LM337-N
- 1.5-A Output Current
- Line Regulation 0.01%/V (Typical)
- Load Regulation 0.3% (Typical)
- 77-dB Ripple Rejection
- 50 ppm/°C Temperature Coefficient
- Thermal Overload Protection
- Internal Short-Circuit Current Limiting
Protections
The LM137 and LM337-N are adjustable 3-terminal negative voltage regulators capable of supplying 1.5 A or more currents over an output voltage range of 1.25 V to 37 V. It requires only two external resistors to set the output voltage and one output capacitor for frequency compensation. The circuit design has been optimized for excellent regulation and low thermal transients. Further, the LM137 and LM337-N feature internal current limiting, thermal shutdown and safe-area compensation, making it virtually blowout-proof against overloads.
The LM137 and LM337-N are ideal complements to the LM117 and LM317 adjustable positive regulators. The LM137 has a wider operating temperature range than the LM337-N and is also offered in military and space qualified versions.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | LM137, LM337-N 3-Terminal Adjustable Negative Regulators datasheet (Rev. E) | PDF | HTML | 2016/01/13 |
| Application note | Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A) | 2013/05/05 | ||
| Application note | LB-46 A New Production Technique for Trimming Voltage Regulators | 2004/05/15 | ||
| Application note | A New Production Technique for Trimming Voltage Regulators | 2002/10/03 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM317A-337N-EVM — 3핀 조정 가능 레귤레이터 평가 모듈
LM317A-337N-EVM은 LM317A 조정 가능한 레귤레이터와 음극 보수인 LM337-N의 정식 애플리케이션을 보여줍니다. EVM(평가 모듈)은 각 장치의 SOT-223 패키지 옵션과 함께 조립되어 최대 1A의 부하 전류를 공급합니다. 이 EVM은 1.5A 작동을 위해 장치의 TO-220 버전을 채우도록 쉽게 수정할 수 있습니다. 이 EVM은 개인 커패시터 선택을 위한 충분한 풋프린트 공간과 4개의 구리 레이어, 히트 싱크 공간이 있어 탁월한 전력 손실을 구현할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-223 (DCY) | 4 | Ultra Librarian |
| TO-220 (NDE) | 3 | Ultra Librarian |
| TO-220 (NDG) | 3 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.