 A of continuous load current with a fixed current limit, through the internal N-channel switch. The part has a wide input voltage range of 4.0 V to 38 V and can operate with input voltages as low as 3 V during line transients.

Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can be synchronized to an external clock.

Other features include Power Good, adjustable soft-start, enable pin, input undervoltage protection, and an internal bootstrap diode for reduced component count.

filter

기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

5개 모두 보기

	유형	직함		날짜
*	Data sheet	LM26003-xx 3-A Switching Regulator With High Efficiency Sleep Mode datasheet (Rev. F)	PDF \| HTML	2015/02/06
	Selection guide	Power Management Guide 2018 (Rev. R)		2018/06/25
	Technical article	Design an automotive cluster power supply	PDF \| HTML	2015/10/16
	Technical article	Spread Spectrum: Headache tablet or vitamin pill?	PDF \| HTML	2015/05/18
	EVM User's guide	AN-1884 LM26003 Evaluation Board (Rev. B)		2013/04/24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM26003EVAL — LM26003 - 고효율 절전 모드를 지원하는 3A 스위칭 레귤레이터 평가 모듈

The LM26003 evaluation board is designed to demonstrate the capabilities of the LM26003 switching regulator. The LM26003 eval board can be configured to provide an output of 3.3V at up to 3A from the input range of 4V to 38V. The nominal operating frequency is 300kHz and can be synchronized from (...)

사용 설명서: PDF